TE1202T Aluminum Electrolytic Capacitor - Equivalent & Substitute Parts

Part Overview

The TE1202T is a 5 µF, 25 V aluminum electrolytic capacitor in axial configuration, manufactured by Vishay Sprague. This component is classified as Active product status and is designed for general-purpose applications requiring through-hole mounting. The TE1202T operates across a temperature range of -40°C to 105°C with a rated lifetime of 2000 hours at 85°C. Finding equivalent substitute parts is necessary when the original part becomes unavailable or when design requirements call for improved compliance specifications.

Substiute Parts

TE1202T

Vishay SpragueIn Stock: 770TE1202T Datasheet

Current PartRFQ

TE1202-E3

Vishay SpragueIn Stock: 1654TE1202-E3 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TE1202T is determined by strict equivalence across the following critical parameters:

• Capacitance Value: 5 µF (exact match required)
• Voltage Rating: 25 V (exact match required)
• Tolerance: -10%, +75% (exact match required)
• Operating Temperature Range: -40°C ~ 105°C (exact match required)
• Lifetime Specification: 2000 Hrs @ 85°C (exact match required)
• Polarization: Polar (exact match required)
• Mounting Type: Through Hole (exact match required)
• Package Configuration: Axial, Can (exact match required)
• Physical Dimensions: 0.248" Dia x 0.512" L / 6.30mm x 13.00mm (exact match required)

The TE1202-E3 qualifies as a direct substitute because it maintains identical electrical and mechanical specifications across all parameters listed above. The primary distinction between these parts is compliance certification status.

Parameter Comparison

Engineering Selection Recommendations

Both TE1202T and TE1202-E3 are functionally equivalent for circuit applications requiring 5 µF at 25 V in axial through-hole configuration. Selection between these parts should be based on regulatory and compliance requirements:

The TE1202-E3 is the preferred selection for applications subject to RoHS3 compliance mandates, as it meets ROHS3 Compliant certification. The TE1202T remains suitable for applications where RoHS compliance is not a requirement.

Both parts maintain identical electrical performance, thermal characteristics, and physical form factor, ensuring direct interchangeability at the circuit board level.

Frequently Asked Questions (FAQ)

Q: Can TE1202-E3 replace TE1202T in existing designs?

A: Yes. The TE1202-E3 is a direct substitute with identical capacitance, voltage rating, tolerance, temperature range, lifetime specification, polarization, mounting type, and physical dimensions. No circuit modifications are required.

Q: What is the primary difference between TE1202T and TE1202-E3?

A: The TE1202-E3 carries ROHS3 Compliant certification, while the TE1202T is RoHS non-compliant. All electrical and mechanical specifications are identical.

Q: Are these parts pin-compatible?

A: Yes. Both parts use axial through-hole mounting with identical lead spacing and physical dimensions (0.248" Dia x 0.512" L), ensuring direct board-level compatibility.

Q: What applications are these capacitors suitable for?

A: Both parts are rated for general-purpose applications operating across -40°C to 105°C with a 2000-hour lifetime at 85°C.

Q: Does the RoHS3 compliance of TE1202-E3 affect electrical performance?

A: No. RoHS3 compliance is a material composition and environmental certification. Electrical performance, capacitance value, voltage rating, and all operating characteristics remain identical to the TE1202T.