TL6110DF130QP Equivalent & Substitute Parts

Part Overview

The TL6110DF130QP is a tactile switch manufactured by E-Switch, classified as SPST-NO (Single Pole Single Throw - Normally Open) with a contact rating of 0.05A at 12VDC. This component features side actuation, through-hole right-angle mounting, and an operating force of 130gf. The product is currently obsolete, necessitating identification of active equivalent parts to maintain design continuity and ensure supply chain availability for new production runs and field replacements.

Substiute Parts

TL6110DF130QP

E-SwitchIn Stock: 920TL6110DF130QP Datasheet

Current PartRFQ

TL6110DF160QP

E-SwitchIn Stock: 6487TL6110DF160QP Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TL6110DF130QP is determined by strict adherence to the following critical parameters:

Mandatory Matching Parameters:

• Circuit configuration: SPST-NO
• Switch function: Off-Mom (Momentary)
• Contact rating: 0.05A @ 12VDC
• Mounting type: Through Hole, Right Angle
• Actuator orientation: Side Actuated
• Actuator length: 8.80mm
• Outline dimensions: 8.30mm x 5.80mm
• Switch travel: 0.50mm
• Termination style: PC Pin
• Operating temperature range: -40°C ~ 85°C
• Mechanical life: 1,000,000 Cycles
• Actuator material: Polyamide (PA), Nylon

Allowable Variation Parameter:

• Operating force: Substitutes within the TL6110 series may vary in operating force specification while maintaining all other electrical and mechanical characteristics.

The TL6110DF160QP qualifies as a substitute based on matching all mandatory parameters while differing only in operating force (160gf versus 130gf).

Parameter Comparison

Engineering Selection Recommendations

The TL6110DF160QP is the qualified substitute for the obsolete TL6110DF130QP. Selection of the substitute part is supported by the following engineering criteria:

Product Status: The TL6110DF160QP maintains Active product status, ensuring continued availability and manufacturer support, whereas the TL6110DF130QP is classified as Obsolete.

Regulatory Compliance: Both parts maintain identical ROHS3 compliance, REACH Unaffected status, and Moisture Sensitivity Level 1 (Unlimited), confirming equivalent environmental and regulatory standing.

Electrical and Mechanical Compatibility: The substitute part maintains identical circuit configuration (SPST-NO), contact rating (0.05A @ 12VDC), mounting geometry (Through Hole, Right Angle), and physical dimensions (8.30mm x 5.80mm), ensuring direct PCB compatibility without layout modification.

Operating Force Differential: The TL6110DF160QP operates at 160gf compared to the original 130gf. This 30gf increase represents a 23% higher actuation force. Circuit designs dependent on the specific tactile feedback or actuation force of the 130gf variant require functional assessment prior to substitution.

Supply Chain Availability: The TL6110DF160QP demonstrates significantly higher inventory availability (6392 Pcs) compared to the original part (908 Pcs), supporting production continuity and field service requirements.

Frequently Asked Questions (FAQ)

Q: Can the TL6110DF160QP be used as a direct replacement for the TL6110DF130QP in existing designs?

A: The TL6110DF160QP is mechanically and electrically compatible with the TL6110DF130QP for PCB mounting and circuit integration. The primary difference is the operating force specification (160gf versus 130gf). Designs where tactile feedback or actuation force is a functional requirement must be evaluated for the 30gf increase.

Q: What is the significance of the operating force difference between these parts?

A: Operating force defines the mechanical pressure required to actuate the switch. The TL6110DF160QP requires 30gf additional force compared to the TL6110DF130QP. This affects user interface feel and may impact applications with force-sensitive actuation requirements.

Q: Are there any differences in electrical performance between the two parts?

A: No. Both parts maintain identical circuit configuration (SPST-NO), contact rating (0.05A @ 12VDC), switch travel (0.50mm), and mechanical life (1,000,000 Cycles). Electrical performance is equivalent.

Q: What packaging format is the substitute part supplied in?

A: The TL6110DF160QP is supplied in Tube packaging, whereas the original TL6110DF130QP packaging format is not specified. Confirm packaging requirements for your procurement and assembly processes.

Q: Are both parts RoHS and REACH compliant?

A: Yes. Both the TL6110DF130QP and TL6110DF160QP are ROHS3 Compliant and REACH Unaffected, maintaining identical regulatory status.

Q: Why is the TL6110DF130QP classified as Obsolete?

A: Product obsolescence is determined by the manufacturer. The TL6110DF160QP, classified as Active, is the current production equivalent within the TL6110 series and is recommended for new designs and ongoing supply requirements.