Equivalent & Substitute Parts for Traco Power TEN 3-2413

Part Overview

Traco Power TEN 3-2413 is a DC DC CONVERTER offering isolated 15V output at 3W, designed for ITE (Commercial) applications, with through hole mounting in a 24-DIP Module. The part is marked “Not For New Designs,” making it necessary to identify compatible substitutes for ongoing production and support. Equivalent models are selected using only the explicit parameters provided for technical interchangeability within the isolated 3W DC DC Converter category.

Substiute Parts

TEN 3-2413

Traco PowerIn Stock: 1060TEN 3-2413 Datasheet

Current PartRFQ

REC3-2415SRWZ/H4/A

Recom PowerIn Stock: 12467REC3-2415SRWZ/H4/A Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts are grouped based strictly on the following explicit, matching parameters:

• Input voltage range: 18V to 36V
• Output voltage: 15V
• Maximum output current: 200mA
• Output power: 3W
• Isolation voltage: at least equal to or higher than original
• Through hole mounting and same package class (24-DIP Module)
• Operating temperature range: -40°C to 85°C
• RoHS/REACH compliance
  Only parts fully matching these parameters are included as equivalents.

Parameter Comparison

Engineering Selection Recommendations

TEN 3-2413 is designated “Not For New Designs,” making it suitable only for legacy support. Substitute part REC3-2415SRWZ/H4/A is active and maintains compliance with ROHS3 and REACH, ensuring continued regulatory conformity. Both parts share equivalent input/output ratings, package category, mounting style, and operating temperature range. Approval and certification statuses are noted as provided, with no additional categories introduced. Engineering selection should be governed strictly by documented compliance and technical matching within the specified categories.

Frequently Asked Questions (FAQ)

Q1: What electrical matching criteria are used for finding substitutes for TEN 3-2413?
A1: Only parts with identical input voltage range (18V to 36V), output voltage (15V), output current (200mA), output power (3W), and isolation voltage (≥1.5 kV) are considered.

Q2: How is package compatibility ensured?
A2: Substitute parts are included only if they use a 24-DIP Module through hole mounting package. Number of leads is noted for mechanical reference.

Q3: Are substitute parts compliant with RoHS and REACH regulations?
A3: Both TEN 3-2413 and REC3-2415SRWZ/H4/A are listed as ROHS3 compliant and REACH unaffected, maintaining regulatory compatibility.

Q4: What differences exist in the isolation voltage parameter?
A4: The substitute REC3-2415SRWZ/H4/A offers a higher isolation voltage (4 kV) compared to TEN 3-2413 (1.5 kV). Both values meet or exceed the original specification.

Q5: Is medical certification referenced for substitutes?
A5: REC3-2415SRWZ/H4/A specifies suitability for medical alongside ITE (Commercial) applications, per explicit input.

Q6: Should part number leads count affect selection?
A6: Both parts belong to the same package class (24-DIP Module), but have differing leads count (7 versus 8). This should be reviewed based on provided mechanical parameters.

Q7: Are there any differences in product status that affect substitute selection?
A7: TEN 3-2413 is “Not For New Designs” while REC3-2415SRWZ/H4/A is “Active,” supporting direct replacement in ongoing designs.