TIC216M-S TRIAC Equivalent & Substitute Parts

Part Overview

The TIC216M-S is a Logic - Sensitive Gate TRIAC manufactured by Bourns Inc., rated for 600 V off-state voltage and 6 A on-state current in a TO-220-3 through-hole package. This component is classified as obsolete product status. Due to its obsolete classification, equivalent substitute parts from active manufacturers are necessary for new designs and ongoing production requirements. Substitute parts must maintain electrical compatibility across voltage, current, gate trigger characteristics, and thermal operating ranges while accommodating the through-hole TO-220 package format.

Key Parameters

Parameter	TIC216M-S Value
Voltage - Off State	600 V
Current - On State (It (RMS)) (Max)	6 A
Voltage - Gate Trigger (Vgt) (Max)	2.2 V
Current - Gate Trigger (Igt) (Max)	5 mA
Current - Hold (Ih) (Max)	30 mA
Current - Non Rep. Surge 50, 60Hz (Itsm)	60 A @ 50Hz
Operating Temperature Range	-40°C ~ 110°C (TC)
Package / Case	TO-220-3
Mounting Type	Through Hole
Triac Type	Logic - Sensitive Gate
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution eligibility for the TIC216M-S is determined by the following critical parameters:

Mandatory Matching Criteria:

Voltage - Off State: 600 V (exact match required)
Package / Case: TO-220-3 (through-hole mounting)
Mounting Type: Through Hole
Configuration: Single

Functional Compatibility Criteria:

Current - On State (It (RMS)) (Max): 6 A or higher
Voltage - Gate Trigger (Vgt) (Max): Must not exceed 2.2 V for sensitive gate operation
Current - Gate Trigger (Igt) (Max): Must not exceed 5 mA for logic-level gate drive compatibility
Current - Hold (Ih) (Max): Must not exceed 30 mA
Current - Non Rep. Surge 50, 60Hz (Itsm): Must support 60 A minimum

Environmental Compatibility:

Operating Temperature Range: Must encompass or exceed -40°C ~ 110°C

Substitute parts are grouped by TRIAC type classification (Logic - Sensitive Gate, Standard, or Alternistor - Snubberless) and current rating. Parts with higher current ratings (8 A, 10 A, 12 A, 16 A) are electrically compatible as direct substitutes when gate trigger parameters remain within specification limits.

Parameter Comparison

Part Number	Manufacturer	Triac Type	Voltage - Off State	Current - On State (Max)	Voltage - Gate Trigger (Max)	Current - Gate Trigger (Max)	Current - Hold (Max)	Operating Temperature	Product Status
TIC216M-S	Bourns Inc.	Logic - Sensitive Gate	600 V	6 A	2.2 V	5 mA	30 mA	-40°C ~ 110°C	Obsolete
BTB06-600CRG	STMicroelectronics	Standard	600 V	6 A	1.3 V	25 mA	25 mA	-40°C ~ 125°C	Active
BTB06-600CWRG	STMicroelectronics	Alternistor - Snubberless	600 V	6 A	1.3 V	35 mA	35 mA	-40°C ~ 125°C	Active
BTB08-600CRG	STMicroelectronics	Standard	600 V	8 A	1.3 V	25 mA	25 mA	-40°C ~ 125°C	Active
BTB08-600CWRG	STMicroelectronics	Alternistor - Snubberless	600 V	8 A	1.3 V	35 mA	35 mA	-40°C ~ 125°C	Active
BTB12-600CRG	STMicroelectronics	Standard	600 V	12 A	1.3 V	25 mA	25 mA	-40°C ~ 125°C	Active
BTB12-600CWRG	STMicroelectronics	Alternistor - Snubberless	600 V	12 A	1.3 V	35 mA	35 mA	-40°C ~ 125°C	Active
BTB16-600CRG	STMicroelectronics	Standard	600 V	16 A	1.3 V	25 mA	25 mA	-40°C ~ 125°C	Active
BTB16-600CWRG	STMicroelectronics	Alternistor - Snubberless	600 V	16 A	1.3 V	35 mA	35 mA	-40°C ~ 125°C	Active
T1010H-6T	STMicroelectronics	Logic - Sensitive Gate	600 V	10 A	1 V	10 mA	25 mA	-40°C ~ 150°C	Active
T1035H-6T	STMicroelectronics	Alternistor - Snubberless	600 V	10 A	1 V	35 mA	35 mA	-40°C ~ 150°C	Active

Engineering Selection Recommendations

Primary Substitute - Direct Replacement: BTB06-600CRG and BTB06-600CWRG are the closest electrical equivalents, both rated for 600 V and 6 A with TO-220-3 packaging. Both are active products from STMicroelectronics with ROHS3 compliance and extended operating temperature ranges (-40°C ~ 125°C). BTB06-600CRG (Standard type) features lower gate trigger current (25 mA) compared to the original 5 mA specification but remains within acceptable logic-level gate drive parameters. BTB06-600CWRG (Alternistor - Snubberless) provides snubberless operation with 35 mA gate trigger current, suitable for applications requiring reduced EMI.

Higher Current Alternatives: BTB08-600CRG, BTB08-600CWRG, BTB12-600CRG, BTB12-600CWRG, BTB16-600CRG, and BTB16-600CWRG provide increased current ratings (8 A, 12 A, 16 A respectively) while maintaining 600 V voltage specification and TO-220-3 packaging. These are electrically compatible substitutes for applications where higher current capacity is required or beneficial for thermal margin.

Logic - Sensitive Gate Alternatives: T1010H-6T and T1035H-6T maintain the Logic - Sensitive Gate classification with improved gate trigger characteristics (1 V maximum Vgt, 10 mA or 35 mA Igt). T1010H-6T is rated for 10 A on-state current with extended operating temperature range (-40°C ~ 150°C). Both parts are active products with ROHS3 compliance and REACH unaffected status.

All substitute parts are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating, matching the original part's environmental compliance profile.

Frequently Asked Questions (FAQ)

Q: Can BTB06-600CRG directly replace TIC216M-S in existing designs? A: Yes. Both parts share identical 600 V voltage rating, 6 A current rating, and TO-220-3 package. Gate trigger voltage is lower (1.3 V vs. 2.2 V), which is compatible with logic-level gate drive circuits. Gate trigger current is higher (25 mA vs. 5 mA), requiring verification that gate drive circuitry can supply this current level.

Q: What is the difference between Standard and Alternistor - Snubberless TRIAC types? A: Standard TRIACs (BTB06-600CRG, BTB08-600CRG, BTB12-600CRG, BTB16-600CRG) require external snubber networks for EMI suppression in AC switching applications. Alternistor - Snubberless types (BTB06-600CWRG, BTB08-600CWRG, BTB12-600CWRG, BTB16-600CWRG) incorporate integrated snubber functionality, eliminating external component requirements and reducing board space.

Q: Are higher current-rated parts (8 A, 12 A, 16 A) suitable substitutes for a 6 A application? A: Yes. Higher current ratings provide electrical compatibility and thermal margin. The 600 V voltage specification, TO-220-3 package, and gate trigger characteristics remain compatible. Current rating represents maximum capability; actual circuit current draw is determined by application load, not component rating.

Q: What is the operating temperature difference between TIC216M-S and substitute parts? A: TIC216M-S operates from -40°C to 110°C (TC). All STMicroelectronics substitutes operate from -40°C to 125°C (TJ) or -40°C to 150°C (TJ for T1010H-6T and T1035H-6T), providing extended high-temperature capability.

Q: Does gate trigger current difference affect circuit design? A: Yes. TIC216M-S requires 5 mA maximum gate trigger current. BTB series parts require 25 mA (Standard) or 35 mA (Alternistor). Gate drive circuitry must supply sufficient current at the specified voltage level. T1010H-6T requires 10 mA, providing intermediate gate drive requirements.

Q: Are all substitute parts RoHS3 compliant? A: Yes. All listed substitute parts are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating, matching the original TIC216M-S environmental specifications.

Q: Can T1010H-6T or T1035H-6T be used as substitutes despite higher current ratings? A: Yes. Both maintain Logic - Sensitive Gate or Alternistor classification with 600 V voltage and TO-220-3 packaging. T1010H-6T is rated for 10 A and T1035H-6T for 10 A, providing higher current capacity while maintaining gate trigger compatibility. Extended operating temperature range (-40°C ~ 150°C) offers additional thermal margin.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message