TL8012-S1024SM Equivalent & Substitute Parts

Part Overview

The TL8012-S1024SM is an interlock solenoid release manufactured by Omron Automation and Safety, classified as a 5PST switch with dual voltage supply capability (24VAC/DC). This component is designated as obsolete, making identification of functionally equivalent alternatives essential for system maintenance and component procurement. The part features a holding force of 204kgf, panel disconnect actuator type, and IP67 ingress protection suitable for industrial control applications.

Substiute Parts

TL8012-S1024SM

Omron Automation and SafetyIn Stock: 1100TL8012-S1024SM Datasheet

Current PartRFQ

D4JL-2NFA-D5

Omron Automation and SafetyIn Stock: 703D4JL-2NFA-D5 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The D4JL-2NFA-D5 is identified as a substitute for the TL8012-S1024SM based on the following allowable parameters:

Both components share the following critical attributes:

• Manufacturer: Omron Automation and Safety
• Component Type: Solenoid Release with Panel Disconnect actuator
• Termination Style: Screw Terminal
• Ingress Protection: IP67 (Dust Tight, Waterproof)
• Supply Voltage: 24VDC (compatible with TL8012-S1024SM supply voltage)
• Actuator Type: Panel Disconnect

The D4JL-2NFA-D5 represents an active product status alternative, providing continued availability for applications requiring interlock solenoid release functionality in industrial control systems.

Parameter Comparison

Engineering Selection Recommendations

The D4JL-2NFA-D5 is available as an active product with expanded regulatory compliance (CCC, CE, cULus, TUV certifications) compared to the obsolete TL8012-S1024SM (CE, cULus). The D4JL-2NFA-D5 meets ROHS3 compliance requirements, whereas the TL8012-S1024SM is not applicable for RoHS classification.

Selection of the D4JL-2NFA-D5 requires verification that the application tolerates the following parameter differences: reduced AC current rating (3A versus 5A), reduced DC current rating (270mA versus 2A), different circuit configuration (3PST-2NC/1NO x 2 versus 5PST-3NC/2NO), different conduit thread size (G1/2 x2 versus M20 x3), and narrower operating temperature range (-10°C ~ 55°C versus -20°C ~ 60°C).

Frequently Asked Questions (FAQ)

Q: Can the D4JL-2NFA-D5 directly replace the TL8012-S1024SM in all applications?

A: Direct replacement requires verification of circuit configuration compatibility, current rating requirements, and mechanical mounting specifications. The D4JL-2NFA-D5 features different switch contact configuration (3PST-2NC/1NO x 2 versus 5PST-3NC/2NO) and reduced current ratings. Conduit thread size differs (G1/2 x2 versus M20 x3), requiring mechanical adaptation.

Q: What are the key electrical differences between these components?

A: The TL8012-S1024SM supports 5A AC and 2A DC current ratings with 100VAC/24VDC voltage rating. The D4JL-2NFA-D5 supports 3A AC and 270mA DC current ratings with 240VAC/250VDC voltage rating. Both accept 24VDC supply voltage.

Q: Are there temperature range considerations for substitution?

A: The TL8012-S1024SM operates across -20°C ~ 60°C, while the D4JL-2NFA-D5 operates across -10°C ~ 55°C. Applications requiring operation below -10°C or above 55°C may not be compatible with the D4JL-2NFA-D5.

Q: What packaging options are available?

A: The TL8012-S1024SM is supplied in standard packaging. The D4JL-2NFA-D5 is supplied in bulk packaging.

Q: Are both components compliant with current regulatory standards?

A: The D4JL-2NFA-D5 holds active product status with ROHS3 compliance and expanded certifications (CCC, CE, cULus, TUV). The TL8012-S1024SM is obsolete with CE and cULus certifications only.