TL082BCP-NG Equivalent & Substitute Parts Reference

Part Overview

The TL082BCP-NG, manufactured by Texas Instruments, is a J-FET operational amplifier in the Linear, Amplifiers category. It integrates two amplifier circuits in a push-pull configuration within an 8-DIP (0.300", 7.62mm) package suitable for through-hole mounting. The device is graded for automotive applications and qualified to AEC-Q100 standards. Product status is designated as "Last Time Buy," indicating imminent discontinuation or limited future availability. Identifying substitute or equivalent models is necessary to ensure continuity in engineering designs and inventory management.

Substiute Parts

TL082BCP-NG

Texas InstrumentsIn Stock: 1157TL082BCP-NG Datasheet

Current PartRFQ

TL082BCP

Texas InstrumentsIn Stock: 1933TL082BCP Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute models are grouped according to strict equivalence in the following key parameters: amplifier type (J-FET), number of circuits (2), slew rate (13V/µs), gain bandwidth product (3 MHz), input bias current (30 pA), input offset voltage (2 mV), supply current (1.4mA), minimum and maximum supply voltage (10 V to 30 V), operating temperature (0°C ~ 70°C), mounting type (through-hole), package/case (8-DIP with a 0.300" pitch), RoHS compliance, and MSL status. Only substitute parts matching all these technical requirements are considered valid alternatives.

Parameter Comparison

Engineering Selection Recommendations

The TL082BCP-NG is classified as "Last Time Buy." Engineers should select substitute products with identical parameters and compliance. The TL082BCP, also from Texas Instruments, meets all relevant technical, packaging, and regulatory requirements as provided. RoHS3 compliance and Not Applicable MSL are confirmed for both models.

Frequently Asked Questions (FAQ)

Q1: What determines equivalence for TL082BCP-NG substitute models?
Equivalence is strictly determined by amplifier type, number of circuits, slew rate, gain bandwidth, input bias current, input offset voltage, supply current, supply voltage range, operating temperature range, package type, mounting type, RoHS compliance, and MSL.

Q2: Is TL082BCP a direct substitute for TL082BCP-NG?
Based on the provided parameters, TL082BCP matches all key electrical, mechanical, and compliance criteria required for direct substitution.

Q3: Are there any differences in package or mounting between TL082BCP-NG and TL082BCP?
Both models use the 8-DIP (0.300", 7.62mm) package and are designed for through-hole mounting.

Q4: Do inventory levels affect substitute selection?
Inventory data is provided, but selection must be based solely on technical parameters and product status.

Q5: What compliance standards are met by both models?
Both TL082BCP-NG and TL082BCP are RoHS3 Compliant and have a Not Applicable Moisture Sensitivity Level (MSL).