Taoglas TL.01.1F11 RF Antenna Equivalent & Substitute Parts

Part Overview

The Taoglas TL.01.1F11 is a multi-band dome RF antenna designed for cellular, navigation, and WiFi applications. This component operates across five frequency bands (749MHz, 892MHz, 1.5GHz, 1.9GHz, 2.6GHz) with an N Type Male panel mount termination. The product is currently classified as obsolete, making identification of compatible substitute parts essential for ongoing system support and component procurement.

Substiute Parts

TL.01.1F11

Taoglas LimitedIn Stock: 737TL.01.1F11 Datasheet

Current PartRFQ

TL.10.1HH11

Taoglas LimitedIn Stock: 1339TL.10.1HH11 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TL.01.1F11 is determined by the following critical parameters:

Frequency Coverage: The substitute must support the same frequency ranges across all five bands (698MHz ~ 800MHz, 824MHz ~ 960MHz, 1.575GHz, 1.71GHz ~ 2.17GHz, 2.4GHz ~ 2.7GHz).

Antenna Form Factor: Both the main part and substitute must be dome-type RF antennas to maintain equivalent mechanical and electrical performance characteristics.

RF Family Compatibility: The substitute must support the same RF standards (Cellular, Navigation, WiFi) and applications (CDMA, GPS, GSM, LTE, UMTS, WLAN).

Connector Type and Mounting: While the TL.01.1F11 uses N Type Male panel mount, substitute parts may employ alternative connector types (such as NMO Male) with different mounting methods (such as base mount), provided the electrical and frequency characteristics remain compatible.

Environmental Rating: The substitute must maintain equivalent or superior ingress protection (IP69K minimum).

Compliance Standards: Both parts must meet ROHS3 compliance and REACH unaffected status.

Parameter Comparison

Engineering Selection Recommendations

The TL.10.1HH11 serves as a direct substitute for the obsolete TL.01.1F11 based on the following engineering criteria:

Frequency Compatibility: Both parts operate across identical frequency ranges (698MHz ~ 800MHz, 824MHz ~ 960MHz, 1.575GHz, 1.71GHz ~ 2.17GHz, 2.4GHz ~ 2.7GHz), ensuring equivalent RF performance across all supported bands.

Product Status: The TL.10.1HH11 maintains active product status, ensuring ongoing availability and manufacturer support, whereas the TL.01.1F11 is obsolete.

Regulatory Compliance: Both components meet ROHS3 compliance and REACH unaffected requirements, maintaining equivalent environmental and regulatory standing.

Connector and Mounting Differences: The primary distinction lies in termination type (N Type Male vs. NMO Male) and mounting method (Panel Mount vs. Base Mount). System integration must account for these mechanical differences during component substitution.

Environmental Protection: The TL.10.1HH11 provides equivalent or superior ingress protection (IP67, IP69K) compared to the TL.01.1F11 (IP69K).

Frequently Asked Questions (FAQ)

Q: Can the TL.10.1HH11 directly replace the TL.01.1F11 without modification?

A: Electrical and RF performance are compatible. However, the connector type differs (N Type Male vs. NMO Male) and mounting method differs (Panel Mount vs. Base Mount), requiring mechanical integration assessment and potential adapter or mounting hardware changes.

Q: Are the frequency bands identical between these two parts?

A: Yes. Both parts operate across the same frequency ranges: 698MHz ~ 800MHz, 824MHz ~ 960MHz, 1.575GHz, 1.71GHz ~ 2.17GHz, and 2.4GHz ~ 2.7GHz.

Q: What is the significance of the TL.10.1HH11 having 8 bands versus the TL.01.1F11 having 5 bands?

A: The band count reflects the number of discrete frequency center points specified. Both parts cover the same overall frequency ranges required for CDMA, GPS, GSM, LTE, UMTS, and WLAN applications.

Q: Does the height difference (3.446" vs. 3.343") affect compatibility?

A: The TL.10.1HH11 is slightly shorter. Physical space constraints in the application must be evaluated to confirm the reduced height is acceptable.

Q: Are both parts compliant with current regulatory standards?

A: Yes. Both the TL.01.1F11 and TL.10.1HH11 are ROHS3 compliant and REACH unaffected.

Q: What is the difference between IP67 and IP69K ingress protection ratings?

A: Both ratings provide high-level environmental protection. IP69K offers enhanced protection against high-pressure water jets, while IP67 provides protection against temporary immersion. The TL.10.1HH11 supports both ratings.