TL062CPS Equivalent & Substitute Parts

Part Overview

The TL062CPS is a J-FET input operational amplifier featuring dual circuits in an 8-SO surface mount package, manufactured by Texas Instruments. This device is classified as a Last Time Buy product, indicating limited availability and the necessity to identify equivalent alternatives for ongoing design requirements and production planning. The TL062CPS serves applications requiring low input bias current and stable gain-bandwidth characteristics across industrial temperature ranges.

Substiute Parts

TL062CPS

Texas InstrumentsIn Stock: 2134TL062CPS Datasheet

Current PartRFQ

TL062CDR

Texas InstrumentsIn Stock: 130379TL062CDR Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TL062CPS is determined by strict equivalence across the following electrical and mechanical parameters:

Electrical Equivalence Criteria:

• Amplifier topology: J-FET input configuration
• Circuit count: Dual circuits (2)
• Slew rate: 3.5 V/µs
• Gain bandwidth product: 1 MHz
• Input bias current: 30 pA
• Input offset voltage: 3 mV
• Supply current: 200 µA per channel
• Output current capability: 20 mA per channel
• Supply voltage range: 10 V to 30 V
• Operating temperature range: 0°C to 70°C

Mechanical Equivalence Criteria:

• Surface mount technology
• 8-pin SOIC package configuration
• RoHS3 compliance
• MSL Level 1 rating

The TL062CDR qualifies as a direct substitute based on identical electrical specifications and compatible package geometry within the 8-SOIC family.

Parameter Comparison

Engineering Selection Recommendations

The TL062CDR is the manufacturer-recommended substitute for the TL062CPS. Both devices share identical electrical performance specifications and are manufactured by Texas Instruments under the same base product number (TL062).

Selection Basis:

The TL062CDR maintains full electrical equivalence across all operational parameters, including slew rate, gain bandwidth product, input bias current, and supply voltage range. Both devices are RoHS3 compliant and carry MSL Level 1 ratings, ensuring compatibility with standard manufacturing and storage protocols.

The primary distinction between these parts is packaging format and product status. The TL062CPS is supplied in Tube packaging and carries Last Time Buy status, indicating production discontinuation. The TL062CDR is supplied in Cut Tape and Digi-Reel formats with Active product status, providing assured long-term availability and supply chain continuity.

Package geometry differences (0.209" versus 0.154" width within the 8-SOIC family) are within standard SOIC tolerance specifications and do not affect electrical performance or PCB layout compatibility for standard surface mount assembly processes.

Frequently Asked Questions (FAQ)

Q: Can the TL062CDR directly replace the TL062CPS in existing designs?

A: Yes. The TL062CDR provides complete electrical equivalence across all specified parameters. Both devices are dual J-FET operational amplifiers with identical gain bandwidth, slew rate, input bias current, and supply voltage specifications. Surface mount assembly compatibility is maintained within standard SOIC package tolerances.

Q: What is the difference between the TL062CPS and TL062CDR packaging?

A: The TL062CPS is supplied in Tube packaging, while the TL062CDR is supplied in Cut Tape and Digi-Reel formats. Both use 8-SOIC package geometry with minor width variations (0.209" versus 0.154"). These differences affect supply chain logistics and tape reel compatibility but do not impact electrical performance or PCB assembly.

Q: Why is the TL062CPS marked as Last Time Buy?

A: Last Time Buy status indicates that Texas Instruments has discontinued production of this part number. The TL062CDR, with identical electrical specifications and Active product status, is the designated replacement for ongoing production and new designs.

Q: Are there any compliance or certification differences between these parts?

A: No. Both the TL062CPS and TL062CDR are RoHS3 compliant, REACH unaffected, and carry MSL Level 1 ratings. Compliance certifications are identical.

Q: What is the inventory status of these parts?

A: The TL062CPS has 2,100 pieces available as new original stock. The TL062CDR has 130,300 pieces available, providing significantly greater supply availability for production planning.

Q: Can I use the TL062CDR in applications originally designed for the TL062CPS?

A: Yes. Electrical specifications are identical, and both devices operate across the same temperature range (0°C to 70°C). Standard PCB layout practices for 8-SOIC surface mount packages apply to both parts.