Equivalent & Substitute Parts Reference for TEN 25-2413

Part Overview

The Traco Power TEN 25-2413 is an isolated DC-DC converter module featuring a single 15V, 2A output at 30W maximum power, designed for ITE (Commercial) applications. It supports a wide input voltage range of 18V to 36V, includes remote On/Off, OCP, OVP, and SCP features, and is packaged in a 7-DIP module with through-hole mounting. This part is classified as Not For New Designs, making it necessary to identify alternative models for ongoing projects and new design considerations.

Substiute Parts

TEN 25-2413

Traco PowerIn Stock: 1150TEN 25-2413 Datasheet

Current PartRFQ

Key Parameters

Substitute Part Grouping Explanation

The substitute part grouping for isolated DC-DC converter modules is determined strictly by the following key parameters: input voltage range (18V to 36V), output voltage (15V), output current (2A), output power (30W), voltage isolation (1.5 kV), number of outputs (1), features (Remote On/Off, OCP, OVP, SCP), efficiency (89%), mounting type (through hole), package/case (7-DIP Module, 6 Leads), size/dimension (50.8mm x 40.6mm x 9.5mm), RoHS status (ROHS3 Compliant), and operating temperature (-40°C ~ 85°C with derating).

Parameter Comparison

Engineering Selection Recommendations

TEN 25-2413 is designated as Not For New Designs. Engineering selection should consider only those substitute parts that match all provided electrical, mechanical, and environmental specifications and maintain ROHS3 compliance. No alternative part numbers are listed; no direct substitutes are available in the specified input.

Frequently Asked Questions (FAQ)

Q: What substitution criteria are required for DC-DC converter modules in this category?
A: Criteria include matching input voltage range, output voltage, output current, output power, isolation rating, output count, features, efficiency, mounting type, package/case, size/dimensions, RoHS status, and operating temperature range.

Q: Can I use a part with different dimensions or mounting type?
A: Substitute parts must have the same dimensions and mounting type as the original part, as these impact mechanical and system compatibility.

Q: Why is it important to match the specified features such as remote On/Off, OCP, OVP, and SCP?
A: All features must be present in substitute models to ensure functional and safety equivalence in the intended application.

Q: Are compliance and product status relevant in selecting a substitute?
A: RoHS3 status and current product availability should always align with project and regulatory requirements. Product status "Not For New Designs" identifies the need for alternate selections in new design activity.

Q: Are any direct substitute part numbers available for TEN 25-2413 based on the provided data?
A: No direct substitute part numbers are listed in the provided substitute part list.