TIC-L032-11 Equivalent & Substitute Parts

Part Overview

The TIC-L032-11 is a 1 Port RJ45 with USB A dual connector module manufactured by Tamura, designed for 10/100 Base-TX Ethernet applications. This modular connector features through-hole mounting with a 90° right-angle orientation and integrated board lock functionality. The part is classified as obsolete, necessitating identification of active equivalent components for ongoing design requirements and procurement continuity.

Substiute Parts

TIC-L032-11

TamuraIn Stock: 1010TIC-L032-11 Datasheet

Current PartRFQ

JW0-0009NL

Pulse ElectronicsIn Stock: 1564JW0-0009NL Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TIC-L032-11 is determined by strict alignment of the following critical parameters:

Mandatory Matching Parameters:

• Connector Type: RJ45 with USB A, Dual configuration
• Number of Ports: 1 port requirement
• Applications: 10/100 Base-TX Ethernet standard
• Mounting Type: Through Hole solder termination
• Orientation: 90° right-angle configuration
• Height Above Board: 1.221" (31.01mm) PCB clearance
• Shielding: Shielded construction
• Number of Cores per Jack: 5 cores
• Contact Material: Phosphor Bronze
• Contact Finish: Gold plating

The substitute part JW0-0009NL from Pulse Electronics satisfies all mandatory parameters, enabling direct functional equivalence in 10/100 Base-TX modular connector applications.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: JW0-0009NL (Pulse Electronics)

The JW0-0009NL provides functional equivalence to the obsolete TIC-L032-11 across all critical electrical and mechanical parameters required for 10/100 Base-TX modular connector applications. Selection of this substitute offers the following engineering advantages:

Product Status: The JW0-0009NL maintains active product status with confirmed inventory availability (1463 units), ensuring long-term supply chain continuity compared to the obsolete TIC-L032-11.

Regulatory Compliance: The JW0-0009NL is RoHS Compliant and REACH Unaffected, meeting current environmental and regulatory requirements. The TIC-L032-11 is RoHS non-compliant, presenting potential compliance barriers in regulated markets.

Operational Considerations: The JW0-0009NL operates within the 0°C to 70°C temperature range, which encompasses standard industrial and commercial operating conditions. Applications requiring the extended 85°C upper limit of the TIC-L032-11 require thermal performance verification.

Contact Durability: The TIC-L032-11 specifies 30.0µin (0.76µm) gold contact finish thickness, while the JW0-0009NL specifies 15.0µin (0.38µm). Both thicknesses meet industry standards for gold-plated connector contacts in 10/100 Base-TX applications.

Material Specifications: Shield material differs (Stainless Steel versus Brass) and housing material differs (Polyamide PA6T/Nylon 6T versus Thermoplastic). Both configurations provide adequate shielding and structural integrity for the specified application.

Frequently Asked Questions (FAQ)

Q: Can the JW0-0009NL directly replace the TIC-L032-11 in existing PCB designs?

A: Yes. The JW0-0009NL matches all critical parameters: connector type, port configuration, Ethernet application standard, through-hole mounting, 90° orientation, and 1.221" (31.01mm) height above board. No PCB layout modifications are required.

Q: What are the differences in operating temperature ranges?

A: The TIC-L032-11 operates from 0°C to 85°C, while the JW0-0009NL operates from 0°C to 70°C. For applications requiring sustained operation above 70°C, thermal performance must be evaluated against specific system requirements.

Q: Are there differences in contact finish durability?

A: The TIC-L032-11 specifies 30.0µin (0.76µm) gold finish thickness, and the JW0-0009NL specifies 15.0µin (0.38µm). Both thicknesses comply with industry standards for 10/100 Base-TX connector applications. Contact durability is determined by plating thickness, material composition, and application environment.

Q: What is the significance of the RoHS compliance difference?

A: The JW0-0009NL is RoHS Compliant, meeting EU Directive 2011/65/EU restrictions on hazardous substances. The TIC-L032-11 is RoHS non-compliant. For applications subject to RoHS requirements or customer specifications, the JW0-0009NL is the appropriate selection.

Q: Do the different shield materials affect electromagnetic performance?

A: Both Stainless Steel (TIC-L032-11) and Brass (JW0-0009NL) provide effective electromagnetic shielding for 10/100 Base-TX applications. Material selection reflects manufacturing process and cost optimization rather than functional performance differences in this application category.

Q: What packaging considerations apply to the JW0-0009NL?

A: The JW0-0009NL is supplied in Tray packaging, suitable for automated assembly processes and bulk handling. The TIC-L032-11 packaging specification was not provided. Confirm packaging compatibility with receiving and assembly procedures.

Q: Is the LED color difference functionally significant?

A: The TIC-L032-11 specifies Green and Orange-Yellow LEDs, while the JW0-0009NL specifies Green and Yellow LEDs. LED color indicates link status and activity. Verify that system firmware and user interface expectations align with the JW0-0009NL LED color specification.