TL3016IPWRG4 Equivalent & Substitute Parts

Part Overview

The TL3016IPWRG4 is a single-element comparator with integrated latch functionality, featuring complementary push-pull TTL output configuration in an 8-TSSOP surface mount package. This device is classified as obsolete, which necessitates identification of active equivalent alternatives for ongoing design support and procurement. The TL3016IPWRG4 maintains full electrical and mechanical compatibility with its active counterpart through identical functional specifications and package geometry.

Substiute Parts

TL3016IPWRG4

Texas InstrumentsIn Stock: 1169TL3016IPWRG4 Datasheet

Current PartRFQ

TL3016IPWR

Texas InstrumentsIn Stock: 6531TL3016IPWR Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TL3016IPWRG4 is determined by strict equivalence across all electrical and mechanical parameters. The primary substitution criterion is the base product number TL3016, which defines the core functional specification. All substitute parts must maintain identical values for:

• Number of elements (1)
• Output configuration (Complementary, Push-Pull, TTL)
• Supply voltage range (5V ~ 10V, ±2.5V ~ 5V)
• Input offset voltage (3mV @ ±5V)
• Input bias current (10µA @ ±5V)
• Output current (20mA typical)
• Quiescent current (12.5mA maximum)
• Common-mode rejection ratio (97dB CMRR)
• Propagation delay (10ns maximum)
• Operating temperature range (-40°C ~ 85°C)
• Package geometry (8-TSSOP, 0.173" × 4.40mm)
• Surface mount configuration

The TL3016IPWRG4 differs from its substitute only in packaging format (Digi-Reel® cut tape versus the original specification), while maintaining identical electrical performance and pinout compatibility.

Parameter Comparison

Engineering Selection Recommendations

The TL3016IPWR is the direct active equivalent for the obsolete TL3016IPWRG4. Both parts are manufactured by Texas Instruments and share identical electrical specifications, pinout configuration, and 8-TSSOP package geometry. The TL3016IPWR maintains full ROHS3 compliance, REACH unaffected status, and EAR99 export classification consistent with the original part.

Selection of the TL3016IPWR for replacement applications is based on product status continuity and regulatory compliance alignment. The active status of TL3016IPWR ensures ongoing availability and manufacturing support, eliminating procurement constraints associated with obsolete inventory.

Frequently Asked Questions (FAQ)

Q: Can the TL3016IPWR be used as a direct replacement for the TL3016IPWRG4?

A: Yes. Both parts are electrically and mechanically identical. The TL3016IPWR is the active production equivalent with identical pinout, package dimensions (8-TSSOP), and all electrical parameters including supply voltage range, input offset voltage, output current, and propagation delay.

Q: What is the difference between TL3016IPWRG4 and TL3016IPWR?

A: The primary difference is product status. The TL3016IPWRG4 is obsolete, while the TL3016IPWR is active. The packaging format differs (original specification versus Digi-Reel® cut tape), but electrical performance and pinout remain identical.

Q: Are there any compatibility concerns when switching from TL3016IPWRG4 to TL3016IPWR?

A: No compatibility concerns exist. Both parts operate within the same supply voltage range (5V ~ 10V, ±2.5V ~ 5V), maintain identical input and output specifications, and use the same 8-TSSOP surface mount package with matching pinout.

Q: Does the TL3016IPWR meet the same regulatory requirements as the TL3016IPWRG4?

A: Yes. Both parts are ROHS3 compliant, REACH unaffected, and classified as EAR99 for export purposes. Moisture sensitivity level is identical at MSL 1 (Unlimited).

Q: What is the operating temperature range for the TL3016IPWR?

A: The operating temperature range is -40°C to 85°C, identical to the TL3016IPWRG4.