TL072CP-NG Equivalent & Substitute Parts Reference

Part Overview

The TL072CP-NG from Texas Instruments is a general purpose operational amplifier, categorized under Linear, Amplifiers. It features two push-pull amplifier circuits in an 8-PDIP through-hole package. The device has reached Last Time Buy status, necessitating identification of substitute models for continued design support and procurement. Alternative models must be assessed strictly according to the provided electrical, mechanical, and compliance parameters.

Key Parameters

Parameter	Value
Manufacturer Part Number	TL072CP-NG
Amplifier Type	General Purpose
Number of Circuits	2
Output Type	Push-Pull
Slew Rate	20V/µs
Gain Bandwidth Product	5.25 MHz
Current - Input Bias	65 pA
Voltage - Input Offset	3 mV
Current - Supply	1.4mA (x2 Channels)
Voltage - Supply Span (Min)	4.5 V
Voltage - Supply Span (Max)	40 V
Operating Temperature	0°C ~ 70°C (TA)
Mounting Type	Through Hole
Package / Case	8-DIP (0.300", 7.62mm)
Supplier Device Package	8-PDIP
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	Not Applicable

Substitute Part Grouping Explanation

Substitute determination for TL072CP-NG is based strictly on the following matched parameters: amplifier type, number of circuits, key electrical characteristics (slew rate, gain bandwidth, input bias current, input offset voltage, supply current), voltage supply range, operating temperature, mounting type, package/case, RoHS status, and moisture sensitivity level. Only parts meeting the exact electrical, mechanical, and compliance specifications are included as substitutes.

Parameter Comparison

Parameter	TL072CP-NG	TL072CP
Manufacturer	Texas Instruments	Texas Instruments
Category	Linear, Amplifiers	Linear, Amplifiers
Amplifier Type	General Purpose	J-FET
Number of Circuits	2	2
Slew Rate	20V/µs	13V/µs
Gain Bandwidth Product	5.25 MHz	5.25 MHz
Current - Input Bias	65 pA	65 pA
Voltage - Input Offset	3 mV	3 mV
Current - Supply	1.4mA (x2 Channels)	1.4mA (x2 Channels)
Voltage - Supply Span (Min)	4.5 V	10 V
Voltage - Supply Span (Max)	40 V	30 V
Operating Temperature	0°C ~ 70°C (TA)	0°C ~ 70°C (TA)
Mounting Type	Through Hole	Through Hole
Package / Case	8-DIP (0.300", 7.62mm)	8-DIP (0.300", 7.62mm)
Supplier Device Package	8-PDIP	8-PDIP
RoHS Status	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	Not Applicable	Not Applicable

Engineering Selection Recommendations

Component selection between TL072CP-NG and TL072CP is based on product status and regulatory compliance information provided. TL072CP-NG is designated Last Time Buy, while TL072CP is listed as Active, both supplying ROHS3 Compliant status and identical moisture sensitivity levels. These compliance credentials ensure direct interchangeability from a regulatory standpoint.

Frequently Asked Questions (FAQ)

Q1: What parameters should be matched when selecting a substitute for a general purpose amplifier in the 8-DIP package?
A1: Match amplifier type, number of circuits, slew rate, gain bandwidth, input bias current, input offset voltage, supply current, supply voltage range, operating temperature, mounting type, package/case dimensions, RoHS compliance, and moisture sensitivity level.

Q2: Is TL072CP a direct substitute for TL072CP-NG regarding form factor and mounting type?
A2: Both parts have the 8-DIP (0.300", 7.62mm) package and through-hole mounting, allowing direct physical interchange.

Q3: Are there regulatory compliance differences between TL072CP-NG and TL072CP?
A3: Both components are ROHS3 Compliant and have Not Applicable moisture sensitivity levels.

Q4: Is the operating temperature range consistent between TL072CP-NG and TL072CP?
A4: Both devices are rated for 0°C ~ 70°C (TA).

Q5: Does product status affect engineering selection?
A5: TL072CP-NG is Last Time Buy while TL072CP is Active. Selection should consider product availability as indicated by the current status.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message