TL032CDE4 Equivalent & Substitute Parts

Part Overview

The TL032CDE4 is a J-FET input operational amplifier manufactured by Texas Instruments, configured as a dual-channel (2 circuit) device in 8-SOIC surface mount packaging. This device is classified as Last Time Buy, indicating discontinued production with limited inventory availability. The TL032CDE4 serves applications requiring low input bias current and low input offset voltage characteristics typical of J-FET amplifier designs. Due to its Last Time Buy status, equivalent and substitute parts are necessary for ongoing design support and production continuity.

Key Parameters

Parameter	Value	Unit
Amplifier Type	J-FET	—
Number of Circuits	2	—
Slew Rate	5.1	V/µs
Gain Bandwidth Product	1.1	MHz
Current - Input Bias	2	pA
Voltage - Input Offset	570	µV
Current - Supply (x2 Channels)	422	µA
Current - Output / Channel	40	mA
Voltage - Supply Span (Min)	10	V
Voltage - Supply Span (Max)	30	V
Operating Temperature	0 to 70	°C
Package / Case	8-SOIC (0.154", 3.90mm Width)	—
Mounting Type	Surface Mount	—
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitution of the TL032CDE4 is determined by strict alignment of electrical and mechanical parameters within the J-FET amplifier category. The following criteria establish valid substitution relationships:

Primary Substitution Criteria:

Amplifier Type: J-FET (required for input bias current and offset voltage characteristics)
Number of Circuits: 2 (dual-channel configuration)
Package / Case: 8-SOIC form factor (mechanical and thermal compatibility)
Mounting Type: Surface Mount (assembly process compatibility)
Voltage - Supply Span: Minimum 10 V, Maximum 30 V (power supply compatibility)
Current - Output / Channel: 40 mA (load driving capability)

Substitution Groups:

Group 1: Texas Instruments TL032 Series (Direct Equivalents) Parts TL032CD and TL032CDR are direct electrical equivalents with identical specifications. Differentiation is based on packaging format (Tube vs. Tape & Reel) and product status (Last Time Buy vs. Active).

Group 2: STMicroelectronics J-FET Amplifiers (LF253/LF353 Series) Parts LF253DT and LF353DT are J-FET amplifiers with enhanced performance parameters (higher slew rate, higher gain bandwidth product, lower input bias current). These parts operate within the same 8-SOIC package and support the same supply voltage range with extended temperature operating range.

Group 3: General Purpose and Audio Amplifiers (Alternative Topologies) Parts LM258ADT, LM258AYDT, LM2904AYDT, and LM833DT represent alternative amplifier topologies (General Purpose and Audio) with different input bias current characteristics and supply current profiles. These parts maintain 8-SOIC packaging and dual-channel configuration but operate with different electrical performance envelopes.

Group 4: Analog Devices J-FET Amplifier (LT1457 Series) Parts LT1457S8 and LT1457S8#PBF are J-FET amplifiers from Analog Devices with comparable input bias current and offset voltage specifications, packaged in 8-SOIC format with extended temperature range.

Parameter Comparison

Part Number	Manufacturer	Amplifier Type	Slew Rate (V/µs)	GBW (MHz)	Input Bias (pA)	Input Offset (µV)	Supply Current (µA)	Temp Range (°C)	Product Status
TL032CDE4	Texas Instruments	J-FET	5.1	1.1	2	570	422	0 to 70	Last Time Buy
TL032CD	Texas Instruments	J-FET	5.1	1.1	2	570	422	0 to 70	Last Time Buy
TL032CDR	Texas Instruments	J-FET	5.1	1.1	2	570	422	0 to 70	Active
LF253DT	STMicroelectronics	J-FET	16	4	20	3000	1400	-40 to 105	Active
LF353DT	STMicroelectronics	J-FET	16	4	20	3000	1400	0 to 70	Active
LM258ADT	STMicroelectronics	General Purpose	0.6	1.1	20000	1000	700	-40 to 105	Active
LM258AYDT	STMicroelectronics	General Purpose	0.6	1.1	20000	1000	700	-40 to 105	Active
LM2904AYDT	STMicroelectronics	General Purpose	0.6	1.1	20000	1000	700	-40 to 125	Active
LM833DT	STMicroelectronics	Audio	7	15	300000	300	4000	-40 to 105	Active
LT1457S8	Analog Devices Inc.	J-FET	4	1.7	7	220	1800	-40 to 85	Active
LT1457S8#PBF	Analog Devices Inc.	J-FET	4	1.7	7	220	1800	-40 to 85	Active

Engineering Selection Recommendations

For Direct Replacement (Identical Electrical Performance):

TL032CDR is the primary recommended substitute for TL032CDE4. Both parts are manufactured by Texas Instruments with identical electrical specifications (5.1 V/µs slew rate, 1.1 MHz gain bandwidth product, 2 pA input bias current, 570 µV input offset voltage). TL032CDR maintains Active product status, ensuring long-term availability and supply chain continuity. The packaging difference (Tape & Reel vs. Tube) does not affect electrical performance and accommodates automated assembly processes. Both parts are ROHS3 Compliant with MSL 1 rating.

For Enhanced Performance with J-FET Topology:

LF353DT provides improved performance characteristics while maintaining J-FET input stage topology. This part offers 16 V/µs slew rate (3.1× faster than TL032CDE4), 4 MHz gain bandwidth product (3.6× higher), and operates across 0°C to 70°C temperature range matching the original specification. Input bias current increases to 20 pA and input offset voltage to 3 mV, representing acceptable trade-offs for higher bandwidth applications. LF353DT is Active status with ROHS3 compliance.

LF253DT extends operating temperature to -40°C to 105°C with identical performance to LF353DT, suitable for extended temperature applications.

For General Purpose Applications with Lower Supply Current:

LM258ADT and LM2904AYDT are General Purpose amplifiers with significantly lower supply current (700 µA vs. 422 µA for TL032CDE4). These parts sacrifice J-FET input stage characteristics (input bias current increases to 20 nA, input offset voltage to 1 mV) but maintain 1.1 MHz gain bandwidth product and 40 mA output current. Both parts are Active status with AEC-Q100 automotive qualification and ROHS3 compliance. LM2904AYDT extends operating temperature to -40°C to 125°C.

For Audio and High-Bandwidth Applications:

LM833DT is an Audio amplifier with 15 MHz gain bandwidth product and 7 V/µs slew rate, suitable for audio signal processing requiring higher bandwidth. This part operates at 4 mA supply current with 300 nA input bias current and 300 µV input offset voltage. Active status with ROHS3 compliance.

Compliance and Regulatory Considerations:

All recommended substitute parts maintain ROHS3 compliance and MSL 1 (Unlimited) moisture sensitivity rating, ensuring compatibility with standard manufacturing and storage protocols. All parts are classified under ECCN EAR99 and HTSUS 8542.33.0001, maintaining consistent regulatory classification with the original TL032CDE4.

Frequently Asked Questions (FAQ)

Q1: Can TL032CD be used as a direct replacement for TL032CDE4?

A: Yes. TL032CD is electrically identical to TL032CDE4 with matching specifications across all key parameters (slew rate, gain bandwidth product, input bias current, input offset voltage, supply voltage range, and output current). The only difference is packaging format (Tube vs. Tube). Both are Last Time Buy status. Verify packaging compatibility with your assembly process before implementation.

Q2: What is the primary advantage of TL032CDR over TL032CDE4?

A: TL032CDR is electrically identical to TL032CDE4 but maintains Active product status, ensuring continued availability and supply chain support. The packaging format is Tape & Reel (TR), which is standard for automated assembly processes. This part is recommended for new designs and production continuity planning.

Q3: Why do LF253DT and LF353DT have higher input bias current than TL032CDE4?

A: LF253DT and LF353DT are enhanced J-FET amplifiers with higher bandwidth (4 MHz vs. 1.1 MHz) and faster slew rate (16 V/µs vs. 5.1 V/µs). The input bias current specification increases from 2 pA to 20 pA as a result of the enhanced design. This remains within acceptable J-FET input stage performance and is suitable for applications prioritizing bandwidth over ultra-low input bias current.

Q4: Can LM258ADT replace TL032CDE4 in all applications?

A: LM258ADT is not a direct replacement. While both are dual-channel amplifiers in 8-SOIC packaging with 1.1 MHz gain bandwidth product and 40 mA output current, LM258ADT uses General Purpose topology rather than J-FET input stage. Input bias current increases from 2 pA to 20 nA, and input offset voltage increases from 570 µV to 1 mV. LM258ADT is suitable only for applications where these electrical differences are acceptable. Verify circuit performance before implementation.

Q5: What is the temperature operating range difference between TL032CDE4 and substitute parts?

A: TL032CDE4 operates 0°C to 70°C. LF353DT matches this range. LF253DT extends to -40°C to 105°C. LM258ADT, LM258AYDT, and LM833DT extend to -40°C to 105°C. LM2904AYDT extends to -40°C to 125°C. LT1457S8 series operates -40°C to 85°C. Select substitute parts based on your application's temperature requirements.

Q6: Are all substitute parts ROHS3 compliant?

A: Yes. All substitute parts listed are ROHS3 Compliant with MSL 1 (Unlimited) moisture sensitivity rating, matching the compliance profile of TL032CDE4. All parts are classified ECCN EAR99 and HTSUS 8542.33.0001.

Q7: What packaging formats are available for TL032 series substitutes?

A: TL032CD is available in Tube packaging. TL032CDR is available in Tape & Reel (TR) format. Both maintain 8-SOIC (0.154", 3.90mm Width) form factor. Tape & Reel packaging is standard for automated assembly; Tube packaging is used for manual assembly or lower-volume applications.

Q8: Which substitute part offers the best performance upgrade while maintaining J-FET characteristics?

A: LF353DT provides the best performance upgrade with J-FET input stage topology. It offers 3.1× faster slew rate (16 V/µs), 3.6× higher gain bandwidth product (4 MHz), and maintains 40 mA output current capability. Operating temperature range matches TL032CDE4 (0°C to 70°C). Input bias current increases to 20 pA and input offset voltage to 3 mV, representing acceptable trade-offs for bandwidth-critical applications.

Q9: Can LT1457S8 be used as a J-FET alternative with extended temperature range?

A: Yes. LT1457S8 is a J-FET amplifier from Analog Devices with 7 pA input bias current and 220 µV input offset voltage, both superior to TL032CDE4. It operates -40°C to 85°C with 4 V/µs slew rate and 1.7 MHz gain bandwidth product. Supply current is 1.8 mA (higher than TL032CDE4's 422 µA). This part is suitable for applications requiring extended temperature range and improved input stage performance.

Q10: What is the supply current difference between TL032CDE4 and substitute parts?

A: TL032CDE4 draws 422 µA (x2 Channels). LM258ADT and LM2904AYDT draw 700 µA, representing 66% higher consumption. LF253DT and LF353DT draw 1.4 mA, representing 3.3× higher consumption. LT1457S8 draws 1.8 mA. LM833DT draws 4 mA. Select substitute parts based on power budget requirements for battery-powered or thermally constrained applications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message