TFM-130-22-L-D-A Equivalent & Substitute Parts

Part Overview

The TFM-130-22-L-D-A is a surface mount rectangular connector header manufactured by Samtec Inc. as part of the Tiger Eye™ TFM series. This connector is an active product designed for board-to-board or cable applications with 60 positions arranged in 2 rows at 0.050" (1.27mm) pitch. The part is in active production status with 995 units currently in stock.

Identifying equivalent and substitute parts is necessary when addressing supply chain requirements, inventory optimization, or when specific design parameters allow for alternative configurations within the same connector family.

Substiute Parts

TFM-130-22-L-D-A

Samtec Inc.In Stock: 1062TFM-130-22-L-D-A Datasheet

Current PartRFQ

TFM-130-32-L-D-A

Samtec Inc.In Stock: 988TFM-130-32-L-D-A Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The TFM-130-32-L-D-A qualifies as a direct substitute based on the following matching electrical and mechanical parameters:

• Identical manufacturer (Samtec Inc.)
• Identical series (Tiger Eye™ TFM)
• Identical connector type (Header), contact type (Male Pin), and contact material (Phosphor Bronze)
• Identical number of positions (60) and rows (2)
• Identical pitch specifications: 0.050" (1.27mm) mating pitch and row spacing
• Identical mounting type (Surface Mount) and shrouding (Shrouded - 4 Wall)
• Identical fastening type (Push-Pull)
• Identical electrical ratings: 2.9A per contact and 275VAC
• Identical operating temperature range (-55°C ~ 125°C)
• Identical contact finish specifications (Gold mating, Tin post)
• Identical compliance certifications (ROHS3, UL94 V-0, REACH Unaffected)

The primary difference between these parts is the insulation height: TFM-130-22-L-D-A has 0.360" (9.14mm) insulation height, while TFM-130-32-L-D-A has 0.435" (11.05mm) insulation height. This dimensional variation allows for application-specific board spacing requirements while maintaining full electrical and functional compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both the TFM-130-22-L-D-A and TFM-130-32-L-D-A are active products with full ROHS3 compliance and REACH unaffected status. Selection between these parts should be based on the specific board spacing requirement of the application:

• TFM-130-22-L-D-A: Use when board-to-board spacing accommodates 0.360" (9.14mm) insulation height
• TFM-130-32-L-D-A: Use when board-to-board spacing requires 0.435" (11.05mm) insulation height

Both parts maintain identical electrical performance, current and voltage ratings, operating temperature range, and contact specifications. The choice is purely a mechanical fit consideration based on PCB layout constraints.

Frequently Asked Questions (FAQ)

Q: Are TFM-130-22-L-D-A and TFM-130-32-L-D-A electrically interchangeable?

A: Yes. Both parts have identical electrical ratings (2.9A per contact, 275VAC), contact materials (Phosphor Bronze), contact finishes (Gold mating, Tin post), and operating temperature ranges (-55°C ~ 125°C). The only difference is the insulation height dimension.

Q: What determines whether I can use TFM-130-32-L-D-A as a substitute for TFM-130-22-L-D-A?

A: The primary determining factor is the available board-to-board spacing in your application. TFM-130-32-L-D-A has a 0.075" (2.41mm) greater insulation height than TFM-130-22-L-D-A. Verify that your PCB layout can accommodate this increased height before substitution.

Q: Do both parts have the same mating pitch and row spacing?

A: Yes. Both parts feature 0.050" (1.27mm) mating pitch and 0.050" (1.27mm) row spacing, ensuring identical contact alignment and mating compatibility with corresponding receptacles.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts are ROHS3 compliant, UL94 V-0 rated, REACH unaffected, and have MSL 1 (Unlimited) moisture sensitivity level. They are functionally equivalent from a regulatory and compliance perspective.

Q: Can I use TFM-130-32-L-D-A in a design originally specified for TFM-130-22-L-D-A?

A: Only if your PCB layout and mechanical design accommodate the increased 0.435" (11.05mm) insulation height. All electrical and functional specifications remain identical, but the mechanical footprint difference must be evaluated for your specific application.