TL062CPW Equivalent & Substitute Parts

Part Overview

The TL062CPW is a J-FET input operational amplifier featuring dual circuits in an 8-TSSOP surface mount package. This device is classified as Last Time Buy, indicating discontinued production with limited availability. The TL062CPW serves applications requiring low input bias current and stable gain-bandwidth characteristics across industrial temperature ranges. Identification of equivalent substitute parts is necessary due to product status transition and inventory constraints.

Substiute Parts

TL062CPW

Texas InstrumentsIn Stock: 2026TL062CPW Datasheet

Current PartRFQ

TL062CPWR

Texas InstrumentsIn Stock: 2295TL062CPWR Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TL062CPW is determined by electrical and mechanical parameter equivalence. The following criteria establish valid substitution:

Electrical Equivalence Requirements:

• Amplifier Type: J-FET input configuration
• Number of Circuits: Dual (2) operational amplifiers
• Slew Rate: 3.5 V/µs
• Gain Bandwidth Product: 1 MHz
• Current - Input Bias: 30 pA
• Voltage - Input Offset: 3 mV
• Current - Supply: 200 µA per channel
• Voltage - Supply Span: 10 V minimum to 30 V maximum
• Operating Temperature Range: 0°C to 70°C

Mechanical Equivalence Requirements:

• Package / Case: 8-TSSOP (0.173", 4.40mm Width)
• Mounting Type: Surface Mount
• Base Product Number: TL062

Compliance Requirements:

• RoHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

The TL062CPWR meets all electrical and mechanical equivalence criteria and serves as a direct substitute. The primary distinction is packaging format: tube versus tape & reel.

Parameter Comparison

Engineering Selection Recommendations

The TL062CPWR is a direct electrical and mechanical equivalent to the TL062CPW. Selection between these parts is determined by packaging and availability requirements rather than functional performance.

TL062CPW Selection Criteria:

• Tube packaging format required for specific assembly processes
• Last Time Buy status; limited inventory availability (2000 pcs)
• Suitable for applications where tube packaging is specified

TL062CPWR Selection Criteria:

• Tape & Reel packaging format for high-volume automated assembly
• Active product status with sustained manufacturing support
• Higher inventory availability (2200 pcs)
• Recommended for new designs and production continuity

Both parts maintain identical electrical performance, thermal characteristics, and regulatory compliance (ROHS3, REACH Unaffected, EAR99 classification). The choice between TL062CPW and TL062CPWR depends on assembly equipment compatibility and long-term supply chain requirements. The TL062CPWR is recommended for applications requiring sustained availability and automated pick-and-place assembly processes.

Frequently Asked Questions (FAQ)

Q: Are TL062CPW and TL062CPWR electrically identical?

A: Yes. Both devices are manufactured by Texas Instruments with identical electrical specifications including slew rate (3.5 V/µs), gain bandwidth product (1 MHz), input bias current (30 pA), and supply voltage range (10 V to 30 V). All performance parameters are equivalent.

Q: What is the difference between TL062CPW and TL062CPWR?

A: The primary differences are packaging format and product status. TL062CPW is supplied in tube packaging and carries Last Time Buy status. TL062CPWR is supplied in tape & reel format and maintains Active product status with ongoing manufacturing support.

Q: Can TL062CPWR be used as a direct replacement for TL062CPW?

A: Yes, provided the assembly process accommodates tape & reel packaging. The electrical performance and pinout are identical. Tape & reel format is compatible with automated surface mount assembly equipment.

Q: Can TL062CPW be used as a direct replacement for TL062CPWR?

A: Yes, provided the assembly process accommodates tube packaging. The electrical performance and pinout are identical. Tube format is suitable for manual assembly or equipment configured for tube-based component feeding.

Q: What does Last Time Buy status mean for TL062CPW?

A: Last Time Buy indicates that Texas Instruments has discontinued production of this part number. Existing inventory is available for purchase, but no future manufacturing runs are planned. Once inventory is depleted, the part will no longer be available.

Q: Is the 8-TSSOP package identical for both parts?

A: Yes. Both TL062CPW and TL062CPWR use the 8-TSSOP package with 0.173" width (4.40mm). Pin configuration, spacing, and PCB footprint are identical.

Q: Are there any compliance or regulatory differences between these parts?

A: No. Both parts are ROHS3 Compliant, REACH Unaffected, and classified as EAR99 for export control purposes. Moisture Sensitivity Level is 1 (Unlimited) for both devices.

Q: What is the recommended part for new product designs?

A: TL062CPWR is recommended for new designs due to Active product status and sustained manufacturing support. This ensures long-term availability and supply chain continuity.

Q: Can these parts be used interchangeably in existing designs?

A: Yes, provided the assembly process is compatible with the packaging format of the substitute part. No circuit design changes are required.