TFC-120-02-F-D-A-P-TR Equivalent & Substitute Parts

Part Overview

The TFC-120-02-F-D-A-P-TR is a rectangular connector header manufactured by Samtec Inc. from the Tiger Eye™ TFC series. This surface mount connector features 40 positions arranged in 2 rows with 0.050" (1.27mm) pitch spacing, designed for board-to-board or cable applications. The part is currently active in production status and available in Tape & Reel (TR) packaging. Identifying equivalent substitute parts is necessary when Tape & Reel packaging is unavailable or when alternative packaging formats better suit procurement, inventory, or assembly requirements.

Substiute Parts

TFC-120-02-F-D-A-P-TR

Samtec Inc.In Stock: 1193TFC-120-02-F-D-A-P-TR Datasheet

Current PartRFQ

TFC-120-02-F-D-A-K-TR

Samtec Inc.In Stock: 1254TFC-120-02-F-D-A-K-TR Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TFC-120-02-F-D-A-P-TR is determined by strict equivalence across the following electrical and mechanical parameters:

• Manufacturer and series consistency (Samtec Inc., Tiger Eye™ TFC)
• Connector type, contact type, and gender (Header, Male Pin)
• Position count and row configuration (40 positions, 2 rows)
• Pitch specifications (0.050" mating pitch, 0.050" row spacing)
• Mounting method (Surface Mount)
• Shrouding design (Shrouded - 4 Wall)
• Electrical ratings (3.1A per contact, 275VAC)
• Operating temperature range (-55°C ~ 125°C)
• Compliance certifications (ROHS3 Compliant, UL94 V-0)

The primary difference between the main part and its substitute is packaging format: Tape & Reel (TR) versus Cut Tape (CT). Both formats contain identical connector specifications and are suitable for automated assembly processes.

Parameter Comparison

Engineering Selection Recommendations

Both the TFC-120-02-F-D-A-P-TR and TFC-120-02-F-D-A-K-TR are active production parts from Samtec Inc. with identical electrical, mechanical, and compliance specifications. Selection between these parts is determined solely by packaging requirements:

The TFC-120-02-F-D-A-P-TR in Tape & Reel (TR) packaging is optimized for high-volume automated assembly operations where continuous reel feeding is standard.

The TFC-120-02-F-D-A-K-TR in Cut Tape (CT) packaging is suitable for lower-volume production runs, manual assembly processes, or when reel-based feeding equipment is unavailable.

Both parts maintain ROHS3 compliance, UL94 V-0 flammability rating, and identical moisture sensitivity levels. Current inventory availability differs between packaging formats, with the Cut Tape variant showing 1185 pieces in stock compared to 1131 pieces for the Tape & Reel variant.

Frequently Asked Questions (FAQ)

Q: Are TFC-120-02-F-D-A-P-TR and TFC-120-02-F-D-A-K-TR electrically and mechanically identical?

A: Yes. Both parts are functionally equivalent across all electrical parameters (current rating, voltage rating, operating temperature), mechanical dimensions (pitch, row spacing, contact length), and material specifications (contact finish, insulation material, shrouding design).

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging supplies components on a continuous reel suitable for automated pick-and-place assembly equipment. Cut Tape (CT) packaging provides individual components or small quantities cut from tape, typically used for manual assembly, prototyping, or lower-volume production.

Q: Can I use Cut Tape packaging in an automated assembly line designed for Tape & Reel?

A: No. Automated pick-and-place equipment requires continuous reel feeding. Cut Tape packaging requires manual component placement or different feeder equipment.

Q: Are both parts RoHS compliant?

A: Yes. Both TFC-120-02-F-D-A-P-TR and TFC-120-02-F-D-A-K-TR are ROHS3 compliant.

Q: What is the moisture sensitivity level for these connectors?

A: Both parts have a Moisture Sensitivity Level (MSL) of 1, indicating unlimited shelf life without special moisture control requirements.

Q: Do these connectors require any special handling or storage conditions?

A: With MSL 1 rating, these connectors do not require desiccant packaging or controlled humidity storage. Standard industrial storage conditions are acceptable.