TL.10.1HH11W RF Antenna Equivalent & Substitute Parts

Part Overview

The TL.10.1HH11W is a multi-band dome RF antenna manufactured by Taoglas Limited, designed for cellular, navigation, and WiFi applications. This NMO base mount antenna operates across five frequency bands (749MHz, 892MHz, 1.5GHz, 1.9GHz, 2.6GHz) with gains ranging from 1.2dBi to 3.2dBi. The product is currently discontinued at DiGi Electronics, making equivalent substitute parts necessary for ongoing system integration and maintenance applications.

Substiute Parts

TL.10.1HH11W

Taoglas LimitedIn Stock: 1075TL.10.1HH11W Datasheet

Current PartRFQ

TL.10.1HH11

Taoglas LimitedIn Stock: 1339TL.10.1HH11 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TL.10.1HH11W is determined by the following critical parameters:

Mechanical Compatibility: Identical antenna type (Dome), termination standard (NMO), and mounting configuration (Base Mount) are required. The maximum height specification of 3.343" (84.90mm) must be maintained for physical fit within existing enclosures.

Frequency Coverage: The substitute must support the same frequency ranges: 698MHz ~ 800MHz, 824MHz ~ 960MHz, 1.575GHz, 1.71GHz ~ 2.17GHz, and 2.4GHz ~ 2.7GHz. Frequency band count and center frequencies determine RF performance alignment.

Environmental Specifications: Ingress protection rating must meet or exceed IP69K for equivalent environmental sealing.

Regulatory Compliance: RoHS3 compliance and REACH unaffected status must be maintained for supply chain and regulatory continuity.

Series Consistency: Parts from the Taoglas Shockwave series maintain design and performance consistency.

Parameter Comparison

Engineering Selection Recommendations

The TL.10.1HH11 serves as a direct substitute for the discontinued TL.10.1HH11W. Both parts maintain identical mechanical dimensions, frequency coverage ranges, and environmental protection ratings. The substitute part is currently in active production status with confirmed inventory availability (1312 pcs), ensuring supply chain continuity.

Regulatory compliance is maintained across both parts: ROHS3 certification and REACH unaffected status are consistent. The substitute supports an expanded frequency band count (8 bands versus 5 bands in the original), providing enhanced multi-standard coverage while maintaining backward compatibility with the specified frequency ranges.

The NMO Male termination on the substitute part is mechanically and electrically compatible with NMO base mount systems. Both parts are from the Taoglas Shockwave series, ensuring design consistency and performance reliability.

Frequently Asked Questions (FAQ)

Q: Can TL.10.1HH11 replace TL.10.1HH11W in existing installations?

A: Yes. Both parts share identical mechanical dimensions (3.343" height), NMO termination compatibility, base mount configuration, and frequency range coverage (698MHz ~ 800MHz, 824MHz ~ 960MHz, 1.575GHz, 1.71GHz ~ 2.17GHz, 2.4GHz ~ 2.7GHz). The substitute is mechanically and electrically interchangeable.

Q: What is the difference in band count between these parts?

A: The TL.10.1HH11W operates across 5 frequency bands, while the TL.10.1HH11 operates across 8 frequency bands. Both cover the same frequency ranges specified for the original part, with the substitute providing additional band support.

Q: Are environmental protection ratings equivalent?

A: The TL.10.1HH11W specifies IP69K ingress protection. The TL.10.1HH11 substitute specifies both IP67 and IP69K ratings, meeting or exceeding the original specification.

Q: Is regulatory compliance maintained with the substitute part?

A: Yes. Both parts maintain ROHS3 compliance and REACH unaffected status, ensuring regulatory continuity for supply chain and end-use applications.

Q: What is the availability status of each part?

A: The TL.10.1HH11W is discontinued at DiGi Electronics. The TL.10.1HH11 substitute is in active production status with 1312 pcs in current inventory.