TFM-110-02-L-D-P-TR Equivalent & Substitute Parts

Part Overview

The TFM-110-02-L-D-P-TR is a surface mount rectangular connector header manufactured by Samtec Inc. as part of the Tiger Eye™ TFM series. This connector is designed for board-to-board or cable applications with 20 positions arranged in 2 rows at 0.050" (1.27mm) pitch. The part is currently active in production with full inventory availability. Substitute parts are identified to provide alternative sourcing options when the primary part number is unavailable or when design flexibility permits component selection from equivalent alternatives within the same product family.

Substiute Parts

TFM-110-02-L-D-P-TR

Samtec Inc.In Stock: 1543TFM-110-02-L-D-P-TR Datasheet

Current PartRFQ

TFM-110-02-L-D-K-TR

Samtec Inc.In Stock: 1333TFM-110-02-L-D-K-TR Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TFM-110-02-L-D-P-TR is determined by strict equivalence across the following critical parameters:

• Connector type, contact type, and gender (Header, Male Pin)
• Number of positions and row configuration (20 positions, 2 rows)
• Mating pitch and row spacing (0.050" / 1.27mm)
• Mounting technology (Surface Mount)
• Shrouding configuration (Shrouded - 4 Wall)
• Termination method (Solder)
• Fastening mechanism (Push-Pull)
• Electrical ratings (2.9A per contact, 275VAC)
• Operating temperature range (-55°C ~ 125°C)
• Material specifications and compliance certifications

The substitute part TFM-110-02-L-D-K-TR shares identical specifications across all these parameters, confirming direct substitutability within the Tiger Eye™ TFM series.

Parameter Comparison

Engineering Selection Recommendations

Both the TFM-110-02-L-D-P-TR and TFM-110-02-L-D-K-TR are active production parts from Samtec Inc. with identical electrical, mechanical, and environmental specifications. Selection between these parts may be based on inventory availability or supply chain considerations. Both parts maintain ROHS3 compliance and UL94 V-0 flammability certification, meeting regulatory requirements for industrial and commercial applications. The MSL rating of 1 (Unlimited) indicates no moisture sensitivity constraints during storage or handling. Current inventory levels are 1491 units for TFM-110-02-L-D-P-TR and 1241 units for TFM-110-02-L-D-K-TR.

Frequently Asked Questions (FAQ)

Q: Are TFM-110-02-L-D-P-TR and TFM-110-02-L-D-K-TR directly interchangeable?

A: Yes. Both parts are identical in all electrical, mechanical, and environmental parameters. They share the same connector type, position count, pitch, mounting method, and electrical ratings. Direct substitution is supported without design modification.

Q: What determines substitutability for this connector header?

A: Substitutability is determined by equivalence in connector type (Header), contact configuration (Male Pin, 20 positions, 2 rows), mating pitch (0.050" / 1.27mm), mounting technology (Surface Mount), shrouding (4 Wall), termination (Solder), fastening (Push-Pull), and electrical ratings (2.9A per contact, 275VAC). All these parameters must match for direct substitution.

Q: Are there any differences in the part numbers TFM-110-02-L-D-P-TR and TFM-110-02-L-D-K-TR?

A: The part numbers differ only in the designator characters. All functional and electrical specifications are identical. The difference is encoded in the part number suffix but does not affect performance or compatibility.

Q: What is the operating temperature range for these connectors?

A: Both parts operate across -55°C to 125°C, suitable for industrial and commercial temperature environments.

Q: Are these connectors RoHS compliant?

A: Yes. Both TFM-110-02-L-D-P-TR and TFM-110-02-L-D-K-TR are ROHS3 compliant and meet REACH requirements.

Q: What is the current handling capability per contact?

A: Each contact is rated for 2.9A at 275VAC, providing adequate capacity for standard signal and low-power applications.

Q: What packaging format is used for these connectors?

A: Both parts are supplied in Tape & Reel (TR) packaging, suitable for automated pick-and-place assembly processes.