TL3301AF260RJ Equivalent & Substitute Parts

Part Overview

The TL3301AF260RJ is an active SPST-NO tactile switch manufactured by E-Switch, designed for surface mount applications with a 0.05A @ 12VDC contact rating. This component is commonly used in control panels, consumer electronics, and industrial equipment where reliable momentary switching is required. Alternative models become necessary when specific mechanical characteristics, packaging formats, or operational performance requirements differ from the original specification.

Substiute Parts

TL3301AF260RJ

E-SwitchIn Stock: 1072TL3301AF260RJ Datasheet

Current PartRFQ

95CW06C3JT

Grayhill Inc.In Stock: 80695CW06C3JT Datasheet

MFR RecommendedRFQ

95CW06E5JT

Grayhill Inc.In Stock: 82395CW06E5JT Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TL3301AF260RJ is determined by strict alignment with the following core parameters: SPST-NO circuit configuration, 0.05A @ 12VDC contact rating, surface mount mounting type, top actuated orientation, J lead termination, and momentary switch function. The substitute parts listed (95CW06C3JT and 95CW06E5JT) maintain these critical electrical and functional characteristics, ensuring direct functional compatibility in circuit applications.

Variations in secondary parameters such as actuator height, outline dimensions, actuator material, switch travel, and mechanical life cycle rating do not preclude substitution when the primary electrical and mechanical interface requirements are met. These differences reflect design variations between manufacturers but do not affect the core switching performance in standard applications.

Parameter Comparison

Engineering Selection Recommendations

All three parts maintain active product status and full ROHS3 compliance with unlimited moisture sensitivity rating (MSL 1), ensuring regulatory and environmental compatibility across applications. The TL3301AF260RJ and 95CW06C3JT share identical operating force specifications (260gf), while the 95CW06E5JT operates at 360gf, representing a higher actuation force variant. The Grayhill substitutes offer extended mechanical life (500,000 cycles versus 100,000 cycles) and broader operating temperature range (-25°C to 70°C versus -20°C to 70°C). Outline dimension variations between the E-Switch original (6.00mm x 6.00mm) and Grayhill alternatives (6.30mm x 6.20mm) require PCB layout verification for space-constrained applications. Selection between 95CW06C3JT and 95CW06E5JT depends on actuator height requirements and operating force tolerance in the target application.

Frequently Asked Questions (FAQ)

Q: Can 95CW06C3JT and 95CW06E5JT be used interchangeably with TL3301AF260RJ?

A: Both Grayhill parts maintain the same electrical specifications (SPST-NO, 0.05A @ 12VDC, momentary function) and surface mount J-lead termination. Direct substitution is electrically valid. However, differences in actuator height (4.60mm for 95CW06C3JT, 5.20mm for 95CW06E5JT versus 5.00mm for TL3301AF260RJ) and operating force (360gf for 95CW06E5JT versus 260gf for the original) require application-specific evaluation.

Q: What are the key differences between 95CW06C3JT and 95CW06E5JT?

A: The primary difference is operating force: 95CW06C3JT requires 260gf (matching the original TL3301AF260RJ), while 95CW06E5JT requires 360gf. Actuator height also differs slightly (4.60mm versus 5.20mm). Both share identical electrical ratings, mechanical life (500,000 cycles), and temperature range (-25°C to 70°C).

Q: Do outline dimension differences affect PCB compatibility?

A: The TL3301AF260RJ has a 6.00mm x 6.00mm outline, while both Grayhill substitutes measure 6.30mm x 6.20mm. PCB footprint layouts must accommodate these larger dimensions. Verify available space on the circuit board before selecting a substitute part.

Q: Are all three parts RoHS compliant?

A: Yes. The TL3301AF260RJ, 95CW06C3JT, and 95CW06E5JT are all ROHS3 compliant with MSL 1 (unlimited moisture sensitivity), meeting current environmental and regulatory requirements.

Q: Which substitute offers better mechanical durability?

A: Both Grayhill substitutes (95CW06C3JT and 95CW06E5JT) provide 500,000 mechanical life cycles, compared to 100,000 cycles for the TL3301AF260RJ, representing a five-fold improvement in cycle rating.