TLC070AIPG4 Equivalent & Substitute Parts

Part Overview

The TLC070AIPG4 is a general-purpose operational amplifier manufactured by Texas Instruments, housed in an 8-DIP through-hole package. This device is designed for linear amplification applications requiring low input bias current and moderate bandwidth performance. The TLC070AIPG4 is currently discontinued at DiGi Electronics, necessitating identification of functionally equivalent alternatives for ongoing design support and procurement.

Substiute Parts

TLC070AIPG4

Texas InstrumentsIn Stock: 1137TLC070AIPG4 Datasheet

Current PartRFQ

TLC070AIP

Texas InstrumentsIn Stock: 1259TLC070AIP Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TLC070AIPG4 is determined by strict equivalence across the following critical parameters:

Electrical Performance Criteria:

• Amplifier Type: General Purpose
• Number of Circuits: 1
• Slew Rate: 19 V/µs
• Gain Bandwidth Product: 10 MHz
• Current - Input Bias: 1.5 pA
• Voltage - Input Offset: 390 µV
• Current - Supply: 2.1 mA
• Current - Output / Channel: 57 mA
• Voltage - Supply Span: 4.5 V to 16 V
• Operating Temperature Range: -40°C to 125°C

Mechanical & Packaging Criteria:

• Package / Case: 8-DIP (0.300", 7.62mm)
• Mounting Type: Through Hole
• Supplier Device Package: 8-PDIP

Compliance Criteria:

• RoHS Status: ROHS3 Compliant
• REACH Status: REACH Unaffected

The TLC070AIP meets all electrical, mechanical, and compliance requirements for direct substitution with the TLC070AIPG4.

Parameter Comparison

Engineering Selection Recommendations

The TLC070AIP is the direct functional equivalent of the TLC070AIPG4. Both devices share identical electrical specifications, mechanical packaging, and regulatory compliance status. The primary distinction is product availability: the TLC070AIPG4 is discontinued, while the TLC070AIP maintains Last Time Buy status with 1152 units in stock.

For applications currently using the TLC070AIPG4, the TLC070AIP provides full electrical and mechanical compatibility without circuit redesign. Both parts are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.

The difference in packaging designation (TLC070AIPG4 supplied in standard packaging versus TLC070AIP supplied in tube packaging) does not affect electrical performance or functional compatibility in circuit applications.

Frequently Asked Questions (FAQ)

Q: Can the TLC070AIP directly replace the TLC070AIPG4 in existing designs?

A: Yes. The TLC070AIP is electrically and mechanically identical to the TLC070AIPG4. All electrical parameters, supply voltage ranges, operating temperature specifications, and pin configurations are equivalent. No circuit modifications are required.

Q: What is the difference between TLC070AIPG4 and TLC070AIP?

A: The primary difference is packaging format. The TLC070AIPG4 uses standard packaging, while the TLC070AIP is supplied in tube packaging. Electrically and functionally, both parts are identical. The TLC070AIP is currently available with Last Time Buy status.

Q: Are both parts RoHS and REACH compliant?

A: Yes. Both the TLC070AIPG4 and TLC070AIP are ROHS3 compliant and REACH unaffected, meeting current environmental regulations for electronic components.

Q: What is the 8-DIP package specification?

A: The 8-DIP package is a through-hole dual inline package measuring 0.300 inches (7.62 mm) in width. This standard package format is compatible with conventional PCB through-hole assembly processes and breadboard prototyping.

Q: Why is the TLC070AIPG4 discontinued?

A: The TLC070AIPG4 has been discontinued at DiGi Electronics. The TLC070AIP remains available as the current equivalent part number for procurement and new designs.