TLC2202ACDRG4 Equivalent & Substitute Parts

Part Overview

The TLC2202ACDRG4 is a CMOS dual-channel operational amplifier manufactured by Texas Instruments, designed for rail-to-rail output applications in the LinCMOS™ series. This device integrates two independent amplifier circuits in a 14-SOIC surface mount package and operates across a wide supply voltage range of 4.6V to 16V.

The TLC2202ACDRG4 carries an Obsolete product status. Identifying equivalent substitute parts is necessary to ensure design continuity, maintain supply chain reliability, and support ongoing production requirements for applications currently utilizing this component.

Substiute Parts

TLC2202ACDRG4

Texas InstrumentsIn Stock: 967TLC2202ACDRG4 Datasheet

Current PartRFQ

TLC2202ACDR

Texas InstrumentsIn Stock: 6018TLC2202ACDR Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TLC2202ACDRG4 is determined by strict equivalence across all electrical and mechanical parameters. The primary substitute identified is the TLC2202ACDR, which maintains identical specifications across all critical performance characteristics.

The substitution logic is based on the following key parameters:

• Amplifier Architecture: CMOS dual-channel configuration
• Output Characteristics: Rail-to-rail output capability
• Dynamic Performance: Slew rate of 2.7V/µs and gain bandwidth product of 1.9 MHz
• Input Characteristics: Input bias current of 1 pA and input offset voltage of 80 µV
• Power Supply Requirements: Operating range from 4.6V to 16V
• Package Specification: 14-SOIC surface mount package with 0.154" width (3.90mm)
• Thermal Operating Range: 0°C to 70°C
• Regulatory Compliance: ROHS3 compliance and MSL Level 1

The TLC2202ACDR differs from the TLC2202ACDRG4 only in packaging format (Tape & Reel versus tube packaging) and product status (Active versus Obsolete). All electrical and mechanical specifications remain identical.

Parameter Comparison

Engineering Selection Recommendations

The TLC2202ACDR is the direct substitute for the TLC2202ACDRG4. Both parts are manufactured by Texas Instruments and maintain identical electrical and mechanical specifications across all performance parameters.

The primary distinction between these parts is product status and packaging format. The TLC2202ACDRG4 is classified as Obsolete, while the TLC2202ACDR maintains Active status. This status difference reflects current manufacturing availability and long-term supply chain viability.

Both parts carry ROHS3 compliance certification and REACH Unaffected status, meeting current regulatory requirements for electronic component manufacturing and distribution. The Moisture Sensitivity Level of 1 (Unlimited) indicates no moisture-related handling restrictions during storage or assembly.

For new designs or ongoing production requiring this amplifier topology, the TLC2202ACDR is the appropriate selection due to its Active product status and assured supply chain continuity. For existing designs currently using the TLC2202ACDRG4, direct substitution with the TLC2202ACDR is electrically and mechanically valid without circuit modification.

Frequently Asked Questions (FAQ)

Q: Can the TLC2202ACDR be used as a direct replacement for the TLC2202ACDRG4 in existing circuit designs?

A: Yes. The TLC2202ACDR is electrically and mechanically equivalent to the TLC2202ACDRG4. All performance parameters, supply voltage requirements, output characteristics, and package specifications are identical. No circuit modifications are required for substitution.

Q: What is the difference between the TLC2202ACDRG4 and TLC2202ACDR?

A: The two parts differ only in packaging format and product status. The TLC2202ACDRG4 is supplied in tube packaging with Obsolete status. The TLC2202ACDR is supplied in Tape & Reel format with Active product status. All electrical specifications and the 14-SOIC package footprint are identical.

Q: Why is the TLC2202ACDRG4 classified as Obsolete?

A: Obsolete status indicates that the manufacturer has discontinued active production and support for this specific part number variant. The TLC2202ACDR remains in active production as the current equivalent offering.

Q: Are there any thermal or environmental operating differences between these parts?

A: No. Both parts operate across the identical temperature range of 0°C to 70°C and maintain the same supply voltage specifications (4.6V to 16V). Environmental compliance certifications, including ROHS3 and REACH status, are identical.

Q: What packaging considerations should be addressed when transitioning from TLC2202ACDRG4 to TLC2202ACDR?

A: The primary consideration is packaging format. The TLC2202ACDRG4 is supplied in tube packaging, while the TLC2202ACDR is supplied in Tape & Reel format. This affects receiving, storage, and assembly line handling procedures but does not impact the component's electrical performance or PCB footprint compatibility.

Q: Are both parts suitable for high-volume production?

A: The TLC2202ACDR is the appropriate choice for high-volume production due to its Active status and Tape & Reel packaging format, which is optimized for automated assembly processes. The TLC2202ACDRG4, being Obsolete, is not recommended for new production commitments.