Equivalent & Substitute Parts for TEN 10-2413

Part Overview

The Traco Power TEN 10-2413 is an isolated DC-DC converter module, providing a regulated 15V output at up to 670mA from an 18V to 36V input range, with 10W max output power. This device features over-current, over-voltage, and short-circuit protection, supports ITE (Commercial) applications, and is housed in a 5-DIP Module, 4 Leads, with through-hole mounting. The product status is "Not For New Designs," indicating that alternative models should be considered for new projects that require continued lifecycle support and active manufacturer sourcing.

Substiute Parts

TEN 10-2413

Traco PowerIn Stock: 987TEN 10-2413 Datasheet

Current PartRFQ

JCH1024S15

XP PowerIn Stock: 12432JCH1024S15 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute DC-DC converter modules are selected strictly based on matching key electrical and mechanical parameters. For isolated DC-DC converters in this form factor, criteria for direct substitution consist of: identical output voltage (15V), output power rating (10W), input voltage range (18V–36V), similar maximum output current, voltage isolation rating (1.5 kV), number of outputs (1), protection features, ITE (Commercial) application support, through-hole mounting, and matching mechanical package dimensions. Only parts that meet all these parameters and compliance status are considered valid substitutes.

Parameter Comparison

Engineering Selection Recommendations

The TEN 10-2413 is classified as "Not For New Designs." Its substitute, JCH1024S15 from XP Power, is "Active," and both parts adhere to ROHS3 compliance. Substitutes must match electrical ratings, mechanical dimensions, and environmental compliance, with product status favoring ongoing availability and direct supplier sourcing for new applications.

Frequently Asked Questions (FAQ)

Q: What determines if JCH1024S15 is a compatible substitute for TEN 10-2413?
A: Compatibility is determined strictly by matching input and output voltage ratings, output power, current limits, voltage isolation, number of outputs, mounting type, package size, and compliance status.

Q: Is the package and footprint identical for both DC-DC converters?
A: Both TEN 10-2413 and JCH1024S15 feature a 5-DIP module through-hole package with size 2.00" L x 1.00" W x 0.40" H, supporting direct mechanical substitution.

Q: Are there differences in protection features between the main part and its substitute?
A: The substitute JCH1024S15 supports over-current and short-circuit protection; TEN 10-2413 specifies over-current, over-voltage, and short-circuit protection.

Q: How is environmental and safety compliance ensured?
A: Both parts specify ROHS3 compliance, suitable for use in environmentally regulated designs.

Q: What should be verified for system-level compatibility?
A: All selection criteria are based strictly on the provided parameters: voltage, current, power, package, mounting, temperature, isolation, and regulatory compliance. No additional verification beyond these stated parameters is required for substitution.