TLC2201CDR Equivalent & Substitute Parts

Part Overview

The TLC2201CDR is a general purpose operational amplifier manufactured by Texas Instruments, housed in an 8-SOIC surface mount package. This LinCMOS™ series device features rail-to-rail output capability and is designed for applications requiring low input bias current and low input offset voltage. The part is currently in active production status with RoHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified when the original TLC2201CDR becomes unavailable, when alternative packaging formats are required, or when design specifications permit operation within the electrical parameter ranges of qualified alternatives.

Substiute Parts

TLC2201CDR

Texas InstrumentsIn Stock: 2069TLC2201CDR Datasheet

Current PartRFQ

MCP6H01-E/SN

Microchip TechnologyIn Stock: 3000161MCP6H01-E/SN Datasheet

MFR RecommendedRFQ

MCP6H01T-E/SN

Microchip TechnologyIn Stock: 16467MCP6H01T-E/SN Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TLC2201CDR are qualified based on the following electrical and mechanical criteria:

Mechanical Compatibility:

• Identical package type: 8-SOIC (0.154", 3.90mm Width)
• Surface mount mounting type
• Pin-compatible footprint

Electrical Compatibility:

• General purpose amplifier classification
• Single circuit configuration
• Rail-to-rail output capability
• Supply voltage range overlap: minimum 3.5 V to 4.6 V and maximum 16 V
• Operating temperature range that encompasses or extends the original specification

Compliance Requirements:

• RoHS3 compliance
• Moisture sensitivity level 1 (Unlimited)
• Active product status

The MCP6H01-E/SN and MCP6H01T-E/SN from Microchip Technology meet all mechanical and electrical substitution criteria. Both variants share identical electrical specifications and differ only in packaging format (Tube versus Tape & Reel).

Parameter Comparison

Engineering Selection Recommendations

TLC2201CDR (Original Part)

Select the TLC2201CDR when the design requires the specific electrical performance characteristics of the Texas Instruments LinCMOS™ series, including higher slew rate (2.7 V/µs) and gain bandwidth product (1.9 MHz). This part is suitable for applications operating within the 0°C to 70°C temperature range and requiring the specified input bias current and offset voltage performance. The part maintains active production status with full RoHS3 compliance.

MCP6H01T-E/SN (Preferred Substitute - Tape & Reel Packaging)

The MCP6H01T-E/SN is the primary substitute when the TLC2201CDR is unavailable. This part is supplied in Tape & Reel packaging, matching the original packaging format. It provides identical mechanical compatibility and meets all compliance requirements. The extended operating temperature range (-40°C to 125°C) accommodates broader environmental specifications. The lower supply current (0.135 mA versus 1.1 mA) offers improved power efficiency. Applications must accommodate the reduced slew rate (0.8 V/µs) and gain bandwidth product (1.2 MHz) compared to the original part.

MCP6H01-E/SN (Alternative Substitute - Tube Packaging)

The MCP6H01-E/SN is functionally identical to the MCP6H01T-E/SN but supplied in Tube packaging. Select this variant when Tube packaging is acceptable for the assembly process or when Tape & Reel format is unavailable. All electrical specifications and compliance certifications are identical to the MCP6H01T-E/SN.

Frequently Asked Questions (FAQ)

Q: Can the MCP6H01-E/SN or MCP6H01T-E/SN be used as direct replacements for the TLC2201CDR?

A: Yes, both MCP6H01 variants are mechanically and electrically compatible substitutes. They share the same 8-SOIC package footprint, pin configuration, and rail-to-rail output capability. Both are RoHS3 compliant with unlimited moisture sensitivity rating. The primary differences are in electrical performance parameters (slew rate, gain bandwidth product, input bias current, and input offset voltage) and operating temperature range.

Q: What are the key electrical differences between the TLC2201CDR and MCP6H01 variants?

A: The TLC2201CDR offers higher slew rate (2.7 V/µs versus 0.8 V/µs) and higher gain bandwidth product (1.9 MHz versus 1.2 MHz). The TLC2201CDR has lower input bias current (1 pA versus 10 pA) and lower input offset voltage (100 µV versus 700 µV). The MCP6H01 variants consume significantly less supply current (0.135 mA versus 1.1 mA). The MCP6H01 variants support a lower minimum supply voltage (3.5 V versus 4.6 V) and an extended operating temperature range (-40°C to 125°C versus 0°C to 70°C).

Q: What is the difference between MCP6H01-E/SN and MCP6H01T-E/SN?

A: Both parts are electrically identical. The difference is packaging format only. The MCP6H01-E/SN is supplied in Tube packaging, while the MCP6H01T-E/SN is supplied in Tape & Reel (TR) packaging. Select based on assembly line requirements and inventory management practices.

Q: Are there any supply voltage compatibility concerns when substituting?

A: The MCP6H01 variants support a lower minimum supply voltage (3.5 V) compared to the TLC2201CDR (4.6 V minimum). Both support the same maximum supply voltage (16 V). If the design operates at supply voltages between 3.5 V and 4.6 V, the MCP6H01 variants will function while the TLC2201CDR will not. For designs operating above 4.6 V, both parts are compatible.

Q: Are there temperature range considerations for substitution?

A: The TLC2201CDR operates from 0°C to 70°C. The MCP6H01 variants operate from -40°C to 125°C. If the application requires operation below 0°C or above 70°C, only the MCP6H01 variants are suitable. For applications within the 0°C to 70°C range, both parts are compatible.

Q: Do the substitute parts meet the same compliance standards?

A: Yes. Both the MCP6H01-E/SN and MCP6H01T-E/SN are RoHS3 compliant, REACH unaffected, and carry moisture sensitivity level 1 (Unlimited), matching the TLC2201CDR exactly.