TEN 5-2411 Equivalent & Substitute Parts Reference

Part Overview

The Traco Power TEN 5-2411 is an isolated module DC-DC converter with a single 5V, 1A output and 18V to 36V input range, packaged in a 24-DIP module for through-hole mounting. It is rated at 5W, features short-circuit protection (SCP), and supports a working temperature range of -40°C to 85°C with derating. The product status is "Not For New Designs," making it necessary to identify alternative models that match the required electrical and mechanical parameters for continued design or replacement use.

Substiute Parts

TEN 5-2411

Traco PowerIn Stock: 1688TEN 5-2411 Datasheet

Current PartRFQ

REC7.5-1205SRW/H2/A/M

Recom PowerIn Stock: 12219REC7.5-1205SRW/H2/A/M Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts are grouped strictly based on the following key electrical and mechanical parameters:

• Output Voltage: Must be 5V
• Output Current: Must be at least 1A
• Power Rating: Minimum 5W
• Isolation Voltage: Minimum 1.5 kV
• Input Voltage Range: Must overlap with 18V–36V
• Package/Case: Same form factor (24-DIP Module)
• Mounting Type: Through-hole only
• Compliance: ROHS3 and REACH
• Application: ITE (Commercial)
• Features: Short-circuit protection (SCP)
• Operating Temperature: Supports industrial grade

Only parts conforming to these parameters are considered valid substitutes within this reference.

Parameter Comparison

Engineering Selection Recommendations

The TEN 5-2411 has a status of "Not For New Designs." Substitute selection must utilize parts with equivalent output voltage, matching or higher output current, compatible form factor, and verified product compliance certifications: ROHS3, REACH, ECCN EAR99. REC7.5-1205SRW/H2/A/M meets all provided compliance and regulatory criteria and shares the specified module packaging parameters and application suitability.

Frequently Asked Questions (FAQ)

Q: What are the essential parameters when choosing a substitute for TEN 5-2411?
A: Substitute selection requires matching output voltage, output current, input voltage compatibility, isolation rating, mounting type, form factor, and compliance certifications.

Q: Can the REC7.5-1205SRW/H2/A/M be used in place of TEN 5-2411 in the same PCB footprint?
A: Both parts use a 24-DIP module with through-hole mounting. The lead count differs (7 vs. 8), requiring verification based on board layout compatibility.

Q: Are operating temperature and efficiency comparable?
A: The TEN 5-2411 operates at -40°C ~ 85°C with derating, while the REC7.5-1205SRW/H2/A/M operates at -40°C ~ 71°C. Efficiency is 83% vs. 82%.

Q: Is regulatory and environmental compliance identical?
A: Both parts are ROHS3 compliant and REACH unaffected. ECCN and HTSUS codes are identical.

Q: Does the substitute cover all required electrical ratings?
A: REC7.5-1205SRW/H2/A/M meets or exceeds output current, power, and isolation voltage requirements, with a matching output voltage specification. Input voltage ranges must be verified for overlap depending on the application voltage source.