Request Quote
(Ships tomorrow)
TL054IDR Equivalent & Substitute Parts
Part Overview
The TL054IDR is a J-FET input operational amplifier integrated circuit manufactured by Texas Instruments, configured as a 4-circuit linear amplifier in a 14-SOIC surface mount package. This device is part of the LinCMOS™ series and maintains Active product status. The TL054IDR is specified for applications requiring low input bias current, moderate slew rate performance, and operation across a 10V to 30V supply voltage range. Substitute parts are identified to address packaging availability, extended temperature operating ranges, or alternative mounting technologies while maintaining functional equivalence within specified electrical parameters.
Substiute Parts
Key Parameters
| Parameter | Value | Unit |
|---|---|---|
| Amplifier Type | J-FET | — |
| Number of Circuits | 4 | — |
| Slew Rate | 17.8 | V/µs |
| Gain Bandwidth Product | 2.7 | MHz |
| Current - Input Bias | 30 | pA |
| Voltage - Input Offset | 560 | µV |
| Current - Supply (x4 Channels) | 8.4 | mA |
| Current - Output / Channel | 80 | mA |
| Voltage - Supply Span (Min) | 10 | V |
| Voltage - Supply Span (Max) | 30 | V |
| Operating Temperature | -40 to 85 | °C |
| Mounting Type | Surface Mount | — |
| Package / Case | 14-SOIC (0.154", 3.90mm Width) | — |
| RoHS Status | ROHS3 Compliant | — |
| Moisture Sensitivity Level | 1 (Unlimited) | — |
Substitute Part Grouping Explanation
Substitution of the TL054IDR is determined by the following critical parameters: amplifier type (J-FET), number of circuits (4), supply voltage range compatibility, input bias current specification, and package form factor. Substitute parts are grouped into two primary categories:
Category 1: J-FET Amplifiers with Alternative Packaging Parts maintaining J-FET amplifier topology with 4 circuits but offering different package types (14-CERDIP through-hole or alternative surface mount configurations). These substitutes preserve the core J-FET input characteristics while accommodating different assembly or board layout requirements.
Category 2: General Purpose Amplifiers with Extended Performance Parts utilizing general purpose amplifier topology with 4 circuits, offering enhanced bandwidth, lower input offset voltage, or extended temperature ranges. These substitutes provide functional equivalence for applications where J-FET input characteristics are not mandatory and improved performance metrics are beneficial.
Substitution eligibility requires: (1) 4-circuit configuration, (2) supply voltage range encompassing the TL054IDR minimum 10V and maximum 30V, (3) Active product status, (4) ROHS3 compliance, and (5) compatible mounting technology for the target application.
Parameter Comparison
| Parameter | TL054IDR | 5962-9063301MCA | AD713AQ | AD713JNZ | 5962-88565023A | AD704ARZ-16 | AD704JRZ-16 |
|---|---|---|---|---|---|---|---|
| Manufacturer | Texas Instruments | Analog Devices Inc. | Analog Devices Inc. | Analog Devices Inc. | Analog Devices Inc. | Analog Devices Inc. | Analog Devices Inc. |
| Amplifier Type | J-FET | J-FET | J-FET | J-FET | General Purpose | General Purpose | General Purpose |
| Number of Circuits | 4 | 4 | 4 | 4 | 4 | 4 | 4 |
| Slew Rate (V/µs) | 17.8 | 20 | 20 | 20 | 8 | 0.1 | 0.1 |
| Gain Bandwidth Product (MHz) | 2.7 | 4 | 4 | 4 | 6.5 | 0.8 | 0.8 |
| Current - Input Bias (pA) | 30 | 10 | 10 | 10 | 7000 | 100 | 100 |
| Voltage - Input Offset (µV) | 560 | 300 | 300 | 300 | 250 | 50 | 50 |
| Current - Supply (mA) | 8.4 | 10 | 10 | 10 | 9.2 | 1.5 | 1.5 |
| Current - Output / Channel (mA) | 80 | 25 | 25 | 25 | — | 15 | 15 |
| Voltage - Supply Span Min (V) | 10 | 9 | 9 | 9 | 9 | 4 | 4 |
| Voltage - Supply Span Max (V) | 30 | 36 | 36 | 36 | 36 | 36 | 36 |
| Operating Temperature (°C) | -40 to 85 | -55 to 125 | -40 to 85 | 0 to 70 | -55 to 125 | -40 to 85 | 0 to 70 |
| Mounting Type | Surface Mount | Through Hole | Through Hole | Through Hole | Surface Mount | Surface Mount | Surface Mount |
| Package / Case | 14-SOIC | 14-CERDIP | 14-CERDIP | 14-DIP | 28-LCC | 16-SOIC | 16-SOIC |
| RoHS Status | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant |
| Product Status | Active | Active | Active | Active | Active | Active | Active |
Engineering Selection Recommendations
J-FET Amplifier Substitutes (Preferred for J-FET Input Requirements)
The 5962-9063301MCA and AD713AQ represent direct J-FET amplifier substitutes with 4-circuit configuration. Both devices maintain J-FET input topology with superior slew rate (20V/µs versus 17.8V/µs) and enhanced gain bandwidth product (4MHz versus 2.7MHz). The 5962-9063301MCA operates across -55°C to 125°C, extending the TL054IDR temperature range. The AD713AQ maintains the -40°C to 85°C operating range of the TL054IDR. Both parts are through-hole mounted (14-CERDIP or 14-DIP packages), requiring board layout modification from the surface mount TL054IDR. The AD713JNZ provides identical electrical performance to AD713AQ with 14-DIP packaging and 0°C to 70°C operating temperature.
General Purpose Amplifier Substitutes (For Extended Performance Applications)
The 5962-88565023A, AD704ARZ-16, and AD704JRZ-16 employ general purpose amplifier topology with 4 circuits. These devices offer significantly lower input offset voltage (50µV to 250µV versus 560µV) and reduced supply current (1.5mA to 9.2mA versus 8.4mA). The 5962-88565023A provides extended temperature range (-55°C to 125°C) and 6.5MHz gain bandwidth product. The AD704 variants (AD704ARZ-16 and AD704JRZ-16) operate at 0°C to 70°C or -40°C to 85°C with 800kHz bandwidth. These substitutes are suitable for applications where J-FET input characteristics are not required and improved offset voltage performance is beneficial.
Compliance and Availability
All substitute parts maintain ROHS3 compliance, MSL Level 1 (Unlimited), and Active product status. Inventory availability ranges from 695,927 units (AD704JRZ-16) to 1,026 units (5962-8777101M3A), ensuring supply chain continuity.
Frequently Asked Questions (FAQ)
Q: Can the TL054IDR be directly replaced with the AD704ARZ-16 in a surface mount application?
A: Both devices are surface mount with 4-circuit configuration and compatible supply voltage ranges (4V to 36V encompasses the TL054IDR 10V to 30V requirement). However, the AD704ARZ-16 uses a 16-SOIC package versus the TL054IDR 14-SOIC package, requiring PCB footprint modification. The AD704 is a general purpose amplifier, not J-FET input, resulting in different input bias current (100pA versus 30pA) and input offset voltage (50µV versus 560µV) characteristics.
Q: What is the primary difference between J-FET and general purpose amplifier substitutes?
A: J-FET amplifiers (5962-9063301MCA, AD713AQ, AD713JNZ) maintain the low input bias current characteristic (10pA) of the TL054IDR, suitable for high-impedance source applications. General purpose amplifiers (AD704 series, 5962-88565023A) feature higher input bias current (100pA to 7nA) but offer lower input offset voltage and reduced supply current, appropriate for applications prioritizing offset voltage performance over input bias current.
Q: Is the 5962-9063301MCA suitable for the full TL054IDR operating temperature range?
A: The 5962-9063301MCA extends the operating temperature range to -55°C to 125°C, exceeding the TL054IDR specification of -40°C to 85°C. This substitute is suitable for applications requiring the TL054IDR temperature range and provides additional margin for extended temperature operation.
Q: What packaging considerations apply when substituting the TL054IDR?
A: The TL054IDR is surface mount (14-SOIC). J-FET substitutes 5962-9063301MCA and AD713AQ are through-hole mounted (14-CERDIP), requiring board redesign. The AD713JNZ is through-hole 14-DIP. General purpose substitutes AD704ARZ-16 and AD704JRZ-16 are surface mount but use 16-SOIC packages, requiring footprint modification. The 5962-88565023A is surface mount 28-LCC, also requiring footprint change.
Q: Are all substitute parts ROHS3 compliant?
A: Yes. All substitute parts listed (5962-9063301MCA, 5962-88565023A, AD713AQ, AD713JNZ, AD704ARZ-16, AD704JRZ-16) maintain ROHS3 compliance and MSL Level 1 (Unlimited) moisture sensitivity rating, matching the TL054IDR environmental specifications.
Q: Which substitute provides the closest electrical performance match to the TL054IDR?
A: The AD713AQ and 5962-9063301MCA provide the closest J-FET amplifier match with 4-circuit configuration, 20V/µs slew rate, and 4MHz gain bandwidth product. Both maintain low input bias current (10pA) characteristic of J-FET input stages. The primary trade-off is packaging: both are through-hole mounted versus the TL054IDR surface mount configuration.
Q: Can the TL054IDR be substituted with the 5962-88565023A in a high-impedance source application?
A: The 5962-88565023A is a general purpose amplifier with 7nA input bias current, significantly higher than the TL054IDR 30pA specification. This substitute is not recommended for high-impedance source applications where input bias current must remain below 100pA. J-FET substitutes (AD713AQ, 5962-9063301MCA) maintain the low input bias current requirement.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts