TLC2262AIPW Equivalent & Substitute Parts

Part Overview

The TLC2262AIPW is a CMOS dual-channel operational amplifier manufactured by Texas Instruments, designed for rail-to-rail signal processing applications. This device integrates two independent amplifier circuits in an 8-TSSOP surface mount package and operates across a wide supply voltage range of 4.4V to 16V with low input bias current characteristics.

The TLC2262AIPW carries an Obsolete product status, indicating that Texas Instruments has discontinued active production and support for this specific part number. Organizations currently using this component in production or maintenance applications require identification of functionally equivalent alternatives to ensure supply chain continuity and long-term design sustainability.

Substiute Parts

TLC2262AIPW

Texas InstrumentsIn Stock: 1680TLC2262AIPW Datasheet

Current PartRFQ

TLC2262AIPWR

Texas InstrumentsIn Stock: 30492TLC2262AIPWR Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TLC2262AIPW is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Criteria:

• Amplifier topology: CMOS architecture
• Circuit count: Dual-channel (2 circuits)
• Output configuration: Rail-to-rail capability
• Slew rate: 0.55 V/µs
• Gain bandwidth product: 730 kHz
• Input bias current: 1 pA
• Input offset voltage: 300 µV
• Supply current per channel: 425 µA
• Output current capability: 50 mA per channel
• Supply voltage range: 4.4V to 16V minimum and maximum
• Temperature operating range: -40°C to 125°C

Mechanical Equivalence Criteria:

• Package type: 8-TSSOP surface mount
• Package dimensions: 0.173" width, 4.40mm width specification
• Mounting technology: Surface mount compatible with standard PCB assembly processes

Compliance Equivalence Criteria:

• RoHS3 compliance status
• Moisture sensitivity level MSL 1
• REACH unaffected status

The substitute part TLC2262AIPWR maintains identical electrical and mechanical specifications while differing only in packaging format (Cut Tape and Digi-Reel distribution) and product status (Active versus Obsolete).

Parameter Comparison

Engineering Selection Recommendations

The TLC2262AIPWR is the direct functional equivalent and recommended substitute for the obsolete TLC2262AIPW. Both parts share identical electrical specifications, mechanical package dimensions, and compliance certifications.

Selection Basis:

The TLC2262AIPWR carries Active product status from Texas Instruments, ensuring continued availability, technical support, and manufacturing consistency. This status provides supply chain reliability for new designs and ongoing production requirements.

Both parts maintain ROHS3 compliance and REACH unaffected status, satisfying regulatory requirements for industrial and commercial applications. The MSL 1 moisture sensitivity rating indicates no special storage or handling precautions are required.

The only substantive difference between these parts is packaging format: the TLC2262AIPW is supplied in Tube packaging, while the TLC2262AIPWR is available in Cut Tape and Digi-Reel formats. This distinction affects procurement logistics and automated assembly compatibility but does not alter electrical or mechanical performance.

For applications currently using TLC2262AIPW components, direct substitution with TLC2262AIPWR is electrically and mechanically valid. PCB footprints, schematic symbols, and circuit designs require no modification.

Frequently Asked Questions (FAQ)

Q: Can TLC2262AIPWR be used as a direct replacement for TLC2262AIPW in existing designs?

A: Yes. The TLC2262AIPWR is electrically and mechanically identical to the TLC2262AIPW. All electrical parameters, package dimensions, and pin configurations are equivalent. No circuit modifications or PCB redesign is required.

Q: What is the difference between Tube and Cut Tape packaging formats?

A: Tube packaging supplies components in plastic tubes for manual handling and small-quantity applications. Cut Tape and Digi-Reel packaging formats are optimized for automated pick-and-place assembly equipment used in high-volume manufacturing. The internal component specifications remain identical.

Q: Why is the TLC2262AIPW marked as Obsolete?

A: Obsolete status indicates that Texas Instruments has discontinued active production of this specific part number. The TLC2262AIPWR, carrying Active status, represents the current manufacturing equivalent and is the recommended source for new procurement.

Q: Are there any compliance or regulatory differences between these parts?

A: No. Both parts maintain identical RoHS3 compliance, REACH unaffected status, and MSL 1 moisture sensitivity ratings. Regulatory and environmental compliance requirements are satisfied by either part.

Q: What is the pin configuration compatibility between TLC2262AIPW and TLC2262AIPWR?

A: Both parts use the 8-TSSOP package with identical pin assignments. Pin-for-pin compatibility is complete, allowing direct PCB footprint reuse without modification.

Q: Can I mix TLC2262AIPW and TLC2262AIPWR components in the same production batch?

A: Yes. Since both parts are electrically and mechanically identical, they can be used interchangeably within the same assembly or production run. However, sourcing from a single part number is recommended for supply chain consistency and traceability.

Q: What supply voltage range is supported by both parts?

A: Both TLC2262AIPW and TLC2262AIPWR operate across a supply voltage range of 4.4V minimum to 16V maximum, supporting single-supply and dual-supply configurations within this specification.

Q: Are there any temperature derating considerations for these parts?

A: Both parts maintain full electrical specifications across the operating temperature range of -40°C to 125°C. No derating is required within this range.