TLC2201AIDR Equivalent & Substitute Parts

Part Overview

The TLC2201AIDR is a general-purpose operational amplifier manufactured by Texas Instruments, housed in an 8-SOIC surface mount package. This LinCMOS™ series device features rail-to-rail output capability and is designed for applications requiring low input bias current and low input offset voltage. The part is currently in active production status with RoHS3 compliance and unlimited moisture sensitivity level rating. Substitute parts are identified when equivalent functional performance can be achieved within the specified electrical and mechanical parameters of this product category.

Substiute Parts

TLC2201AIDR

Texas InstrumentsIn Stock: 5000435TLC2201AIDR Datasheet

Current PartRFQ

MCP6H01-E/SN

Microchip TechnologyIn Stock: 3000161MCP6H01-E/SN Datasheet

MFR RecommendedRFQ

MCP6H01T-E/SN

Microchip TechnologyIn Stock: 16467MCP6H01T-E/SN Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TLC2201AIDR are identified based on strict equivalence in the following critical parameters:

Mechanical Compatibility:

• Package type: 8-SOIC (0.154", 3.90mm Width)
• Mounting type: Surface Mount
• Pin count and footprint: 8-pin SOIC

Functional Equivalence:

• Amplifier type: General Purpose
• Number of circuits: 1
• Output type: Rail-to-Rail
• Supply voltage range compatibility: Minimum 4.6V to maximum 16V

Regulatory & Compliance:

• RoHS3 compliance
• Moisture sensitivity level: 1 (Unlimited)
• Active product status

The substitute parts MCP6H01-E/SN and MCP6H01T-E/SN (Microchip Technology) meet all mechanical and functional equivalence criteria. Both parts are manufactured in the same 8-SOIC package, support rail-to-rail output operation, and maintain RoHS3 compliance with identical moisture sensitivity ratings. The primary distinction between these substitutes is packaging format: MCP6H01-E/SN is supplied in tube packaging, while MCP6H01T-E/SN is supplied in tape and reel format.

Parameter Comparison

Engineering Selection Recommendations

Both MCP6H01-E/SN and MCP6H01T-E/SN are active production parts with full RoHS3 compliance and REACH unaffected status, meeting all regulatory requirements equivalent to the TLC2201AIDR. Selection between these substitute parts should be based on procurement and assembly requirements:

MCP6H01-E/SN (Tube Packaging): Suitable for lower-volume applications, prototype development, and manual assembly processes where tube packaging is preferred for component handling and storage.

MCP6H01T-E/SN (Tape & Reel Packaging): Appropriate for high-volume production environments utilizing automated pick-and-place assembly equipment. Tape and reel format provides optimized handling for surface mount technology (SMT) manufacturing lines.

Both substitute parts operate within the maximum supply voltage specification of 16V. The MCP6H01 series devices support a lower minimum supply voltage (3.5V) compared to the TLC2201AIDR (4.6V minimum), providing additional design flexibility in low-voltage applications. Operating temperature range extends to 125°C for both Microchip substitutes, exceeding the TLC2201AIDR specification of 85°C maximum.

Frequently Asked Questions (FAQ)

Q: Can MCP6H01-E/SN and MCP6H01T-E/SN be used interchangeably with TLC2201AIDR in existing designs?

A: Yes, both Microchip parts are mechanically and functionally equivalent substitutes. They share identical 8-SOIC package dimensions, pin configuration, and rail-to-rail output capability. The primary difference is packaging format (tube versus tape & reel), which does not affect electrical performance or PCB assembly compatibility.

Q: What is the difference between MCP6H01-E/SN and MCP6H01T-E/SN?

A: Both parts are electrically identical. The distinction is packaging format: MCP6H01-E/SN is supplied in tube packaging for manual handling, while MCP6H01T-E/SN is supplied in tape and reel format optimized for automated SMT assembly lines. Selection depends on manufacturing process requirements.

Q: Are there electrical performance differences between the TLC2201AIDR and MCP6H01 substitutes?

A: Yes. The TLC2201AIDR exhibits superior slew rate (2.7 V/µs versus 0.8 V/µs), higher gain bandwidth product (1.9 MHz versus 1.2 MHz), lower input bias current (1 pA versus 10 pA), and lower input offset voltage (80 µV versus 700 µV). However, the MCP6H01 series offers significantly lower supply current (135 µA versus 1.1 mA), making it advantageous for power-constrained applications. Application-specific performance requirements must be evaluated before substitution.

Q: What is the minimum supply voltage for each part?

A: TLC2201AIDR requires minimum 4.6V supply voltage. Both MCP6H01-E/SN and MCP6H01T-E/SN operate at minimum 3.5V supply voltage, providing 1.1V additional headroom for low-voltage circuit designs.

Q: Are all three parts RoHS3 compliant?

A: Yes. TLC2201AIDR, MCP6H01-E/SN, and MCP6H01T-E/SN are all RoHS3 compliant with moisture sensitivity level 1 (unlimited). All parts are REACH unaffected and classified under ECCN EAR99 with identical HTSUS code 8542.33.0001.

Q: Which substitute part should be selected for high-volume manufacturing?

A: MCP6H01T-E/SN (tape and reel format) is recommended for high-volume production environments utilizing automated SMT assembly equipment. This packaging format optimizes component feeding, placement accuracy, and manufacturing throughput.

Q: Can the MCP6H01 series handle the same output current as the TLC2201AIDR?

A: The TLC2201AIDR specifies 50 mA output current per channel. Output current specifications for MCP6H01-E/SN and MCP6H01T-E/SN are not provided in the available technical parameters. Application designs requiring specific output current capability must reference complete manufacturer datasheets for detailed electrical specifications.