TL7712ACDRG4 Equivalent & Substitute Parts

Part Overview

The TL7712ACDRG4 is a supervisor integrated circuit designed for power management applications, specifically functioning as a simple reset or power-on reset controller. This device monitors a single voltage channel with a threshold of 10.8V and provides open drain or open collector output signaling. The TL7712ACDRG4 carries an obsolete product status, making identification of functionally equivalent alternatives essential for ongoing system support and new design implementations.

Substiute Parts

TL7712ACDRG4

Texas InstrumentsIn Stock: 2360TL7712ACDRG4 Datasheet

Current PartRFQ

TL7712ACDR

Texas InstrumentsIn Stock: 9885TL7712ACDR Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TL7712ACDRG4 is determined by strict equivalence across the following critical parameters:

• Functional Type: Simple Reset/Power-On Reset supervisor
• Voltage Monitoring: Single channel with 10.8V threshold
• Output Stage: Open Drain or Open Collector configuration
• Reset Signaling: Active High/Active Low capability
• Propagation Delay: 1µs maximum
• Package Specification: 8-SOIC form factor with identical physical dimensions
• Thermal Range: 0°C to 70°C operating temperature
• Regulatory Compliance: ROHS3 and REACH status alignment

The TL7712ACDR qualifies as a direct substitute based on identical electrical specifications, package geometry, and compliance certifications. The primary distinction is product status: TL7712ACDR maintains active availability, whereas TL7712ACDRG4 is obsolete.

Parameter Comparison

Engineering Selection Recommendations

The TL7712ACDR is the appropriate selection for applications currently using or requiring the TL7712ACDRG4. Both parts maintain identical electrical and mechanical specifications, ensuring direct functional compatibility. The TL7712ACDR carries active product status with established supply chain availability, eliminating obsolescence risk associated with the TL7712ACDRG4.

Both parts satisfy ROHS3 and REACH compliance requirements, supporting regulatory obligations in manufacturing and distribution. The 8-SOIC package geometry remains consistent, permitting direct PCB layout compatibility without redesign.

Frequently Asked Questions (FAQ)

Q: Can TL7712ACDR replace TL7712ACDRG4 in existing designs?

A: Yes. The TL7712ACDR provides identical electrical performance, voltage threshold, output configuration, and package specifications. Direct substitution is supported without circuit modification.

Q: What is the primary reason for substitution?

A: The TL7712ACDRG4 carries obsolete product status. The TL7712ACDR maintains active availability and supply continuity.

Q: Are there packaging differences between these parts?

A: No. Both parts use 8-SOIC packaging with identical physical dimensions (0.154" width, 3.90mm). PCB footprints are interchangeable.

Q: Do both parts meet the same compliance standards?

A: Yes. Both TL7712ACDRG4 and TL7712ACDR are ROHS3 compliant and REACH unaffected, supporting equivalent regulatory requirements.

Q: Is the propagation delay specification identical?

A: Yes. Both parts specify 1µs maximum propagation delay for reset timeout performance.

Q: What is the operating temperature range for both parts?

A: Both parts operate across 0°C to 70°C ambient temperature range (TA).