THS6093ID Equivalent & Substitute Parts

Part Overview

The THS6093ID is a 2/0 Driver IC in 14-SOIC packaging manufactured by Texas Instruments. This interface component operates across 5V and 12V supply voltages with an operating temperature range of -40°C to 85°C. The product is classified as obsolete, making identification of active equivalent parts essential for new designs and ongoing system support. Substitute parts must maintain functional equivalence in driver configuration, electrical specifications, and compliance certifications while accommodating packaging and availability constraints.

Substiute Parts

THS6093ID

Texas InstrumentsIn Stock: 1028THS6093ID Datasheet

Current PartRFQ

THS6093IPWP

Texas InstrumentsIn Stock: 2397THS6093IPWP Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the THS6093ID is determined by the following critical parameters:

• Driver Configuration: 2/0 driver/receiver count must be maintained
• Supply Voltage Compatibility: 5V and 12V operation required
• Operating Temperature Range: -40°C to 85°C minimum specification
• Base Product Number: THS6093 series maintains functional equivalence
• Compliance Standards: ROHS3 compliance and REACH unaffected status required
• Mounting Type: Surface mount technology required
• Interface Category: Driver classification within interface components

The THS6093IPWP represents the active equivalent within the THS6093 product family, differing primarily in package form factor and product lifecycle status while maintaining all critical electrical and functional parameters.

Parameter Comparison

Engineering Selection Recommendations

The THS6093IPWP is the active substitute for the obsolete THS6093ID. Both components share identical electrical specifications, driver configuration, supply voltage range, and operating temperature parameters. The primary distinction is packaging: the THS6093IPWP uses 14-PowerTSSOP (0.173", 4.40mm Width) versus the 14-SOIC (0.154", 3.90mm Width) of the original part.

Both parts maintain ROHS3 compliance and REACH unaffected status, satisfying regulatory requirements. The THS6093IPWP carries active product status with standard commercial availability, whereas the THS6093ID is obsolete. The MSL rating difference (1 versus 2) reflects standard moisture sensitivity classifications for their respective package types and does not affect functional equivalence.

PCB layout modifications are required to accommodate the package width difference of 0.019" (0.48mm). Pin configuration and electrical functionality remain identical between the two parts.

Frequently Asked Questions (FAQ)

Q: Can the THS6093IPWP directly replace the THS6093ID without design changes?

A: Electrical and functional replacement is direct. PCB layout modification is required due to package width difference (14-SOIC versus 14-PowerTSSOP). Pin configuration and electrical specifications are identical.

Q: What is the significance of the MSL rating difference between these parts?

A: MSL 1 (Unlimited) for THS6093ID and MSL 2 (1 Year) for THS6093IPWP reflect moisture sensitivity classifications specific to their package types. Both are standard ratings for their respective packages and do not affect functional performance or substitution suitability.

Q: Why is the THS6093ID classified as obsolete?

A: Product lifecycle status reflects manufacturer discontinuation. The THS6093IPWP represents the active continuation within the THS6093 product family with identical electrical specifications.

Q: Are there any compliance or certification differences between these parts?

A: Both parts are ROHS3 compliant and REACH unaffected. Regulatory compliance is equivalent.

Q: What are the critical parameters for confirming substitution compatibility?

A: Driver configuration (2/0), supply voltage (5V, 12V), operating temperature range (-40°C to 85°C), and base product number (THS6093) must match. Package form factor differences require PCB layout evaluation.