TL3301DF160RG Equivalent & Substitute Parts

Part Overview

The TL3301DF160RG is an active SPST-NO tactile switch manufactured by E-Switch, designed for surface mount applications with a 0.05A contact rating at 12VDC. This component operates with an off-momentary switch function and features a 160gf operating force with standard polyamide actuator material. Finding equivalent substitute parts becomes necessary when managing supply chain continuity, optimizing inventory across multiple suppliers, or addressing specific application requirements related to actuator height, operating force, or mechanical life specifications.

Substiute Parts

TL3301DF160RG

E-SwitchIn Stock: 1080TL3301DF160RG Datasheet

Current PartRFQ

95C06D4GWRT

Grayhill Inc.In Stock: 114095C06D4GWRT Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TL3301DF160RG is determined by strict alignment with the following critical parameters:

• Circuit Configuration: Must be SPST-NO (Single Pole Single Throw, Normally Open)
• Contact Rating: Must support 0.05A @ 12VDC minimum
• Switch Function: Must be Off-Mom (Off-Momentary)
• Mounting Type: Must be Surface Mount
• Actuator Orientation: Must be Top Actuated
• Termination Style: Must be Gull Wing
• Switch Travel: Must be 0.25mm
• Compliance: Must maintain ROHS3 compliance and REACH Unaffected status

Substitute parts may vary in actuator height, outline dimensions, operating force, mechanical life, and operating temperature range within acceptable engineering tolerances for the application. The 95C06D4GWRT from Grayhill Inc. meets all mandatory substitution criteria while offering different performance characteristics in secondary parameters.

Parameter Comparison

Engineering Selection Recommendations

Both the TL3301DF160RG and 95C06D4GWRT maintain active product status with full ROHS3 compliance and REACH Unaffected certification, ensuring regulatory alignment for current and future applications. Selection between these parts should be based on specific application requirements regarding actuator height, operating force, and mechanical life cycle expectations. The TL3301DF160RG provides a lower operating force profile (160gf) with standard mechanical life (100,000 cycles), while the 95C06D4GWRT offers increased operating force (260gf), extended mechanical life (500,000 cycles), and reduced actuator height (9.50mm versus 13.00mm). PCB layout constraints, user interface tactile feedback requirements, and expected product lifecycle should guide the final component selection.

Frequently Asked Questions (FAQ)

Q: Can the 95C06D4GWRT directly replace the TL3301DF160RG in existing designs?

A: Direct replacement requires verification of three factors: (1) PCB layout accommodation for the 9.50mm actuator height versus the original 13.00mm, (2) user interface compatibility with the higher 260gf operating force versus 160gf, and (3) outline dimension tolerance for the 6.20mm x 6.20mm footprint versus 6.00mm x 6.00mm. Both parts share identical circuit configuration, contact rating, switch function, and termination style.

Q: What are the key differences in mechanical performance?

A: The 95C06D4GWRT provides five times greater mechanical life (500,000 cycles versus 100,000 cycles) and operates with 100gf higher actuator force. The TL3301DF160RG operates across a wider temperature range (-20°C to 70°C versus -25°C to 70°C for the substitute).

Q: Are both parts suitable for high-cycle applications?

A: The TL3301DF160RG is rated for 100,000 mechanical cycles, appropriate for standard-duty applications. The 95C06D4GWRT, rated for 500,000 cycles, is suitable for extended-cycle or high-reliability applications requiring greater mechanical durability.

Q: Do packaging and compliance certifications differ between these parts?

A: Both parts are supplied in Tape & Reel packaging, maintain ROHS3 compliance, carry REACH Unaffected status, and share identical ECCN (EAR99) and HTSUS (8536.50.9031) classifications.

Q: What should be considered for PCB redesign if substituting these parts?

A: The primary design consideration is actuator height: the 95C06D4GWRT is 4.60mm shorter (9.50mm versus 13.00mm), which may affect overlay clearance, user interface ergonomics, and tactile feedback perception due to the increased operating force (260gf versus 160gf).