TL3301CF160RJ Equivalent & Substitute Parts

Part Overview

The TL3301CF160RJ is an active SPST-NO tactile switch manufactured by E-Switch, designed for surface mount applications with a 0.05A @ 12VDC contact rating. This component is specified for off-momentary operation with a 160gf operating force and 8.00mm actuator height. Substitute parts are identified when equivalent electrical performance, mechanical compatibility, and regulatory compliance can be maintained across different manufacturers while accommodating application-specific requirements for actuator height, operating force, and mechanical durability.

Substiute Parts

TL3301CF160RJ

E-SwitchIn Stock: 1014TL3301CF160RJ Datasheet

Current PartRFQ

95CW06C3JT

Grayhill Inc.In Stock: 80695CW06C3JT Datasheet

MFR RecommendedRFQ

95CW06E5JT

Grayhill Inc.In Stock: 82395CW06E5JT Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TL3301CF160RJ is determined by the following critical parameters:

• Electrical Compatibility: Circuit configuration (SPST-NO), contact rating (0.05A @ 12VDC), and switch function (Off-Mom) must remain identical
• Mechanical Compatibility: Surface mount mounting type and J lead termination style are required
• Regulatory Compliance: RoHS3 compliance and REACH unaffected status must be maintained
• Physical Constraints: Outline dimensions and actuator orientation (top actuated) establish the baseline for mechanical fit

The identified substitute parts (95CW06C3JT and 95CW06E5JT) maintain full electrical and regulatory equivalence. Variations in actuator height (4.60mm and 5.20mm versus 8.00mm), operating force (260gf and 360gf versus 160gf), switch travel (0.45mm versus 0.25mm), and mechanical life (500,000 cycles versus 100,000 cycles) reflect design differences that may be accommodated depending on application requirements. These parameters do not affect electrical substitutability but must be evaluated for mechanical fit and tactile response compatibility.

Parameter Comparison

Engineering Selection Recommendations

All three parts maintain active product status and full ROHS3 compliance with REACH unaffected designation, ensuring regulatory equivalence for new designs and ongoing production.

The TL3301CF160RJ remains the primary specification when the 8.00mm actuator height and 160gf operating force are design requirements. The E-Switch part is suitable for applications requiring lower actuation force and minimal switch travel.

The 95CW06C3JT (Grayhill) is electrically equivalent with a reduced actuator height of 4.60mm, higher operating force of 260gf, and extended mechanical life of 500,000 cycles. This part is applicable when space constraints require lower profile actuators or when increased durability is required.

The 95CW06E5JT (Grayhill) is electrically equivalent with a mid-range actuator height of 5.20mm, higher operating force of 360gf, and extended mechanical life of 500,000 cycles. This part accommodates applications requiring moderate actuator height with increased tactile feedback and durability.

Selection between substitute parts depends on PCB clearance constraints, tactile response requirements, and expected cycle life demands. All parts share identical electrical performance and regulatory compliance.

Frequently Asked Questions (FAQ)

Q: Can 95CW06C3JT or 95CW06E5JT be used as direct replacements for TL3301CF160RJ?

A: Yes, from an electrical standpoint. Both Grayhill parts maintain identical circuit configuration (SPST-NO), contact rating (0.05A @ 12VDC), and switch function (Off-Mom). However, mechanical differences in actuator height, operating force, and switch travel must be evaluated for your specific application. PCB layout and user interface design may require adjustment.

Q: What are the key mechanical differences between these parts?

A: The TL3301CF160RJ has an 8.00mm actuator height with 160gf operating force and 0.25mm switch travel. The 95CW06C3JT has a 4.60mm height with 260gf force and 0.45mm travel. The 95CW06E5JT has a 5.20mm height with 360gf force and 0.45mm travel. These differences affect tactile feedback, PCB clearance requirements, and mechanical durability.

Q: Are there packaging differences?

A: Yes. The TL3301CF160RJ is supplied in Tape & Reel (TR) packaging, while both Grayhill substitutes are supplied in Tube packaging. Procurement and assembly processes may require adjustment based on your production volume and handling requirements.

Q: Do all parts meet the same regulatory requirements?

A: Yes. All three parts are ROHS3 compliant, REACH unaffected, and carry EAR99 ECCN classification with identical HTSUS coding (8536.50.9031). Regulatory equivalence is maintained across all options.

Q: Which part should I select for high-cycle applications?

A: Both Grayhill parts (95CW06C3JT and 95CW06E5JT) offer 500,000 mechanical cycles compared to 100,000 cycles for the E-Switch part. Selection between the two Grayhill options depends on your actuator height and operating force requirements.