Equivalent & Substitute Parts Reference: TEN 3-4810

Part Overview

The Traco Power TEN 3-4810 is an isolated DC DC converter module that provides a single 3.3V output at up to 600mA, with a 36V–72V input voltage range and 2W power rating. It features a 1.5 kV isolation rating, through-hole mounting, and a 24-DIP Module package. The product status is "Not For New Designs," indicating it is not recommended for new development and that alternative or substitute parts are required for ongoing production or new applications.

Substiute Parts

TEN 3-4810

Traco PowerIn Stock: 907TEN 3-4810 Datasheet

Current PartRFQ

JCA0348S03

XP PowerIn Stock: 1110JCA0348S03 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution candidates for isolated DC DC converter modules must exactly match or exceed these electrical and mechanical parameters: input voltage range, output voltage and current, power rating, isolation voltage, number of outputs, mounting type, and package dimensions. Regulatory compliance (e.g., RoHS3) and approval agency certifications are required for compatibility in controlled applications. Substitute models listed here strictly conform to these parameters.

Parameter Comparison

Engineering Selection Recommendations

Substitute selection is based on the product status change of TEN 3-4810 ("Not For New Designs") and the similar or superior electrical, mechanical, and compliance parameters of JCA0348S03. Both models are ROHS3 compliant and listed under ECCN EAR99. Agency approvals and package similarity allow direct substitution in applications requiring ITE (Commercial) category modules. The substitute part is active and fulfills current inventory requirements.

Frequently Asked Questions (FAQ)

Q1: What are the key requirements for substituting DC DC converter modules in this category?
A1: Substitution is based on matching the input voltage range, output voltage, output current, power rating, isolation voltage, number of outputs, mounting type, package dimensions, and regulatory compliance.

Q2: Is the substitute part compatible with the original package footprint?
A2: Both TEN 3-4810 and JCA0348S03 use a 24-DIP Module, 7 Leads package, supporting direct PCB footprint compatibility.

Q3: Are the regulatory compliance certifications equivalent for both parts?
A3: Both parts are ROHS3 compliant and have ECCN EAR99 classification. Agency approvals are provided for both modules.

Q4: Does the substitute part support comparable operational environments?
A4: The substitute part offers an operating temperature of -40°C ~ 100°C, while the original is rated -40°C ~ 85°C (With Derating).

Q5: What is the difference in output power between the main and substitute part numbers?
A5: Main part TEN 3-4810 is rated at 2 W, while substitute JCA0348S03 is rated at 3 W. Output current capability is also increased in the substitute.