TL7702AIPG4 Equivalent & Substitute Parts

Part Overview

The TL7702AIPG4 is a power management integrated circuit (PMIC) functioning as a supervisor with open drain or open collector output for single-channel voltage monitoring and reset control. This device is classified as a Simple Reset/Power-On Reset supervisor designed for through-hole mounting in 8-DIP packages.

The TL7702AIPG4 is discontinued at DiGi Electronics. Identifying equivalent substitute parts ensures continued availability for system design, maintenance, and production requirements while maintaining electrical and mechanical compatibility.

Substiute Parts

TL7702AIPG4

Texas InstrumentsIn Stock: 1067TL7702AIPG4 Datasheet

Current PartRFQ

TL7702AIP

Texas InstrumentsIn Stock: 4729TL7702AIP Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TL7702AIPG4 are identified based on strict electrical and mechanical compatibility criteria. The following parameters determine substitution eligibility:

• Voltage threshold: 2.53V
• Output type: Open Drain or Open Collector
• Reset configuration: Active High/Active Low
• Reset timeout: 1µs Maximum Propagation Delay
• Operating temperature range: -40°C ~ 85°C (TA)
• Package type: 8-DIP (0.300", 7.62mm)
• Supplier device package: 8-PDIP
• Compliance: ROHS3 Compliant, REACH Unaffected

The TL7702AIP meets all these criteria and is classified as a manufacturer-recommended substitute.

Parameter Comparison

Engineering Selection Recommendations

The TL7702AIP is the manufacturer-recommended substitute for the discontinued TL7702AIPG4. Both parts share identical electrical specifications, functional characteristics, and physical packaging. The TL7702AIP maintains active product status with higher inventory availability (4683 Pcs), ensuring supply chain continuity.

Both parts comply with ROHS3 and REACH requirements, supporting regulatory compliance in manufacturing and deployment. The transition from TL7702AIPG4 to TL7702AIP requires no circuit redesign or board layout modifications due to identical pin configuration and electrical performance.

Frequently Asked Questions (FAQ)

Q: Can the TL7702AIP directly replace the TL7702AIPG4 in existing designs?

A: Yes. The TL7702AIP is electrically and mechanically identical to the TL7702AIPG4. Both devices feature the same voltage threshold (2.53V), output type (Open Drain or Open Collector), reset configuration, propagation delay, operating temperature range, and 8-PDIP package. No circuit modifications are required.

Q: What is the difference between TL7702AIPG4 and TL7702AIP?

A: The primary difference is product status and packaging specification. The TL7702AIPG4 is discontinued, while the TL7702AIP is active. The TL7702AIP is supplied in tube packaging, whereas the TL7702AIPG4 packaging specification is not provided. All electrical and functional parameters are identical.

Q: Are there any compliance or certification differences?

A: No. Both the TL7702AIPG4 and TL7702AIP are ROHS3 Compliant and REACH Unaffected. They meet identical regulatory requirements for manufacturing and deployment.

Q: What is the pin configuration for the 8-PDIP package?

A: Both parts use the 8-PDIP (8-Pin Dual In-line Package) with 0.300" (7.62mm) spacing. This standard through-hole package is compatible with conventional PCB layouts and breadboard prototyping.

Q: Is the TL7702AIP available in higher quantities?

A: Yes. The TL7702AIP has 4683 Pcs in stock, compared to 1008 Pcs for the discontinued TL7702AIPG4, providing improved supply availability for production requirements.