TL100-D1C Current Sensor 100A Hall Effect Module

Part Overview

The TL100-D1C is a 100A single-channel Hall Effect current sensor manufactured by Mornsun America, LLC. This closed-loop bidirectional module features a single pass-through design for AC/DC current measurement applications. The part is currently in Active product status with 719 units in stock. Alternative models may be required due to design phase transitions, supply chain considerations, or specific application requirements where substitute parts maintain identical electrical and mechanical specifications.

Substiute Parts

TL100-D1C

Mornsun America, LLCIn Stock: 801TL100-D1C Datasheet

Current PartRFQ

TL100P-D1C

Mornsun America, LLCIn Stock: 897TL100P-D1C Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TL100-D1C is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part TL100P-D1C maintains identical specifications in the following key areas:

Electrical Parameters (Must Match):

• Current sensing capacity: 100A
• Sensor technology: Hall Effect, Closed Loop
• Measurement capability: AC/DC bidirectional
• Output configuration: Ratiometric, Current
• Frequency response: 0Hz ~ 100kHz
• Linearity tolerance: ±0.1%
• Accuracy specification: ±0.5%
• Supply voltage range: ±12V ~ 15V
• Response time: 1µs
• Maximum supply current: 25mA
• Operating temperature range: -40°C ~ 85°C

Mechanical Parameters (Must Match):

• Single channel configuration
• Chassis mount design
• Module with single pass-through construction
• Tray packaging format

Compliance Parameters (Must Match):

• RoHS3 compliance
• ECCN classification: EAR99
• HTSUS code: 9030.33.3800

The TL100P-D1C is classified as "Not For New Designs" but remains functionally equivalent for applications requiring direct replacement of the active TL100-D1C.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection: TL100-D1C

The TL100-D1C is the recommended choice for new designs and applications. This part maintains Active product status, indicating ongoing manufacturer support and availability. With 719 units in current inventory, supply continuity is established. The part is ROHS3 compliant and carries EAR99 export classification, meeting standard regulatory requirements for industrial current sensing applications.

Alternative Selection: TL100P-D1C

The TL100P-D1C is available as a direct substitute where the TL100-D1C is unavailable or where existing designs require component replacement. This part is designated "Not For New Designs," indicating it represents a previous product generation. However, all electrical and mechanical parameters remain identical to the primary part, ensuring functional compatibility in existing applications. The TL100P-D1C maintains 820 units in inventory and carries identical compliance certifications (ROHS3, EAR99).

Selection Criteria:

• Use TL100-D1C for new product development and long-term production programs
• Use TL100P-D1C only for replacement of existing TL100-D1C installations or where supply of the primary part is constrained
• Both parts are suitable for AC/DC current measurement applications requiring 100A sensing capacity with ±0.5% accuracy
• Both parts support bidirectional current measurement with 1µs response time across the 0Hz to 100kHz frequency range
• Both parts operate within -40°C to 85°C temperature range with identical supply voltage requirements (±12V ~ 15V)

Frequently Asked Questions (FAQ)

Q: Can TL100P-D1C be used as a direct replacement for TL100-D1C in existing designs?

A: Yes. The TL100P-D1C is electrically and mechanically equivalent to the TL100-D1C. All critical parameters including current sensing range, accuracy, linearity, frequency response, supply voltage, response time, and operating temperature are identical. The parts are interchangeable at the component level.

Q: What does "Not For New Designs" mean for the TL100P-D1C?

A: This designation indicates that the TL100P-D1C represents a previous product generation. Mornsun America, LLC recommends using the TL100-D1C for new product development. However, the TL100P-D1C remains available for replacement applications and maintains full functional equivalence.

Q: Are there any differences in packaging or mounting between these parts?

A: No. Both the TL100-D1C and TL100P-D1C use identical packaging: Tray format with Chassis Mount configuration. Both are Module type with single pass-through design. No modifications to PCB layout, mechanical mounting, or connector interfaces are required when substituting between these parts.

Q: Do both parts meet the same compliance requirements?

A: Yes. Both the TL100-D1C and TL100P-D1C are ROHS3 compliant, carry EAR99 export classification, and share the same HTSUS code (9030.33.3800). No compliance differences exist between the parts.

Q: What is the frequency response capability of these sensors?

A: Both parts support frequency response from 0Hz to 100kHz, enabling measurement of DC current, AC current at power line frequencies (50/60Hz), and higher frequency AC components up to 100kHz.

Q: Can these sensors measure both positive and negative current?

A: Yes. Both the TL100-D1C and TL100P-D1C feature bidirectional polarization, allowing measurement of current flow in both directions. This is essential for applications requiring AC current measurement or bidirectional DC current sensing.

Q: What is the response time specification?

A: Both parts have a response time of 1µs, indicating the sensor output reaches 90% of final value within 1 microsecond of a current step change. This fast response time supports high-speed current monitoring and control applications.

Q: Are there inventory considerations when selecting between these parts?

A: The TL100-D1C has 719 units in stock, while the TL100P-D1C has 820 units available. For immediate availability, the TL100P-D1C offers slightly higher inventory. However, the TL100-D1C's Active status ensures continued supply for long-term production requirements.