THCV216 Equivalent & Substitute Parts Reference

Part Overview

The THCV216 is a dual-channel deserializer interface circuit manufactured by THine Solutions, Inc. This component converts V-by-One®HS serial input signals to LVDS parallel output signals at 3.75Gbps data rate. The device is housed in a 64-TSSOP surface mount package and operates across 1.8V and 3.3V supply voltage rails within the 0°C to 70°C temperature range.

The THCV216 maintains Active product status with full RoHS3 compliance and REACH unaffected classification. Identifying equivalent substitute parts is essential for supply chain continuity, inventory optimization, and design flexibility when the primary part number becomes unavailable or when alternative sourcing is required.

Substiute Parts

THCV216

THine Solutions, Inc.In Stock: 15693THCV216 Datasheet

Current PartRFQ

THCV216-B

THine Solutions, Inc.In Stock: 2073THCV216-B Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the THCV216 deserializer is determined by strict equivalence across the following critical parameters:

Functional Equivalence: The substitute part must perform the identical deserializer function, converting V-by-One®HS serial inputs to LVDS parallel outputs.

Signal Integrity Parameters: Data rate (3.75Gbps), input type (V-by-One®HS), output type (LVDS), number of inputs (2), and number of outputs (42) must remain unchanged.

Electrical Compatibility: Supply voltage options (1.8V, 3.3V) and operating temperature range (0°C ~ 70°C) must be identical or broader.

Physical Compatibility: Package type (64-TFSOP), case dimensions (0.240", 6.10mm Width), and mounting method (Surface Mount) must be identical to ensure PCB layout compatibility.

Regulatory Compliance: RoHS3 compliance and REACH unaffected status must be maintained.

The THCV216-B meets all substitution criteria as a parametric equivalent part.

Parameter Comparison

Engineering Selection Recommendations

The THCV216-B is a direct parametric equivalent to the THCV216 and qualifies as a substitute part for applications requiring dual-channel V-by-One®HS to LVDS deserialization at 3.75Gbps.

Both parts maintain Active product status, ensuring continued manufacturer support and availability. Both parts carry RoHS3 compliance certification and REACH unaffected status, meeting regulatory requirements for commercial and industrial applications.

Selection between THCV216 and THCV216-B should be based on inventory availability and supply chain considerations. The THCV216 currently maintains higher inventory levels (15,628 pcs) compared to THCV216-B (2,036 pcs). For applications with extended lead time requirements or volume commitments, either part number is electrically and mechanically interchangeable.

No design modifications, PCB layout changes, or firmware updates are required when substituting between these part numbers.

Frequently Asked Questions (FAQ)

Q: Can THCV216-B be used as a direct replacement for THCV216 without PCB modifications?

A: Yes. The THCV216-B is a parametric equivalent with identical package dimensions (64-TFSOP, 0.240" × 6.10mm), pin count, and electrical specifications. No PCB layout changes are required.

Q: Are the signal integrity characteristics identical between THCV216 and THCV216-B?

A: Yes. Both parts operate at 3.75Gbps data rate with identical V-by-One®HS input and LVDS output specifications. Signal timing and integrity parameters are equivalent.

Q: Do both parts support the same supply voltage range?

A: Yes. Both THCV216 and THCV216-B operate with 1.8V and 3.3V supply voltage options and maintain identical operating temperature specifications (0°C ~ 70°C).

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts carry identical RoHS3 compliance, REACH unaffected status, and MSL 3 moisture sensitivity ratings. Regulatory requirements are fully met by either part number.

Q: Which part should be selected for new designs?

A: Either part number is suitable for new designs. Selection should be based on current inventory availability and supply chain lead times. Both parts maintain Active product status with equivalent long-term availability.

Q: Is the 64-TSSOP package identical to 64-TFSOP?

A: The supplier device package designation is 64-TSSOP for both parts. The package case specification is 64-TFSOP with 0.240" width and 6.10mm dimensions. These designations refer to the same physical package used for surface mount assembly.