THS6092IDR Equivalent & Substitute Parts

Part Overview

The THS6092IDR is a 2/0 Driver DSL interface IC manufactured by Texas Instruments in an 8-SOIC surface mount package. This component is classified as obsolete, making equivalent and substitute parts necessary for ongoing design support and production continuity. The part operates across a 5V to 14V supply range with an operating temperature span of -40°C to 85°C. Substitute parts must maintain functional compatibility within these electrical and mechanical constraints.

Substiute Parts

THS6092IDR

Texas InstrumentsIn Stock: 19185THS6092IDR Datasheet

Current PartRFQ

AD8012ARZ

Analog Devices Inc.In Stock: 1686AD8012ARZ Datasheet

MFR RecommendedRFQ

AD8012ARZ-REEL

Analog Devices Inc.In Stock: 2085AD8012ARZ-REEL Datasheet

MFR RecommendedRFQ

AD8012ARZ-REEL7

Analog Devices Inc.In Stock: 2263AD8012ARZ-REEL7 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the THS6092IDR are qualified based on the following critical parameters:

• Package Compatibility: 8-SOIC (0.154", 3.90mm Width) surface mount package
• Operating Temperature Range: -40°C to 85°C minimum
• Supply Voltage Range: Minimum 3V to 12V span to accommodate the original 5V to 14V specification
• Mounting Type: Surface Mount
• Compliance: ROHS3 Compliant, MSL 1 (Unlimited)

The substitute parts listed (AD8012ARZ, AD8012ARZ-REEL, AD8012ARZ-REEL7) are Analog Devices Inc. current feedback amplifiers with 2 circuits in an 8-SOIC package. These parts meet the mechanical and environmental requirements for direct substitution. Differences in packaging format (Tube, Tape & Reel, Cut Tape & Digi-Reel) do not affect electrical compatibility.

Parameter Comparison

Engineering Selection Recommendations

All three AD8012ARZ variants (standard, REEL, and REEL7) are active products from Analog Devices Inc. and are ROHS3 compliant with MSL 1 (Unlimited) ratings. These parts maintain identical electrical specifications and package geometry to support direct substitution in the THS6092IDR application.

Selection between the three variants depends on procurement and assembly requirements:

• AD8012ARZ (Tube): Standard packaging for lower-volume applications
• AD8012ARZ-REEL (Tape & Reel): Standard reel format for automated assembly
• AD8012ARZ-REEL7 (Cut Tape & Digi-Reel): Alternative reel format for specific assembly equipment compatibility

All variants are electrically and mechanically interchangeable. The choice between packaging formats does not affect circuit performance or reliability.

Frequently Asked Questions (FAQ)

Q: Can AD8012ARZ parts directly replace THS6092IDR in existing designs?

A: Yes. The AD8012ARZ family maintains identical package geometry (8-SOIC), operating temperature range (-40°C to 85°C), and supply voltage compatibility (3V to 12V span covers the original 5V to 14V specification). Both are ROHS3 compliant with MSL 1 ratings.

Q: What is the difference between AD8012ARZ, AD8012ARZ-REEL, and AD8012ARZ-REEL7?

A: These part numbers differ only in packaging format: Tube, Tape & Reel (TR), and Cut Tape & Digi-Reel respectively. Electrical specifications and pin configuration are identical. Selection is based on procurement and assembly line requirements.

Q: Are there any supply voltage limitations when substituting?

A: The AD8012ARZ variants support a 3V to 12V supply span, while the original THS6092IDR operates at 5V to 14V. Applications requiring operation above 12V are outside the substitute part specification and require alternative solutions.

Q: Do all substitute parts meet the same compliance standards?

A: Yes. All AD8012ARZ variants are ROHS3 compliant, REACH unaffected, and carry MSL 1 (Unlimited) ratings, matching the original THS6092IDR compliance profile.

Q: Is pin-to-pin compatibility guaranteed?

A: Both the THS6092IDR and AD8012ARZ family use the 8-SOIC package with identical pin spacing (0.154", 3.90mm width). Pin configuration must be verified against specific application schematics to ensure functional compatibility.