Equivalent & Substitute Parts Reference for TEN 20-1211

Part Overview

The TEN 20-1211 is a Traco Power isolated DC-DC converter module, delivering a single regulated 5V output at up to 4A (20W) with a 9V–18V input, in a 6-DIP through-hole package. It is designed for ITE commercial applications and features short circuit protection (SCP), 1.5kV isolation, and operates from -40°C to +85°C with derating. TEN 20-1211 is ROHS3 compliant and REACH unaffected.

This part is presently classified as "Not For New Designs," necessitating identification of equivalent or substitute components exclusively within the parameters provided.

Substiute Parts

TEN 20-1211

Traco PowerIn Stock: 807TEN 20-1211 Datasheet

Current PartRFQ

JCK2012S05

XP PowerIn Stock: 1142JCK2012S05 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The substitute part grouping is strictly determined by matching functional and mechanical parameters, which include:

• DC-DC converter module type (Isolated)
• Single output channel
• Input voltage range: 9V–18V
• Output voltage: 5V
• Maximum output current: 4A
• Output power: 20W
• Voltage isolation rating
• Application: ITE (Commercial)
• Features (e.g., SCP)
• Operating temperature range
• Efficiency rating
• Mounting type: Through Hole
• Package: 6-DIP Module
• Size / dimension
• Compliance status (RoHS, MSL)
• Classification and customs codes (ECCN, HTSUS)

Only parts explicitly listing matching parameters are considered valid substitutes.

Parameter Comparison

Engineering Selection Recommendations

The TEN 20-1211 (Not For New Designs) requires replacement in new or updated assemblies. The JCK2012S05 from XP Power is available and classified as Active. Both parts are ROHS3 compliant and share ECCN and HTSUS codes. Moisture Sensitivity Level (MSL) for JCK2012S05: 1 (Unlimited); for TEN 20-1211: Not Applicable. No additional compliance or certification differences are present in the provided data.

Frequently Asked Questions (FAQ)

Q1: What parameters are critical for substituting TEN 20-1211?
A1: Only parts matching type (Isolated Module), number of outputs, input voltage range, output voltage/current, power, package/case, mounting type, size/dimension, application, and compliance can be considered.

Q2: Is the package size/format compatible between TEN 20-1211 and JCK2012S05?
A2: Both parts are specified as 6-DIP Module with dimensions 2.00" L x 1.00" W x 0.40" H (50.8mm x 25.4mm x 10.2mm).

Q3: Do both parts satisfy application requirements for ITE (Commercial)?
A3: Both TEN 20-1211 and JCK2012S05 list ITE (Commercial) as their application.

Q4: What compliance standards are met by the substitute part?
A4: JCK2012S05 is ROHS3 compliant with MSL level 1 (Unlimited).

Q5: Why is substitution necessary for TEN 20-1211?
A5: TEN 20-1211 is designated “Not For New Designs”, indicating it is not suitable for incorporation into new assemblies based on provided status.