TL2844BDRG4-8 Equivalent & Substitute Parts

Part Overview

The TL2844BDRG4-8 is a Boost, Flyback, Forward Regulator controller IC manufactured by Texas Instruments, designed for positive output step-up and step-up/step-down DC-DC conversion applications. This active product operates as a transistor driver with frequency control capabilities in an 8-SOIC surface mount package. Substitute parts are identified based on matching electrical specifications, package compatibility, and functional equivalence within the Power Management (PMIC) category.

Key Parameters

Parameter	Value
Manufacturer	Texas Instruments
Category	Power Management (PMIC)
Package / Case	8-SOIC (0.154", 3.90mm Width)
Mounting Type	Surface Mount
Voltage - Supply (Vcc/Vdd)	10V ~ 30V
Frequency - Switching	Up to 500kHz
Duty Cycle (Max)	48%
Output Type	Transistor Driver
Function	Step-Up, Step-Up/Step-Down
Output Configuration	Positive
Topology	Boost, Flyback, Forward
Number of Outputs	1
Operating Temperature	-40°C ~ 85°C (TA)
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the TL2844BDRG4-8 are qualified based on the following criteria:

Electrical Parameter Equivalence: All substitute parts maintain identical supply voltage range (10V ~ 30V), switching frequency capability (up to 500kHz), maximum duty cycle (48%), output type (transistor driver), and functional topology (boost, flyback, forward conversion).

Package Compatibility: All substitutes use the 8-SOIC surface mount package with identical physical dimensions (0.154", 3.90mm width), ensuring direct PCB footprint compatibility.

Compliance & Certification: All parts maintain ROHS3 compliance, MSL Level 1 rating, and identical ECCN/HTSUS classifications.

Functional Scope: Substitutes are grouped by manufacturer (Texas Instruments and STMicroelectronics) and packaging format (tape & reel, cut tape, tube), with variations in operating temperature range and output configuration capabilities.

Parameter Comparison

Part Number	Manufacturer	Packaging	Voltage - Supply	Frequency - Switching	Duty Cycle (Max)	Operating Temperature	Output Configuration	Topology	Product Status
TL2844BDRG4-8	Texas Instruments	Tape & Reel (TR)	10V ~ 30V	Up to 500kHz	48%	-40°C ~ 85°C	Positive	Boost, Flyback, Forward	Active
TL2844BDR-8	Texas Instruments	Cut Tape (CT) & Digi-Reel®	10V ~ 30V	Up to 500kHz	48%	-40°C ~ 85°C	Positive	Boost, Flyback, Forward	Active
UC2844BD1	STMicroelectronics	Tube	10V ~ 30V	Up to 500kHz	48%	-25°C ~ 85°C	Positive, Isolation Capable	Boost, Flyback	Active
UC2844BD1013TR	STMicroelectronics	Cut Tape (CT) & Digi-Reel®	10V ~ 30V	Up to 500kHz	48%	-25°C ~ 85°C	Positive, Isolation Capable	Boost, Flyback	Active
UC3844BD1013TR	STMicroelectronics	Cut Tape (CT) & Digi-Reel®	10V ~ 30V	Up to 500kHz	48%	0°C ~ 70°C	Positive, Isolation Capable	Boost, Flyback	Active

Engineering Selection Recommendations

Texas Instruments TL2844 Series: The TL2844BDR-8 provides parametric equivalence to the TL2844BDRG4-8 with identical electrical specifications and operating temperature range. The primary difference is packaging format (cut tape versus tape & reel), which affects supply chain logistics but not functional performance.

STMicroelectronics UC2844 Series: The UC2844BD1 and UC2844BD1013TR maintain electrical equivalence across all critical parameters. These parts offer isolation-capable output configuration and are available in higher inventory quantities. The operating temperature range is narrower (-25°C ~ 85°C versus -40°C ~ 85°C), which may be a consideration for extended temperature applications.

STMicroelectronics UC3844 Series: The UC3844BD1013TR provides functional equivalence with a reduced operating temperature range (0°C ~ 70°C). This part is suitable for standard industrial temperature applications but not for extended low-temperature operation below 0°C.

All substitute parts maintain active product status, ROHS3 compliance, and identical MSL ratings, ensuring long-term availability and regulatory compliance.

Frequently Asked Questions (FAQ)

Q: Can TL2844BDR-8 directly replace TL2844BDRG4-8 on the PCB?

A: Yes. Both parts share identical electrical specifications, 8-SOIC package dimensions, and operating temperature range. The difference in packaging format (cut tape versus tape & reel) does not affect PCB compatibility or functional performance.

Q: What is the key difference between TL2844 and UC2844 series?

A: The UC2844 series (STMicroelectronics) offers isolation-capable output configuration and operates within a narrower temperature range (-25°C ~ 85°C). The TL2844 series (Texas Instruments) supports boost, flyback, and forward topologies with extended low-temperature operation (-40°C ~ 85°C). Both maintain identical supply voltage, switching frequency, and duty cycle specifications.

Q: Is UC3844BD1013TR suitable for all applications using TL2844BDRG4-8?

A: UC3844BD1013TR is functionally equivalent for applications operating within the 0°C ~ 70°C temperature range. For applications requiring operation below 0°C or above 70°C, the TL2844BDRG4-8 or UC2844 series are required.

Q: Do all substitute parts use the same 8-SOIC package?

A: Yes. All listed substitute parts use the 8-SOIC surface mount package with identical physical dimensions (0.154", 3.90mm width), ensuring direct PCB footprint compatibility without layout modifications.

Q: Are there compliance or certification differences between substitutes?

A: No. All substitute parts maintain ROHS3 compliance, MSL Level 1 rating, and identical ECCN/HTSUS classifications as the TL2844BDRG4-8.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message