Request Quote
(Ships tomorrow)
TLC2264AIPWR Equivalent & Substitute Parts
Part Overview
The TLC2264AIPWR is a general-purpose operational amplifier manufactured by Texas Instruments, featuring four independent circuits in a 14-TSSOP surface-mount package. This LinCMOS™ series device operates across a wide supply voltage range of 4.4 V to 16 V with rail-to-rail output capability. The part maintains Active product status and is fully RoHS3 compliant with unlimited moisture sensitivity rating (MSL 1).
Substitute parts are identified when equivalent electrical performance and mechanical compatibility can be achieved within the specified parameter tolerances for the application category. Alternative sources and packaging options are evaluated based on matching functional specifications and compliance certifications.
Substiute Parts
Key Parameters
| Parameter | Value | Unit |
|---|---|---|
| Amplifier Type | General Purpose | — |
| Number of Circuits | 4 | — |
| Output Type | Rail-to-Rail | — |
| Slew Rate | 0.55 | V/µs |
| Gain Bandwidth Product | 730 | kHz |
| Current - Input Bias | 1 | pA |
| Voltage - Input Offset | 300 | µV |
| Current - Supply (x4 Channels) | 850 | µA |
| Current - Output / Channel | 50 | mA |
| Voltage - Supply Span (Min) | 4.4 | V |
| Voltage - Supply Span (Max) | 16 | V |
| Operating Temperature | -40 to 125 | °C |
| Package / Case | 14-TSSOP (0.173", 4.40mm Width) | — |
| Mounting Type | Surface Mount | — |
| RoHS Status | ROHS3 Compliant | — |
| MSL Rating | 1 (Unlimited) | — |
Substitute Part Grouping Explanation
Substitute parts for the TLC2264AIPWR are evaluated based on the following critical parameters that determine functional equivalence:
Primary Substitution Criteria:
- Amplifier Type: General Purpose or Voltage Feedback
- Number of Circuits: 4 independent channels
- Output Type: Rail-to-Rail capability
- Package Type: 14-TSSOP, 14-SOIC, or 14-DIP surface-mount or through-hole variants
- Operating Temperature Range: Minimum -40°C to 125°C
- Supply Voltage Compatibility: Overlap within 4.4 V to 16 V range
- RoHS3 Compliance and MSL 1 rating
Grouping Logic:
Group 1 - Direct TSSOP Equivalents (AD8040 Series): Parts AD8040ARUZ and AD8040ARUZ-REEL7 maintain identical 14-TSSOP packaging with surface-mount configuration. These devices feature higher slew rate (63 V/µs) and bandwidth (125 MHz) compared to the TLC2264AIPWR, with reduced input bias current (700 nA) and lower supply voltage minimum (2.7 V). Supply voltage maximum of 12 V is within the TLC2264AIPWR operating range.
Group 2 - Alternative Package Variants (AD8040 Series): Parts AD8040ARZ and AD8040ARZ-REEL7 provide equivalent electrical performance to Group 1 but in 14-SOIC packaging (0.154", 3.90mm Width). These are suitable for applications where SOIC footprint is acceptable.
Group 3 - Extended Temperature Range (AD8040WARUZ-REEL7): This variant maintains 14-TSSOP packaging with identical electrical specifications to Group 1, available in Tape & Reel packaging format.
Group 4 - Voltage Feedback Alternatives (AD8044 Series): Parts AD8044ANZ and AD8044ARZ-14 represent higher-performance voltage feedback amplifiers with 160 MHz bandwidth and 190 V/µs slew rate. AD8044ANZ uses 14-DIP through-hole packaging; AD8044ARZ-14 uses 14-SOIC surface-mount. Operating temperature range is -40°C to 85°C. Supply voltage range is 3 V to 12 V.
Group 5 - High-Performance TSSOP Option (AD8054ARUZ): This voltage feedback amplifier offers 160 MHz bandwidth and 190 V/µs slew rate in 14-TSSOP packaging with extended temperature range (-40°C to 125°C). Supply voltage range is 3 V to 12 V.
Group 6 - High-Performance SOIC Options (AD8054ARZ, AD8054ARZ-REEL7): These voltage feedback amplifiers provide identical electrical performance to AD8054ARUZ in 14-SOIC packaging, available in tube and cut tape formats.
Parameter Comparison
| Parameter | TLC2264AIPWR | AD8040ARUZ | AD8040ARUZ-REEL7 | AD8040ARZ | AD8040ARZ-REEL7 | AD8040WARUZ-REEL7 | AD8044ANZ | AD8044ARZ-14 | AD8054ARUZ | AD8054ARZ | AD8054ARZ-REEL7 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Manufacturer | Texas Instruments | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Amplifier Type | General Purpose | General Purpose | General Purpose | General Purpose | General Purpose | General Purpose | Voltage Feedback | Voltage Feedback | Voltage Feedback | Voltage Feedback | Voltage Feedback |
| Number of Circuits | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 |
| Output Type | Rail-to-Rail | Rail-to-Rail | Rail-to-Rail | Rail-to-Rail | Rail-to-Rail | Rail-to-Rail | Rail-to-Rail | Rail-to-Rail | Rail-to-Rail | Rail-to-Rail | Rail-to-Rail |
| Slew Rate (V/µs) | 0.55 | 63 | 63 | 63 | 63 | 63 | 190 | 190 | 190 | 190 | 190 |
| Bandwidth (MHz) | 0.73 (GBW) | 125 | 125 | 125 | 125 | 125 | 160 | 160 | 160 | 160 | 160 |
| Input Bias Current (pA/nA) | 1 pA | 700 nA | 700 nA | 700 nA | 700 nA | 700 nA | 2 µA | 2 µA | 2 µA | 2 µA | 2 µA |
| Input Offset Voltage (mV) | 0.3 | 1.6 | 1.6 | 1.6 | 1.6 | 1.6 | 1.4 | 1.4 | 1.8 | 1.8 | 1.8 |
| Supply Current (mA) | 0.85 (x4) | 1.4 (x4) | 1.4 (x4) | 1.4 (x4) | 1.4 (x4) | 1.4 (x4) | 11.5 | 11.5 | 2.875 (x4) | 2.875 (x4) | 2.875 (x4) |
| Output Current / Channel (mA) | 50 | 170 | 170 | 170 | 170 | 170 | 30 | 30 | 30 | 30 | 30 |
| Supply Voltage Min (V) | 4.4 | 2.7 | 2.7 | 2.7 | 2.7 | 2.7 | 3 | 3 | 3 | 3 | 3 |
| Supply Voltage Max (V) | 16 | 12 | 12 | 12 | 12 | 12 | 12 | 12 | 12 | 12 | 12 |
| Operating Temperature (°C) | -40 to 125 | -40 to 125 | -40 to 125 | -40 to 125 | -40 to 125 | -40 to 125 | -40 to 85 | -40 to 85 | -40 to 125 | -40 to 125 | -40 to 125 |
| Package / Case | 14-TSSOP | 14-TSSOP | 14-TSSOP | 14-SOIC | 14-SOIC | 14-TSSOP | 14-DIP | 14-SOIC | 14-TSSOP | 14-SOIC | 14-SOIC |
| Mounting Type | Surface Mount | Surface Mount | Surface Mount | Surface Mount | Surface Mount | Surface Mount | Through Hole | Surface Mount | Surface Mount | Surface Mount | Surface Mount |
| RoHS Status | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant |
| MSL Rating | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) |
| REACH Status | REACH Unaffected | REACH Unaffected | REACH Unaffected | REACH Unaffected | REACH Unaffected | REACH Unaffected | REACH Unaffected | REACH Unaffected | REACH Unaffected | REACH Unaffected | REACH Unaffected |
Engineering Selection Recommendations
For Direct TSSOP Replacement (AD8040 Series - ARUZ, ARUZ-REEL7, WARUZ-REEL7):
These parts maintain identical 14-TSSOP surface-mount packaging and extended temperature range (-40°C to 125°C) matching the TLC2264AIPWR. All variants are Active product status with ROHS3 compliance and MSL 1 rating. The AD8040 series provides higher performance specifications including 63 V/µs slew rate and 125 MHz bandwidth. Supply voltage maximum is 12 V, which is within the TLC2264AIPWR operating envelope. Selection between ARUZ (tube), ARUZ-REEL7 (cut tape), and WARUZ-REEL7 (tape & reel) depends on procurement and assembly requirements.
For SOIC Package Requirement (AD8040ARZ, AD8040ARZ-REEL7):
When 14-SOIC surface-mount packaging is required, AD8040ARZ and AD8040ARZ-REEL7 provide equivalent electrical performance to the TSSOP variants with identical temperature range and compliance certifications. Package footprint is 0.154" width (3.90mm) compared to TSSOP 0.173" width (4.40mm).
For Voltage Feedback Performance (AD8054ARUZ, AD8054ARZ, AD8054ARZ-REEL7):
When higher bandwidth (160 MHz) and slew rate (190 V/µs) are required, the AD8054 series offers voltage feedback amplifier topology. AD8054ARUZ maintains 14-TSSOP packaging with extended temperature range (-40°C to 125°C). AD8054ARZ and AD8054ARZ-REEL7 provide equivalent performance in 14-SOIC packaging. All maintain ROHS3 compliance and MSL 1 rating. Supply voltage range is 3 V to 12 V.
For Through-Hole Assembly (AD8044ANZ):
When through-hole mounting is required, AD8044ANZ provides 14-DIP packaging with voltage feedback topology, 160 MHz bandwidth, and 190 V/µs slew rate. Operating temperature range is -40°C to 85°C. This part is suitable for legacy board designs or applications requiring through-hole soldering.
For Surface-Mount SOIC Voltage Feedback (AD8044ARZ-14):
AD8044ARZ-14 provides voltage feedback amplifier in 14-SOIC surface-mount package with 160 MHz bandwidth and 190 V/µs slew rate. Operating temperature range is -40°C to 85°C. This part is suitable when SOIC footprint and higher performance are required but extended temperature range beyond 85°C is not necessary.
All substitute parts maintain Active product status, ROHS3 compliance, and MSL 1 (Unlimited) moisture sensitivity rating, ensuring compatibility with current manufacturing and environmental standards.
Frequently Asked Questions (FAQ)
Q1: Can AD8040ARUZ directly replace TLC2264AIPWR in the same PCB footprint?
A: Yes. Both parts use 14-TSSOP surface-mount packaging with identical pin count and footprint dimensions (0.173", 4.40mm Width). PCB layout and assembly process remain unchanged. Electrical performance of AD8040ARUZ exceeds TLC2264AIPWR specifications with higher slew rate (63 V/µs vs. 0.55 V/µs) and bandwidth (125 MHz vs. 0.73 MHz GBW).
Q2: What is the key difference between AD8040 and AD8054 series?
A: AD8040 series uses general-purpose amplifier topology with 63 V/µs slew rate and 125 MHz bandwidth. AD8054 series uses voltage feedback amplifier topology with 190 V/µs slew rate and 160 MHz bandwidth. Both maintain 4-circuit configuration and rail-to-rail output. Selection depends on application bandwidth and slew rate requirements.
Q3: Why does AD8040ARUZ have lower supply voltage maximum (12 V) than TLC2264AIPWR (16 V)?
A: AD8040ARUZ is specified for 2.7 V to 12 V supply range. Applications requiring 16 V operation must verify that 12 V maximum rating is acceptable for the circuit design. If 16 V supply is mandatory, TLC2264AIPWR remains the only option among these substitutes.
Q4: Are all substitute parts RoHS3 compliant?
A: Yes. All listed substitute parts (AD8040 series, AD8044 series, AD8054 series) are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating, matching TLC2264AIPWR compliance status.
Q5: What packaging options are available for the AD8054 series?
A: AD8054ARUZ is available in 14-TSSOP surface-mount package. AD8054ARZ and AD8054ARZ-REEL7 are available in 14-SOIC surface-mount package. All three variants provide identical electrical performance with extended temperature range (-40°C to 125°C).
Q6: Can AD8044ANZ be used as a direct replacement for TLC2264AIPWR?
A: No. AD8044ANZ uses 14-DIP through-hole packaging, which is not compatible with surface-mount PCB layouts designed for TLC2264AIPWR (14-TSSOP). AD8044ANZ is suitable only for through-hole assembly designs. For surface-mount compatibility, use AD8044ARZ-14 (14-SOIC) or AD8054 series (14-TSSOP or 14-SOIC).
Q7: What is the difference between AD8040ARUZ-REEL7 and AD8040WARUZ-REEL7?
A: Both parts use identical 14-TSSOP packaging and electrical specifications. The primary difference is packaging format: AD8040ARUZ-REEL7 is supplied in cut tape (CT) & Digi-Reel® format, while AD8040WARUZ-REEL7 is supplied in tape & reel (TR) format. Selection depends on assembly equipment compatibility and procurement preferences.
Q8: Does input bias current difference affect circuit design?
A: TLC2264AIPWR has 1 pA input bias current, while AD8040 series has 700 nA and AD8054/AD8044 series have 2 µA. For high-impedance input circuits, the lower input bias current of TLC2264AIPWR may be advantageous. For most general-purpose applications, the higher input bias current of substitutes is acceptable. Circuit simulation or testing is necessary to confirm compatibility for specific high-impedance designs.
Q9: What is the operating temperature range limitation for AD8044 series?
A: AD8044ANZ and AD8044ARZ-14 are specified for -40°C to 85°C operating temperature, which is narrower than TLC2264AIPWR (-40°C to 125°C). Applications requiring operation above 85°C must use TLC2264AIPWR, AD8040 series, or AD8054 series, which all support -40°C to 125°C range.
Q10: Are there inventory considerations when selecting substitutes?
A: Yes. Inventory levels vary by part number and packaging format. AD8054ARZ-REEL7 has highest inventory (27,722 pcs), while AD8044ARZ-14 has lower inventory (1,593 pcs). For high-volume production, verify substitute part availability before design commitment.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts