TGL41-6.8-E3/96 Equivalent & Substitute Parts

Part Overview

The TGL41-6.8-E3/96 is a unidirectional Transient Voltage Suppressor (TVS) diode from Vishay General Semiconductor - Diodes Division, part of the TransZorb® series. This component is designed for general-purpose transient voltage suppression applications with a 5.5V reverse standoff voltage and 10.8V maximum clamping voltage. The device is currently listed as obsolete, making identification of suitable substitute parts essential for ongoing design support and production continuity.

Substiute Parts

TGL41-6.8-E3/96

Vishay General Semiconductor - Diodes DivisionIn Stock: 755TGL41-6.8-E3/96 Datasheet

Current PartRFQ

TGL41-6.8A-E3/96

Vishay General Semiconductor - Diodes DivisionIn Stock: 4157TGL41-6.8A-E3/96 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TGL41-6.8-E3/96 is determined by the following critical electrical and mechanical parameters:

• Unidirectional channel configuration (1 channel required)
• Reverse standoff voltage tolerance range (5.5V nominal)
• Breakdown voltage minimum specification (6.12V minimum)
• Clamping voltage at peak pulse current (10.8V maximum)
• Peak pulse current capability (37A minimum)
• Peak pulse power rating (400W minimum)
• Operating temperature range (-55°C to 150°C)
• Surface mount package compatibility (DO-213AB/MELF)
• RoHS3 compliance requirement

The TGL41-6.8A-E3/96 qualifies as a direct substitute based on these parameters, with minor variations in standoff voltage (5.8V vs 5.5V) and clamping voltage (10.5V vs 10.8V) that remain within acceptable substitution tolerances for general-purpose TVS applications.

Parameter Comparison

Engineering Selection Recommendations

The TGL41-6.8A-E3/96 is the recommended substitute for the obsolete TGL41-6.8-E3/96. This substitution is supported by:

• Identical manufacturer and TransZorb® series designation, ensuring design continuity
• Active product status with confirmed inventory availability (4100 pcs), providing supply chain reliability
• Full ROHS3 compliance and REACH unaffected status, maintaining regulatory alignment
• Identical operating temperature range and MSL rating
• Identical package and mounting specifications (DO-213AB/MELF, GL41)
• Equivalent electrical performance within the specified parameter ranges for general-purpose TVS applications
• Tape & Reel packaging format suitable for automated assembly processes

Frequently Asked Questions (FAQ)

Q: Can the TGL41-6.8A-E3/96 be used as a direct replacement for the TGL41-6.8-E3/96?

A: Yes. Both devices share identical unidirectional channel configuration, package type (DO-213AB/MELF), mounting method (surface mount), and operating temperature range. The electrical parameter variations (standoff voltage 5.8V vs 5.5V, clamping voltage 10.5V vs 10.8V, peak pulse current 38.1A vs 37A) are within acceptable tolerances for general-purpose TVS applications and do not require circuit redesign.

Q: What is the primary reason for substitution?

A: The TGL41-6.8-E3/96 is listed as obsolete. The TGL41-6.8A-E3/96 is an active product with established supply availability, ensuring long-term design support and production continuity.

Q: Are there any packaging differences between these parts?

A: The main part is supplied in bulk packaging, while the substitute is supplied in Tape & Reel (TR) format. Both use identical component packaging (GL41 DO-213AB/MELF), so no PCB layout or assembly modifications are required.

Q: Do both parts meet the same compliance standards?

A: Yes. Both the TGL41-6.8-E3/96 and TGL41-6.8A-E3/96 are ROHS3 compliant, REACH unaffected, and carry identical MSL ratings (1 - Unlimited), meeting the same regulatory and environmental requirements.

Q: What are the key electrical parameters that define substitution compatibility?

A: Substitution compatibility is determined by unidirectional channel count (1), reverse standoff voltage range (5.5V to 5.8V), breakdown voltage minimum (6.12V to 6.45V), clamping voltage maximum (10.5V to 10.8V), peak pulse current (37A to 38.1A), and peak pulse power rating (400W). All parameters must remain within the specified ranges for the application.