TLE-114-01-G-DV Equivalent & Substitute Parts

Part Overview

The TLE-114-01-G-DV is a 28-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with surface mount termination. This connector features a 0.079" (2.00mm) pitch, dual-row configuration, and gold-plated contacts rated for 3.2A per contact. The part maintains active product status and is RoHS3 compliant with MSL 1 rating, making it suitable for industrial and commercial applications requiring reliable pass-through connectivity.

Equivalent parts are identified when design requirements necessitate alternative sourcing due to inventory availability, supply chain considerations, or specific feature requirements while maintaining electrical and mechanical compatibility.

Substiute Parts

TLE-114-01-G-DV

Samtec Inc.In Stock: 907TLE-114-01-G-DV Datasheet

Current PartRFQ

TLE-114-01-G-DV-A

Samtec Inc.In Stock: 1703TLE-114-01-G-DV-A Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TLE-114-01-G-DV is determined by strict equivalence across the following critical parameters:

• Connector type (Receptacle, Pass Through)
• Position count (28 positions)
• Mating pitch (0.079" / 2.00mm)
• Row configuration (2 rows with 0.079" spacing)
• Mounting technology (Surface Mount)
• Contact material and finish (Gold-plated phosphor bronze)
• Current rating (3.2A per contact)
• Operating temperature range (-55°C ~ 125°C)
• Insulation material (Liquid Crystal Polymer)
• Compliance certifications (RoHS3, MSL 1)

The TLE-114-01-G-DV-A qualifies as a direct substitute based on identical values across all critical electrical and mechanical parameters. Both parts share the same base product number (TLE-114) and series designation, confirming design compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both the TLE-114-01-G-DV and TLE-114-01-G-DV-A maintain active product status and full RoHS3 compliance. Selection between these parts should be based on the following factors:

The TLE-114-01-G-DV-A includes a board guide feature and specifies gold plating on the post contact finish, providing enhanced mechanical alignment and contact durability. This variant is suitable for applications requiring additional structural support during mating cycles.

The TLE-114-01-G-DV serves applications where the board guide feature is not required and post contact finish specification is not critical to system performance.

Both parts carry identical electrical ratings, temperature specifications, and moisture sensitivity classifications, ensuring functional interchangeability in circuit designs. Inventory availability differs between variants, with TLE-114-01-G-DV-A offering higher stock levels (1675 pcs vs. 850 pcs).

Frequently Asked Questions (FAQ)

Q: Are TLE-114-01-G-DV and TLE-114-01-G-DV-A electrically interchangeable?

A: Yes. Both parts share identical electrical specifications including 3.2A per contact current rating, -55°C to 125°C operating temperature range, and gold-plated mating contacts with 10.0µin thickness. They are electrically equivalent for all circuit applications.

Q: What is the difference between these two part numbers?

A: The TLE-114-01-G-DV-A includes a board guide feature and specifies gold plating on the post contact finish. The base TLE-114-01-G-DV does not specify these features. Both maintain identical mechanical pitch, row spacing, position count, and mounting technology.

Q: Can I substitute TLE-114-01-G-DV-A for TLE-114-01-G-DV in existing designs?

A: Yes. The TLE-114-01-G-DV-A is a direct mechanical and electrical substitute. The addition of the board guide feature provides enhanced alignment without affecting PCB layout or mating interface compatibility.

Q: Are both parts RoHS3 compliant?

A: Yes. Both TLE-114-01-G-DV and TLE-114-01-G-DV-A are RoHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating, suitable for standard storage and handling conditions.

Q: What is the mating pitch for these connectors?

A: Both connectors feature a 0.079" (2.00mm) mating pitch with 2-row configuration and 0.079" row spacing, establishing a 28-position dual-row contact array.

Q: Are these connectors suitable for high-current applications?

A: Both parts are rated for 3.2A per contact. Total current capacity depends on the number of loaded positions and thermal management in the application. Consult thermal analysis for multi-contact current distribution scenarios.