TIC-L024-24 Equivalent & Substitute Parts

Part Overview

The Tamura TIC-L024-24 is an 8-port RJ45 modular connector jack designed for 10/100 Base-TX Ethernet applications with AutoMDIX support. This connector features through-hole solder termination, 90° right-angle orientation, and shielding with EMI finger protection. The product is classified as obsolete, necessitating identification of active equivalent alternatives that maintain functional and mechanical compatibility for new designs and production continuity.

Substiute Parts

TIC-L024-24

TamuraIn Stock: 968TIC-L024-24 Datasheet

Current PartRFQ

1-5569262-1

TE Connectivity AMP ConnectorsIn Stock: 8881-5569262-1 Datasheet

SimilarRFQ

1734715-2

TE Connectivity AMP ConnectorsIn Stock: 22581734715-2 Datasheet

SimilarRFQ

5569257-1

TE Connectivity AMP ConnectorsIn Stock: 8215569257-1 Datasheet

SimilarRFQ

5569262-1

TE Connectivity AMP ConnectorsIn Stock: 24675569262-1 Datasheet

SimilarRFQ

E6588-A59125-L

Pulse ElectronicsIn Stock: 1251E6588-A59125-L Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TIC-L024-24 is determined by strict alignment of the following core parameters:

Primary Substitution Criteria:

• Connector type: 8p8c RJ45 jack configuration
• Port count: 8 ports in 2-row arrangement
• Mounting: Through-hole solder termination
• Orientation: 90° right-angle
• Shielding: Shielded construction with EMI finger protection
• Contact material and finish: Phosphor bronze with gold plating
• Tab configuration: Up and down tab direction
• Moisture sensitivity: MSL 1 (Unlimited)

Secondary Compatibility Factors:

• Operating temperature range (minimum -40°C to maximum 85°C acceptable)
• Ethernet category rating (Cat3, Cat5, or higher)
• RoHS compliance status (compliant alternatives preferred for new designs)
• Housing material composition (polyamide, polyester, or glass-filled variants)

All substitute parts listed maintain the eight-port, two-row through-hole configuration with right-angle orientation and shielded EMI finger design. Variations in contact finish thickness, housing material composition, and category rating represent acceptable engineering trade-offs within the modular connector jack product family.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitutes (Highest Compatibility):

The TE Connectivity parts 1-5569262-1, 5569257-1, and 5569262-1 provide the closest functional equivalence to the TIC-L024-24. All three maintain the 8-port, 2-row through-hole configuration with 90° right-angle orientation, shielded EMI finger design, and phosphor bronze gold-plated contacts. These parts are classified as active products with RoHS compliance, supporting regulatory requirements for new designs. Operating temperature ranges of -40°C to 85°C exceed the original specification minimum of 0°C, providing extended environmental capability. Cat5 Ethernet rating supports 10/100 Base-TX applications equivalent to the original design intent.

Secondary Substitute (Extended Temperature Consideration):

The TE Connectivity part 1734715-2 maintains full mechanical and electrical compatibility with the TIC-L024-24 but operates within a reduced temperature range of -40°C to 70°C. This part is suitable for applications where the upper operating temperature does not exceed 70°C. The Cat3 rating supports 10/100 Base-TX operation. ROHS3 compliance and active product status support modern design requirements.

Alternative Substitute (Single-Port Configuration):

The Pulse Electronics E6588-A59125-L provides equivalent electrical and mechanical characteristics but differs in port count, featuring a single RJ45 jack rather than eight ports. This part is applicable only when single-port modular connector requirements align with design specifications. Cat5 rating and RoHS compliance maintain compatibility with current standards.

Compliance Consideration:

All substitute parts are RoHS compliant, addressing regulatory requirements for new production. The original TIC-L024-24 is classified as RoHS non-compliant. Selection of compliant alternatives supports adherence to current environmental and safety standards.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 1-5569262-1 directly replace the Tamura TIC-L024-24 in existing designs?

A: Yes. The 1-5569262-1 maintains identical port count (8), row configuration (2), mounting type (through-hole), orientation (90° right-angle), termination method (solder), shielding design (shielded with EMI finger), contact material (phosphor bronze), contact finish (gold), and tab direction (up and down). Operating temperature range (-40°C to 85°C) exceeds the original specification. Cat5 Ethernet rating supports 10/100 Base-TX applications.

Q: What is the difference between the TE Connectivity 1-5569262-1 and 5569262-1 parts?

A: These parts share identical electrical and mechanical specifications, including 8-port configuration, Cat5 rating, and operating temperature range (-40°C to 85°C). The primary difference is packaging: 1-5569262-1 is supplied in tray packaging, while 5569262-1 is supplied in bulk packaging. Both are active products with RoHS compliance.

Q: Why does the Pulse Electronics E6588-A59125-L appear in the substitute list if it has only one port?

A: The E6588-A59125-L is listed as a substitute based on the provided input parameters but differs significantly in port count. This part is applicable only for single-port RJ45 jack requirements. For applications requiring eight-port configuration, this part is not suitable.

Q: Is the TE Connectivity 1734715-2 suitable for all applications requiring the TIC-L024-24?

A: The 1734715-2 maintains full mechanical and electrical compatibility with the TIC-L024-24 for applications operating within the temperature range of -40°C to 70°C. Applications requiring operation above 70°C require alternative selections such as 1-5569262-1, 5569257-1, or 5569262-1, which support -40°C to 85°C operation.

Q: What is the significance of contact finish thickness variation among substitute parts?

A: Contact finish thickness affects durability and wear resistance. The TIC-L024-24 specifies 30.0µin (0.76µm) gold plating. Substitute parts provide 15.0µin to 50.0µin thickness. Higher thickness values (50.0µin) provide extended contact life and improved corrosion resistance. The 1734715-2 with 15.0µin thickness represents the minimum specification among active alternatives.

Q: Are all substitute parts RoHS compliant?

A: Yes. All substitute parts listed (1-5569262-1, 1734715-2, 5569257-1, 5569262-1, and E6588-A59125-L) are RoHS compliant. The original TIC-L024-24 is classified as RoHS non-compliant. Selection of compliant alternatives supports regulatory requirements for new designs and production.

Q: What packaging options are available for the substitute parts?

A: TE Connectivity 1-5569262-1 is supplied in tray packaging. TE Connectivity 1734715-2 is supplied in tube packaging. TE Connectivity 5569257-1 is supplied in tray packaging. TE Connectivity 5569262-1 is supplied in bulk packaging. Pulse Electronics E6588-A59125-L is supplied in bulk packaging. Packaging selection depends on production volume and inventory management requirements.

Q: Do all substitute parts support 10/100 Base-TX Ethernet applications?

A: Yes. All substitute parts support Cat3 or Cat5 Ethernet ratings, which encompass 10/100 Base-TX operation. The 1734715-2 is rated Cat3, while 1-5569262-1, 5569257-1, 5569262-1, and E6588-A59125-L are rated Cat5. Both ratings support the original application requirements.