TEN 25-1213 Equivalent & Substitute Parts Reference

Part Overview

The Traco Power TEN 25-1213 is a DC-DC converter in the 30W TEN 25 series. It features isolated module topology, 1 output of 15V at 2A, and is designed for ITE (Commercial) applications. The product status is “Not For New Designs,” making it necessary for engineers to consider possible alternative models in designs requiring continued support or ongoing new production.

Substiute Parts

TEN 25-1213

Traco PowerIn Stock: 965TEN 25-1213 Datasheet

Current PartRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the Traco Power TEN 25-1213 DC DC converter is strictly determined by matching the following parameters:

• Output voltage and current: 15V, 2A
• Input voltage range: 9V – 18V
• Maximum power: 30W
• Output count: 1
• Isolation voltage: 1.5 kV
• Features: Remote On/Off, overcurrent protection (OCP), overvoltage protection (OVP), short circuit protection (SCP)
• Mechanical compatibility: Through Hole, 7-DIP Module, 6 Leads, size 2.00" x 1.60" x 0.37"
• Environmental and compliance status: ROHS3, REACH, MSL, ECCN, HTSUS

Any substitute part must meet all listed electrical, mechanical, and compliance parameters.

Parameter Comparison

Engineering Selection Recommendations

The Traco Power TEN 25-1213 is classified as “Not For New Designs.” There are no direct substitute part numbers listed according to the provided parameters. Selection for ongoing designs should consider compliance requirements including ROHS3, REACH status, and any relevant MSL, ECCN, or HTSUS classifications. Only parts matching all specified criteria are suitable.

Frequently Asked Questions (FAQ)

Q: Why are there no direct substitute parts listed for TEN 25-1213?
A: No direct substitute part numbers matching all required electrical, mechanical, and compliance parameters are available in the provided data.

Q: Can I use a different package if another 15V 2A DC DC converter is available?
A: Only through hole, 7-DIP Module, 6 Leads with the specified size are compatible based on the given parameters.

Q: What compliance requirements must substitutes meet?
A: Any substitute must be ROHS3 Compliant and REACH Unaffected, matching the main part’s compliance status.

Q: How critical is the isolation voltage in substitution?
A: The substitute must have a 1.5 kV isolation voltage, following the allowed parameters for safe and proper function.

Q: Is the input voltage range flexible?
A: Substitutes must support 9V to 18V input range exactly as specified. Deviation is not allowed per the given criteria.