TLC2262CPW Equivalent & Substitute Parts

Part Overview

The TLC2262CPW is a CMOS dual-channel operational amplifier manufactured by Texas Instruments, designed for rail-to-rail signal processing applications. This device features low input bias current, minimal input offset voltage, and operates across a wide supply voltage range of 4.4V to 16V. The TLC2262CPW is classified as Last Time Buy, indicating discontinued production with limited inventory availability. Identifying equivalent substitute parts is essential for design continuity, long-term project support, and ensuring uninterrupted supply chain access for new production runs or design revisions.

Substiute Parts

TLC2262CPW

Texas InstrumentsIn Stock: 2255TLC2262CPW Datasheet

Current PartRFQ

TLC2262CPWR

Texas InstrumentsIn Stock: 15782TLC2262CPWR Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TLC2262CPW is determined by strict equivalence across all electrical and mechanical parameters. The primary substitute identified is the TLC2262CPWR, which maintains identical specifications across all critical performance characteristics:

Key Parameters Determining Substitutability:

• Amplifier topology (CMOS dual-channel)
• Output configuration (Rail-to-Rail)
• Electrical performance metrics (Slew Rate, Gain Bandwidth Product, Input Bias Current, Input Offset Voltage, Supply Current, Output Current)
• Supply voltage operating range (4.4V to 16V minimum and maximum)
• Operating temperature range (0°C to 70°C)
• Physical package specification (8-TSSOP with identical dimensions)
• Surface mount mounting type
• Regulatory compliance (RoHS3, REACH Unaffected)

The TLC2262CPWR differs from the TLC2262CPW only in packaging format and product status, not in electrical performance or functional capability.

Parameter Comparison

Engineering Selection Recommendations

The TLC2262CPWR is the direct functional equivalent of the TLC2262CPW and is suitable for substitution in all applications where the TLC2262CPW was originally specified. Selection between these parts should be based on the following criteria:

For New Designs and Production Continuity: The TLC2262CPWR is the recommended choice. This part maintains Active product status with Texas Instruments, ensuring long-term availability and continued manufacturing support. The higher inventory level (15,698 pieces) compared to the TLC2262CPW (2,200 pieces) provides greater supply chain security for ongoing production requirements.

For Existing Inventory Management: The TLC2262CPW may be used to deplete existing stock in applications where immediate substitution is not required. However, given its Last Time Buy status, transition planning to the TLC2262CPWR should be initiated to prevent supply disruptions.

Packaging Considerations: The TLC2262CPW is supplied in Tube packaging, while the TLC2262CPWR is available in Cut Tape (CT) and Digi-Reel® formats. Selection should align with assembly line requirements and handling procedures. Both packaging formats contain identical die and electrical performance.

Compliance and Regulatory: Both parts are ROHS3 Compliant, REACH Unaffected, and carry identical regulatory classifications (ECCN: EAR99, HTSUS: 8542.33.0001), ensuring no compliance barriers to substitution.

Frequently Asked Questions (FAQ)

Q: Can the TLC2262CPWR be used as a direct replacement for the TLC2262CPW in existing designs?

A: Yes. The TLC2262CPWR is electrically and mechanically identical to the TLC2262CPW. All electrical parameters, operating ranges, and package dimensions are equivalent. The parts are pin-compatible and functionally interchangeable without circuit modification.

Q: What is the difference between Tube and Cut Tape packaging?

A: Tube packaging contains components in a plastic tube for manual handling and small-quantity applications. Cut Tape (CT) and Digi-Reel® packaging are automated assembly formats suitable for high-volume production. The internal component specifications and performance are identical; packaging format selection depends on assembly process requirements.

Q: Why is the TLC2262CPW marked as Last Time Buy?

A: Last Time Buy status indicates that Texas Instruments has discontinued production of this part number. Existing inventory will be depleted without replenishment. The TLC2262CPWR remains in Active production status and is the recommended long-term alternative.

Q: Are there any electrical performance differences between these parts?

A: No. Both the TLC2262CPW and TLC2262CPWR share identical electrical specifications, including Slew Rate (0.55V/µs), Gain Bandwidth Product (730 kHz), Input Bias Current (1 pA), Input Offset Voltage (300 µV), and all supply and output current ratings.

Q: What is the impact of Moisture Sensitivity Level 1 on handling?

A: Moisture Sensitivity Level 1 (Unlimited) indicates no moisture sensitivity restrictions. These parts do not require special dry-pack storage, desiccant handling, or bake-out procedures prior to assembly. Standard component handling practices are sufficient.

Q: Can I mix TLC2262CPW and TLC2262CPWR in the same production batch?

A: Yes. Since both parts are electrically and mechanically identical, they can be used interchangeably within the same assembly. However, for traceability and inventory management, it is recommended to maintain separate tracking of part numbers and packaging formats.

Q: What supply voltage range is supported by both parts?

A: Both the TLC2262CPW and TLC2262CPWR operate across a supply voltage range of 4.4V (minimum) to 16V (maximum), supporting single or dual supply configurations within this span.