TFM-130-12-L-D-A-K Equivalent & Substitute Parts

Part Overview

The TFM-130-12-L-D-A-K is a surface mount rectangular connector header manufactured by Samtec Inc. as part of the Tiger Eye™ TFM series. This connector is an active product designed for board-to-board or cable applications with 60 positions arranged in 2 rows at 0.050" (1.27mm) pitch. The part is in active production status with 984 units currently in stock. Alternative models may be required due to inventory constraints, application-specific insulation height requirements, or design revisions necessitating compatible connector variants within the same series.

Substiute Parts

TFM-130-12-L-D-A-K

Samtec Inc.In Stock: 1080TFM-130-12-L-D-A-K Datasheet

Current PartRFQ

TFM-130-32-L-D-A-K

Samtec Inc.In Stock: 900TFM-130-32-L-D-A-K Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The TFM-130-32-L-D-A-K qualifies as a direct substitute for the TFM-130-12-L-D-A-K based on the following criteria:

Both parts share identical electrical and mechanical specifications across all critical parameters: same manufacturer (Samtec Inc.), same series (Tiger Eye™ TFM), identical connector type (Header), contact type (Male Pin), position count (60), row configuration (2 rows), pitch (0.050" / 1.27mm), row spacing (0.050" / 1.27mm), mounting type (Surface Mount), shrouding (Shrouded - 4 Wall), termination method (Solder), fastening type (Push-Pull), current rating (2.9A per Contact), voltage rating (275VAC), operating temperature range (-55°C ~ 125°C), and compliance certifications (ROHS3 Compliant, UL94 V-0).

The only dimensional difference is insulation height: TFM-130-12-L-D-A-K has 0.290" (7.37mm) while TFM-130-32-L-D-A-K has 0.435" (11.05mm). This variation does not affect electrical performance or contact functionality and represents a design variant within the same product family.

Parameter Comparison

Engineering Selection Recommendations

Both the TFM-130-12-L-D-A-K and TFM-130-32-L-D-A-K are active products from Samtec Inc. with identical compliance certifications (ROHS3 Compliant, UL94 V-0) and equivalent electrical ratings. Selection between these parts should be based on PCB layout requirements and available board space for the connector footprint.

The TFM-130-12-L-D-A-K with 0.290" (7.37mm) insulation height is suitable for applications with space constraints or compact board designs. The TFM-130-32-L-D-A-K with 0.435" (11.05mm) insulation height accommodates applications requiring greater clearance above the PCB surface or integration with taller mating connectors.

Both parts maintain identical electrical performance, current capacity (2.9A per Contact), voltage rating (275VAC), and operating temperature range (-55°C ~ 125°C). Inventory availability shows 984 units for TFM-130-12-L-D-A-K and 835 units for TFM-130-32-L-D-A-K.

Frequently Asked Questions (FAQ)

Q: Are TFM-130-12-L-D-A-K and TFM-130-32-L-D-A-K electrically interchangeable?

A: Yes. Both connectors have identical electrical specifications including current rating (2.9A per Contact), voltage rating (275VAC), contact material (Phosphor Bronze), and contact finish (Gold). They are electrically equivalent.

Q: What is the difference between these two part numbers?

A: The primary difference is insulation height. TFM-130-12-L-D-A-K has 0.290" (7.37mm) insulation height, while TFM-130-32-L-D-A-K has 0.435" (11.05mm). All other mechanical and electrical parameters are identical.

Q: Which part should I use for a space-constrained application?

A: The TFM-130-12-L-D-A-K with lower insulation height (0.290" / 7.37mm) is suitable for compact designs. The TFM-130-32-L-D-A-K with higher insulation height (0.435" / 11.05mm) is appropriate when additional clearance above the PCB is required.

Q: Are both parts RoHS compliant?

A: Yes. Both TFM-130-12-L-D-A-K and TFM-130-32-L-D-A-K are ROHS3 Compliant with UL94 V-0 material flammability rating.

Q: Can I use these connectors in high-temperature applications?

A: Yes. Both parts operate across the temperature range of -55°C to 125°C, suitable for industrial and automotive applications within this range.

Q: What is the pitch specification for these connectors?

A: Both connectors have 0.050" (1.27mm) mating pitch with 0.050" (1.27mm) row spacing in a 2-row, 60-position configuration.