THAS322M050AD1C Equivalent & Substitute Parts

Part Overview

The THAS322M050AD1C is a 3200 µF, 50 V aluminum electrolytic capacitor manufactured by Cornell Dubilier Electronics (CDE) in FlatPack configuration. This component is designed for general-purpose applications requiring high capacitance density with through-hole mounting. The part is currently Active in product status with 626 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters are required due to inventory constraints, supply chain considerations, or design flexibility within the same product series.

Substiute Parts

THAS322M050AD1C

Cornell Dubilier Electronics (CDE)In Stock: 736THAS322M050AD1C Datasheet

Current PartRFQ

THAS322M050AD0C

Cornell Dubilier Electronics (CDE)In Stock: 1234THAS322M050AD0C Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the THAS322M050AD1C is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Capacitance: 3200 µF (exact match required)
• Voltage Rating: 50 V (exact match required)
• Tolerance: ±20% (exact match required)
• ESR @ 120 Hz: 50 mOhm (exact match required)
• Lifetime @ 105°C: 5000 Hrs (exact match required)
• Operating Temperature Range: -55°C to 105°C (exact match required)
• Ripple Current @ 120 Hz: 2.9 A (exact match required)
• Ripple Current @ 20 kHz: 3.48 A (exact match required)

Mechanical Parameters:

• Package / Case: FlatPack (exact match required)
• Mounting Type: Through Hole (exact match required)
• Lead Spacing: 10.00 mm (exact match required)

Compliance Parameters:

• RoHS Status: ROHS3 Compliant (exact match required)
• Series: THAS (same product family)

Only parts meeting all specified parameters are classified as direct substitutes.

Parameter Comparison

Engineering Selection Recommendations

THAS322M050AD0C is a direct parametric equivalent to THAS322M050AD1C. Both parts are manufactured by Cornell Dubilier Electronics within the THAS series and maintain identical electrical and mechanical specifications. Both parts are Active in product status and ROHS3 compliant. The THAS322M050AD0C offers higher inventory availability (1158 units in stock versus 626 units for the primary part), making it suitable for applications where supply continuity is a consideration. Selection between these parts should be based on procurement lead time, inventory requirements, and design documentation flexibility. No electrical or mechanical performance differences exist between the two part numbers.

Frequently Asked Questions (FAQ)

Q: Can THAS322M050AD0C be used as a direct replacement for THAS322M050AD1C?

A: Yes. Both parts are parametrically identical across all electrical and mechanical specifications, including capacitance, voltage rating, ESR, ripple current ratings, package configuration, and lead spacing. Both are ROHS3 compliant and Active in product status.

Q: Are there any differences in physical dimensions between these parts?

A: No. Both parts share identical FlatPack dimensions: 66.50 mm length × 25.40 mm width × 9.30 mm maximum seated height, with 10.00 mm lead spacing for through-hole mounting.

Q: Do both parts have the same thermal and operational characteristics?

A: Yes. Both parts operate across -55°C to 105°C, maintain 5000 hours lifetime at 105°C, and deliver identical ripple current performance at 120 Hz (2.9 A) and 20 kHz (3.48 A).

Q: What is the difference between the part numbers THAS322M050AD1C and THAS322M050AD0C?

A: The part numbers differ only in the suffix designation (1C versus 0C). This designation does not reflect electrical or mechanical parameter differences. Both parts are functionally equivalent within the THAS series.

Q: Can these parts be used interchangeably in PCB designs?

A: Yes. Identical lead spacing (10.00 mm), package type (FlatPack), and mounting method (through-hole) ensure direct PCB footprint compatibility without design modification.