TLE2022ACPG4 Equivalent & Substitute Parts

Part Overview

The TLE2022ACPG4 is a general-purpose operational amplifier manufactured by Texas Instruments, featuring two independent circuits in an 8-PDIP through-hole package. This device is classified as discontinued at DiGi Electronics, necessitating identification of equivalent substitute components for ongoing design support and procurement. The TLE2022ACPG4 operates across a wide supply voltage range (4V to 40V) and is suitable for applications requiring moderate bandwidth and low input bias current characteristics.

Substiute Parts

TLE2022ACPG4

Texas InstrumentsIn Stock: 1012TLE2022ACPG4 Datasheet

Current PartRFQ

TLE2022ACP

Texas InstrumentsIn Stock: 1057TLE2022ACP Datasheet

MFR RecommendedRFQ

AD828ANZ

Analog Devices Inc.In Stock: 3234AD828ANZ Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TLE2022ACPG4 is determined by strict alignment of the following electrical and mechanical parameters:

Primary Substitution Criteria:

• Number of circuits: 2 independent amplifier stages
• Package type: 8-DIP (0.300", 7.62mm) through-hole configuration
• Mounting type: Through hole
• Supply voltage range compatibility: Minimum 4V, maximum 40V
• Output current capability: Minimum 30 mA per channel
• Input bias current: Maximum 33 nA
• Input offset voltage: Maximum 120 µV
• Operating temperature range: 0°C to 70°C minimum

Identified Substitutes:

1. TLE2022ACP (Texas Instruments) — Direct manufacturer equivalent with identical electrical specifications and package configuration. Differs only in packaging format (tube vs. DIP) and product status (Last Time Buy).

2. AD828ANZ (Analog Devices Inc.) — Cross-manufacturer substitute with superior performance characteristics in bandwidth and slew rate, maintaining package compatibility and dual-circuit configuration. Operates within compatible supply voltage ranges and exceeds output current requirements.

Parameter Comparison

Engineering Selection Recommendations

TLE2022ACP Selection: The TLE2022ACP represents the direct manufacturer equivalent to the TLE2022ACPG4, with identical electrical performance specifications and package configuration. This substitute is appropriate for applications where the original part specifications are the design baseline. Current product status is Last Time Buy, indicating limited future availability. Both parts maintain ROHS3 compliance and equivalent moisture sensitivity ratings.

AD828ANZ Selection: The AD828ANZ is a cross-manufacturer substitute manufactured by Analog Devices Inc. and maintains active product status. This device provides superior performance in slew rate (450 V/µs versus 0.65 V/µs) and bandwidth characteristics (130 MHz -3dB bandwidth), with increased output current capability (50 mA per channel versus 30 mA). The AD828ANZ operates within compatible supply voltage ranges for single-supply applications (5V to 36V) and dual-supply configurations (±2.5V to ±18V). Supply current consumption is significantly lower (14 mA total versus 550 µA per channel). All three devices share identical 8-DIP package configuration, through-hole mounting, and ROHS3 compliance. The AD828ANZ is classified as a voltage feedback amplifier with video amplifier applications, suitable for designs requiring enhanced bandwidth and slew rate performance.

Frequently Asked Questions (FAQ)

Q: Can TLE2022ACP be used as a direct replacement for TLE2022ACPG4?

A: Yes. The TLE2022ACP provides identical electrical specifications, including slew rate (0.65 V/µs), gain bandwidth product (2.8 MHz), input bias current (33 nA), input offset voltage (120 µV), output current (30 mA per channel), and supply voltage range (4V to 40V). Both devices feature two circuits in 8-DIP through-hole packages. The primary difference is packaging format and product status.

Q: What are the key differences between TLE2022ACPG4 and AD828ANZ?

A: The AD828ANZ provides significantly enhanced performance in slew rate (450 V/µs versus 0.65 V/µs) and bandwidth (-3dB bandwidth of 130 MHz versus 2.8 MHz gain bandwidth product). Output current capability is higher (50 mA per channel versus 30 mA). Supply current consumption is substantially lower (14 mA total versus 550 µA per channel). Both devices maintain 8-DIP package compatibility and dual-circuit configuration. The AD828ANZ is classified as a voltage feedback video amplifier, while the TLE2022ACPG4 is a general-purpose amplifier.

Q: Are all three devices compatible with the same PCB footprint?

A: Yes. All three devices—TLE2022ACPG4, TLE2022ACP, and AD828ANZ—use identical 8-DIP (0.300", 7.62mm) through-hole package configuration and pinout, enabling direct PCB footprint compatibility without layout modifications.

Q: What is the supply voltage compatibility range for AD828ANZ?

A: The AD828ANZ operates in single-supply mode from 5V to 36V and in dual-supply mode from ±2.5V to ±18V. The TLE2022ACPG4 and TLE2022ACP operate from 4V to 40V in single-supply configuration. Applications requiring operation below 5V single-supply voltage should use TLE2022ACPG4 or TLE2022ACP.

Q: Which substitute should be selected for new designs?

A: The AD828ANZ is recommended for new designs due to active product status and superior performance characteristics. For designs requiring exact electrical equivalence to the original TLE2022ACPG4 specification, the TLE2022ACP provides identical performance but with limited availability due to Last Time Buy status.

Q: Are all three devices RoHS compliant?

A: Yes. All three devices—TLE2022ACPG4, TLE2022ACP, and AD828ANZ—are ROHS3 compliant and REACH unaffected, meeting environmental regulatory requirements for electronic component procurement.