TL062CPWG4 Equivalent & Substitute Parts

Part Overview

The TL062CPWG4 is a J-FET input operational amplifier manufactured by Texas Instruments, configured as a dual-channel (2 circuit) device in an 8-TSSOP surface mount package. This component is designed for low-noise, high-impedance input applications requiring precision amplification with J-FET input characteristics.

The TL062CPWG4 has been discontinued at DiGi Electronics. Equivalent substitute parts are available to maintain design continuity and ensure supply chain reliability for applications currently utilizing this device.

Substiute Parts

TL062CPWG4

Texas InstrumentsIn Stock: 974TL062CPWG4 Datasheet

Current PartRFQ

TL062CPW

Texas InstrumentsIn Stock: 2026TL062CPW Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TL062CPWG4 is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Criteria:

• Amplifier Type: J-FET (required for input impedance and noise characteristics)
• Number of Circuits: 2 (dual-channel configuration)
• Slew Rate: 3.5 V/µs (frequency response performance)
• Gain Bandwidth Product: 1 MHz (bandwidth specification)
• Current - Input Bias: 30 pA (input current specification)
• Voltage - Input Offset: 3 mV (DC accuracy)
• Current - Supply: 200 µA (x2 Channels) (power consumption)
• Voltage - Supply Span: 10 V to 30 V (operating voltage range)
• Operating Temperature: 0°C ~ 70°C (TA) (thermal operating range)

Mechanical Equivalence Criteria:

• Package / Case: 8-TSSOP (0.173", 4.40 mm Width) (PCB footprint compatibility)
• Mounting Type: Surface Mount (assembly process compatibility)

Compliance Equivalence Criteria:

• RoHS Status: ROHS3 Compliant (regulatory requirement)
• Moisture Sensitivity Level: 1 (Unlimited) (handling and storage requirements)

The TL062CPW is identified as the manufacturer-recommended substitute. This part maintains identical electrical specifications and package configuration while differing only in packaging format (Tube vs. TSSOP).

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: TL062CPW

The TL062CPW is the manufacturer-recommended equivalent for the TL062CPWG4. Both parts are manufactured by Texas Instruments and maintain complete electrical and mechanical compatibility. The TL062CPW is designated as "Last Time Buy" status, indicating extended availability compared to the discontinued TL062CPWG4.

Compliance and Certification:

Both the TL062CPWG4 and TL062CPW carry identical regulatory certifications:

• ROHS3 Compliant
• Moisture Sensitivity Level 1 (Unlimited)
• REACH Unaffected
• ECCN: EAR99
• HTSUS: 8542.33.0001

Inventory Considerations:

The TL062CPW offers superior inventory availability (2000 Pcs) compared to the TL062CPWG4 (948 Pcs), supporting long-term supply chain planning for production environments.

Packaging Format Difference:

The primary distinction between these parts is packaging format: TL062CPWG4 is supplied in TSSOP format, while TL062CPW is supplied in Tube format. Both formats contain identical die and electrical performance. Selection between these formats depends on assembly process requirements and inventory management protocols.

Frequently Asked Questions (FAQ)

Q: Can the TL062CPW directly replace the TL062CPWG4 in existing designs?

A: Yes. The TL062CPW is electrically and mechanically equivalent to the TL062CPWG4. Both devices share identical electrical specifications, package dimensions (8-TSSOP, 0.173", 4.40 mm Width), and pin configurations. PCB layouts and circuit designs require no modification.

Q: What is the difference between TL062CPWG4 and TL062CPW?

A: The primary difference is packaging format. TL062CPWG4 is supplied in TSSOP packaging, while TL062CPW is supplied in Tube packaging. The electrical performance, die, and pin configuration are identical. The packaging format affects only the delivery method and inventory handling procedures.

Q: Are there any electrical performance differences between these parts?

A: No. Both parts maintain identical electrical specifications across all parameters: Slew Rate (3.5 V/µs), Gain Bandwidth Product (1 MHz), Input Bias Current (30 pA), Input Offset Voltage (3 mV), Supply Current (200 µA per channel), and Operating Temperature Range (0°C ~ 70°C).

Q: What is the significance of the "Last Time Buy" status for TL062CPW?

A: "Last Time Buy" indicates that Texas Instruments has announced the end of production for this part number. Customers requiring this device should secure inventory during the Last Time Buy period. After this period, the part will no longer be available from the manufacturer.

Q: Are both parts RoHS compliant?

A: Yes. Both the TL062CPWG4 and TL062CPW are ROHS3 Compliant and carry identical regulatory certifications including REACH Unaffected status.

Q: What is the Moisture Sensitivity Level (MSL) for these parts?

A: Both parts carry MSL 1 (Unlimited), indicating no moisture sensitivity restrictions. These components do not require special moisture control during storage or handling.

Q: Can these parts be used interchangeably in high-volume production?

A: Yes, provided that the assembly process can accommodate the packaging format difference. TL062CPWG4 (TSSOP format) and TL062CPW (Tube format) are electrically and mechanically identical. Production line compatibility depends on the specific pick-and-place equipment and tape-and-reel or tube feeding capabilities.