TG35C60 TRIAC 600V 35A Equivalent & Substitute Parts

Part Overview

The TG35C60 is a standard TRIAC thyristor manufactured by SanRex Corporation, rated for 600V off-state voltage and 35A on-state current in a chassis mount module configuration. This component is classified as Active product status with full RoHS compliance and unlimited moisture sensitivity rating. Substitute parts are identified when equivalent electrical and mechanical parameters are required for circuit design flexibility, inventory management, or component availability across manufacturing batches.

Key Parameters

Parameter	Value	Unit
Voltage - Off State	600	V
Current - On State (It (RMS)) (Max)	35	A
Voltage - Gate Trigger (Vgt) (Max)	3	V
Current - Non Rep. Surge 50Hz	300	A
Current - Non Rep. Surge 60Hz	330	A
Current - Gate Trigger (Igt) (Max)	50	mA
Current - Hold (Ih) (Max)	30	mA
Operating Temperature Range	-25 to 125	°C (TJ)
Mounting Type	Chassis Mount	-
Package Type	Module	-
RoHS Status	Compliant	-
Moisture Sensitivity Level	1 (Unlimited)	-

Substitute Part Grouping Explanation

Substitution of the TG35C60 TRIAC is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part TG35E60 shares identical specifications in the following key areas:

Off-state voltage rating: 600V
On-state current rating: 35A (RMS maximum)
Gate trigger voltage: 3V maximum
Non-repetitive surge current: 300A @ 50Hz, 330A @ 60Hz
Gate trigger current: 50mA maximum
Hold current: 30mA maximum
Operating temperature range: -25°C to 125°C
Mounting configuration: Chassis Mount Module
Triac type classification: Standard
Regulatory compliance: RoHS Compliant, MSL Level 1

Both parts are manufactured by SanRex Corporation and classified as Active product status. Substitution is valid when all listed parameters match exactly.

Parameter Comparison

Parameter	TG35C60	TG35E60	Match Status
Manufacturer	SanRex Corporation	SanRex Corporation	Identical
Category	Thyristors	Thyristors	Identical
Triac Type	Standard	Standard	Identical
Voltage - Off State	600 V	600 V	Identical
Current - On State (It (RMS)) (Max)	35 A	35 A	Identical
Voltage - Gate Trigger (Vgt) (Max)	3 V	3 V	Identical
Current - Non Rep. Surge 50Hz	300 A	300 A	Identical
Current - Non Rep. Surge 60Hz	330 A	330 A	Identical
Current - Gate Trigger (Igt) (Max)	50 mA	50 mA	Identical
Current - Hold (Ih) (Max)	30 mA	30 mA	Identical
Configuration	Single	Single	Identical
Operating Temperature	-25°C ~ 125°C (TJ)	-25°C ~ 125°C (TJ)	Identical
Mounting Type	Chassis Mount	Chassis Mount	Identical
Package / Case	Module	Module	Identical
RoHS Status	RoHS Compliant	RoHS Compliant	Identical
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	Identical
Product Status	Active	Active	Identical

Engineering Selection Recommendations

Both the TG35C60 and TG35E60 are functionally equivalent TRIAC components suitable for direct substitution in 600V, 35A applications. Selection between these parts is based on availability and inventory status rather than electrical or mechanical differentiation.

The TG35C60 maintains 5292 units in current stock inventory. The TG35E60 substitute maintains 1067 units in current stock inventory. Both components carry Active product status designation, indicating ongoing manufacturer support and availability.

Both parts satisfy RoHS compliance requirements and carry MSL Level 1 rating, indicating no moisture sensitivity restrictions during storage and handling. ECCN classification EAR99 and HTSUS code 8541.30.0040 apply uniformly to both parts.

Selection should prioritize component availability from your supply chain while maintaining identical electrical performance and thermal operating range specifications.

Frequently Asked Questions (FAQ)

Q: Can TG35E60 replace TG35C60 in existing circuit designs?

A: Yes. The TG35E60 is a parametric equivalent with identical electrical ratings, gate trigger characteristics, surge current handling, and thermal operating range. Direct substitution is valid for all 600V, 35A TRIAC applications.

Q: Are there differences in package or mounting between these parts?

A: No. Both parts use identical Chassis Mount Module packaging. Physical dimensions, pin configuration, and mounting interface are equivalent.

Q: Do both parts meet the same regulatory and compliance standards?

A: Yes. Both TG35C60 and TG35E60 are RoHS Compliant with MSL Level 1 rating. ECCN and HTSUS classifications are identical.

Q: What determines whether a part can substitute for the TG35C60?

A: Substitution requires exact equivalence across all electrical parameters: 600V off-state voltage, 35A on-state current, 3V gate trigger voltage, 50mA gate trigger current, 30mA hold current, 300A/330A surge current ratings, and -25°C to 125°C operating temperature range. Mounting type and package configuration must also match.

Q: Is there a performance difference between TG35C60 and TG35E60?

A: No performance difference exists. Both parts are standard TRIAC devices with identical electrical characteristics and thermal specifications.

Q: Which part should be selected based on availability?

A: Selection should be based on current inventory status and supply chain lead times. Both parts are Active status products with equivalent performance. The TG35C60 currently has higher inventory availability at 5292 units compared to TG35E60 at 1067 units.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message