TL7726IPG4 Equivalent & Substitute Parts

Part Overview

The TL7726IPG4 is a Transient Voltage Suppressors (TVS) device with mixed technology, rated for -200/+205V clamping voltage. This component is designed for circuit protection applications requiring general-purpose transient suppression in through-hole mounting configurations. The TL7726IPG4 is discontinued at DiGi Electronics, necessitating identification of functionally equivalent alternatives to maintain design continuity and procurement availability.

Substiute Parts

TL7726IPG4

Texas InstrumentsIn Stock: 1165TL7726IPG4 Datasheet

Current PartRFQ

TL7726IP

Texas InstrumentsIn Stock: 1438TL7726IP Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TL7726IPG4 is determined by the following critical parameters:

• Voltage - Clamping: -200/+205V (exact match required)
• Technology: Mixed Technology (exact match required)
• Number of Circuits: 6 (exact match required)
• Package / Case: 8-DIP (0.300", 7.62mm) (exact match required)
• Mounting Type: Through Hole (exact match required)

The TL7726IP qualifies as a direct substitute based on identical electrical specifications and mechanical compatibility. The primary distinction is product status and packaging format, with TL7726IP currently active in inventory and available in tube packaging.

Parameter Comparison

Engineering Selection Recommendations

The TL7726IP is the manufacturer-recommended substitute for the discontinued TL7726IPG4. Both components maintain identical electrical and mechanical specifications, ensuring direct functional equivalence. The TL7726IP is currently active in production with 1400 units in stock, providing reliable procurement availability. Both parts maintain ROHS3 compliance and REACH unaffected status, satisfying regulatory requirements for circuit protection applications.

Frequently Asked Questions (FAQ)

Q: Can TL7726IP be used as a direct replacement for TL7726IPG4?

A: Yes. The TL7726IP is electrically and mechanically identical to the TL7726IPG4, with matching clamping voltage (-200/+205V), circuit count (6), package type (8-DIP), and mounting configuration (through hole).

Q: What is the primary difference between TL7726IPG4 and TL7726IP?

A: The TL7726IPG4 is discontinued at DiGi Electronics, while TL7726IP is currently active. The packaging format differs (TL7726IP is supplied in tube packaging), but electrical performance and pinout remain identical.

Q: Are there any compliance or regulatory differences between these parts?

A: No. Both components are ROHS3 compliant and REACH unaffected, maintaining identical regulatory status.

Q: Does the 8-DIP package dimension (0.300", 7.62mm) remain consistent across both parts?

A: Yes. Both TL7726IPG4 and TL7726IP use the same 8-DIP package with identical physical dimensions, ensuring PCB layout compatibility.